|
|
Long-distance belt transport
Baričiak, Petr ; Kašpárek, Jaroslav (referee) ; Zeizinger, Lukáš (advisor)
The bachelor thesis deals with the calculation and design of a conveyor belt with a transported quantity of 3 500 t/h with a length of 300 m and an elevation of 22 m. The introductory part is devoted to detailed research of individual components of belt conveyor. In the following chapters, a functional calculation according to ISO 5048, strength check of the shaft, bearings of the driving pulley and conveyor belt is performed. The last part of the thesis describes the choice of parts, which was based on strength and calculation chapters. The result of the entire thesis is the drawing documentation containing the drawing of the assembly.
|
|
|
Belt conveyor for brown coal
Bezděk, Marek ; Pokorný, Přemysl (referee) ; Malášek, Jiří (advisor)
The main key in this bachelor thesis is to calculate and design conveyor belt for transport of brown coal for the transport capacity of 140,000 kg per hour and the height difference of 10,5 m and axial distance between the drums at the both ends of 50 m. First part of the work is focused on the main parts of the conveyor belt construction. Then follows the part with the calculation of conveyor belt according to norm ČSN ISO 5048, which is then used for designing of the main parts of the conveyor belt and its dimensions. The thesis is extended by the required technical drawings.
|
|
|
Belt conveyor for crushed limestone
Haša, Jakub ; Pokorný, Přemysl (referee) ; Malášek, Jiří (advisor)
The aim of this bachelor thesis is to present a structural design of a belt conveyor for crushed limestone. The transport distance is 28 meters with superelevation of 7 meters. The traffic performance of the belt is set at 43,000 kg.h-1. The structural design depends on calculation according to the standard ČSN ISO 5048. The study contains brief description of basic parts, followed by control calculation of bulk material and drive pulley. The attachment includes necessary drawing documentation.
|
|
|
Belt conveyor
Chroust, Martin ; Pokorný, Přemysl (referee) ; Jonák, Martin (advisor)
This bachelor’s thesis deals with an issue of a belt conveyor for transportation of dry sand. The aim of this thesis is to design a constructional solution of belt conveyor for specific technical parameters, which are transport power of 100,000 kg per hour, the high difference of 5 m and the axial distance between pulleys of 40 m. The thesis includes a short description of the belt conveyor and its main parts, functional calculation according to the current norm ČSN 5048 and the selection of the constructional components provided by the company’s catalogues. Designs of tensioning device, drive of the conveyor and strength calculations of selected parts are also included in this thesis. Finally, the thesis is extended by the required technical drawings.
|
|
|
Belt conveyor for crushed limestone
Kadyrgozhin, Yermek ; Pokorný, Přemysl (referee) ; Malášek, Jiří (advisor)
The principle of this thesis is to design and calculation of belt conveyor for transport of crushed limestone with the capacity of 47,000 kg per hour, a height difference of 5,3 meters and 21,7 meters axial distance. The thesis includes a brief description of the main parts of the belt conveyor, the functional calculations according to standard ČSN ISO 5048, the determination of the main dimensions, the design of the drive and conveyor belt tensioning device. It is also performed stress analysis of selected parts of the conveyor belt, and analysis of the characteristics of the conveyed material. The thesis is accompanied by all the necessary technical drawings.
|
|
|
Belt conveyor for recycle aggregate
Macek, Tomáš ; Škopán, Miroslav (referee) ; Malášek, Jiří (advisor)
This work deals with design of belt conveyor for transport of recycled aggregate. The first part of the work thesis describes the belt conveyor and gives an overview of manufacturers of belt conveyors. In the next part there is a functional calculation according to ISO ČSN 5048 is performed from the specified parameters, which are the length of the conveyor, the height difference and transport performance. Further, there is the design of the individual components of the belt conveyor is made. In the last part, there is the strength control of the driven drum and the driven drum axis is performed. Work is completed with drawing documentation.
|
|
|
Bucket elevator
Sochor, Tomáš ; Malášek, Jiří (referee) ; Jonák, Martin (advisor)
The aim of this thesis is a design of a vertical bucket elevator which is to be used to transport cereal. The transport height is nineteen meters and transport capacity one hundred tons per hour. This thesis consists of a description of the vertical bucket elevator and its main parts which are mentioned in the introductory list. The thesis deals with functional and capacitive calculations, determining a drive and a tensioning device. Another calculation has the function of control a drive shaft, calculation of spring, lifespan of bearings and a calculation of the tensioning device. In addition, there is a design study according to the assignment.
|
|
|
Belt conveyor for crushed aggregate
Kohoutek, Martin ; Kašpárek, Jaroslav (referee) ; Jonák, Martin (advisor)
In this bachelor thesis is to implement the structural design of the conveyor belt for transporting of crushed aggregate of the granularity specified transport capacity 70000 kg/ h and entering the transport height of 7 m. In this paper briefly describes the main portion of the belt conveyor further functional calculations performed according to valid standards CSN ISO 5048, design of basic dimensions, drive, tensioning devices and stress analysis of selected parts of the conveyor belt. The work is accompanied by the required drawings.
|
|
|
Belt conveyor
Kvita, Josef ; Škopán, Miroslav (referee) ; Jonák, Martin (advisor)
The aim of this work is to design belt conveyor to transport gravel with traffic performance 60 t.h-1, 3 meters height difference and the distance between the axes of the drums 10 m. This work also contains a description of the basic parts of the conveyor, functional analysis according to ISO 5048 and the design of the main dimensions of the conveyor, conveyor drive and tensioning device. The work is accompanied by drawings.
|
|
|
Belt conveyor for crushed limestone
Salvet, Patrik ; Škopán, Miroslav (referee) ; Malášek, Jiří (advisor)
The bachelor’s thesis is focused on design and calculation of a belt conveyor for transportation of crushed limestone with a transport capacity of 105,000 kg/h, axial distance of 45 m and height difference of 8.5 m. The thesis contains a description of individual components of the belt conveyor, transported material and functional calculation of the conveyors drive including forces acting on the belt which was performed according to the standard ČSN ISO 5048. The thesis also contains selection of individual components of the belt conveyor and their strength calculation for chosen limit states. At last, the drawing documentation of conveyor assembly and stand weldment was made.
|
guest ::
