|
|
The utilization of elastomers in forming technologies
Knebl, Martin ; Císařová, Michaela (referee) ; Peterková, Eva (advisor)
The project developed within the bachelor study (branch B2339-00 Mechanical engineering) deals with creation of a review of technologies in the field of forming using elastomers to manufacture desired parts. On the basis of studying literature focused on forming problems the review of these special forming methods and their brief description were developed. Further, the project includes examples of forming machines currently using these methods and appropriate products. The data were obtained from internet sources.
|
|
|
The manufacture of hold-down arm by technology of fine blanking process
Mikyska, Josef ; Žák, Ladislav (referee) ; Peterková, Eva (advisor)
MIKYSKA Josef: The manufacture of hold-down arm by technology of fine blanking process. The diploma thesis deals with innovative technology of „hold-down arm“ by fine blanking technology. The component is made of steel plate no. 12 041.20, 3mm thick. The theoretical part presents possible solutions. In the project there are compared versions of fine blanking technology. Regarding the required size accuracy, surface quality and assumed series production of 600 000 pieces per year the fine blanking technology using V-ring was proposed as the innovative technology. On the basis of technological calculations the triple action hydraulic press GKP-F 100 (produced by Feintool) and a blanking tool were determined. The blanking tool solution is accomplished including calculations and futher documentation. Then, the project implies technical and economical evaluation of the present technology ( conventional blanking with consequentional cutting) and of the newly designed technology. According to the analysis using the newly designed production technology economic and time savings are achieved.
|
|
|
Technology project for production of part "No.2432-cover"
Bednář, Martin ; Šlais, Miroslav (referee) ; Rumíšek, Pavel (advisor)
The project developed in the framework of Bachelor's study presents a proposal of producing technology of cover "2432", part of the sheet. Based on literature research, the studies and on own experience has been produced this work. The issue of materials, cutting, piping, drawing, design of the tool, evaluation of economic and technological design production has been studied. On the basis of the combined instrument has been designed, constructed according to standards, and the use of existing machinery. To resolve it was accounted economic assessment, which enabled decision-making between the semi-finished products for production. It was found that current production is not economically advantageous, compared to the options proposed. It has been ensured and the complex layout of machines in the area of existing production.
|
|
|
The manufacturing of feed sheet metal component
Pašalov, Tomáš ; Matušková, Jarmila (referee) ; Peterková, Eva (advisor)
The project made within the bachelor‘s program B2307 represents a proposal of the production technology of a cutting – a device made of steel plate 12020. On the basis of secondary literature dealing with the problematic topic of cutting technology a production of components in sequential device was designed. The sequential device is composed of normalized components and is resolved by using a universal easel. The cutting box is fixed to the compressing machine LEN 40 C (producer TOMA Industries, s.r.o.) with the nominal drawing force of 400 kN. The upper cutting edge and cutting form are made of tool steel class 19, heat-treated according to the drawing documentation.
|
|
|
The manufacturing of a flange by fineblanking technology
Povalač, Tomáš ; Šlais, Miroslav (referee) ; Peterková, Eva (advisor)
Aim of the project is to design new flange manufacturing technology. The flange is manufactured from stainless sheet 17 040 with 5 mm thickness and annual production batch of 800 000 pieces. Fineblanking process has been proposed as a new production technology. Technological and construction dimensions have been designed for the proposed technology. The fineblanking process is done by automated machine which consist of unwinding and straightening device, mechanical punch press and winding device. The manufactured part is punch pressed by tool which is located in the punch press in one lift. An economic evaluation compares current manufacturing technology with the proposed technology which is more economically convenient.
|
|
|
Design for production of lower part of charging station
Skalník, Petr ; Zavadil, Radek (referee) ; Podaný, Kamil (advisor)
This master’s thesis deals with a proposal of production technology of bottom part of charging station which is manufactured by DEL a.s. The component will be made of austenitic steel 17 349 which is 2 mm thick and its production series is 100 pieces a year. Punching and bending by MAG and TIG methods were chosen as the most suitable methods from the considered manufactoring technologies. Stud bolts will be welded by capacitor discharge. Based on the analysis of the technological calculations and the available machines in the manufacturing company was chosen that production is going to run through a punching press Pullmax 720, hydraulic CNC bending press OptiFlex 130 t 3,1 and welding sources TransPuls Synergic 3200, TransTig 1750 Puls and Nomark 65+. Technical and economical evaluation established cost calculation of semi-finished product material, welding wire, gaseous shield and stud bolts. The price of one piece is 3 117,70 Czech crowns.
|
|
|
Progressive forming die
Bednařík, Josef ; Řiháček, Jan (referee) ; Lidmila, Zdeněk (advisor)
This thesis is focused on the technologi of surface forming. It deals with the problematics of metal cutting, bending and drawing. It describes basic construction principles of utilities and requirements they have to meet in order to function properly. Furthermore, the thesis deals with a basic description of the construction and function of progressive forming tools. In the final part of the thesis, there is a debate about differences in manufacturing a semi-finished product depending whether it is a roll of metal which is handed in automatically, or a sheet of metal which is handed in manually.
|
|
|
Production of check valve's part
Růžička, Pavel ; Řiháček, Jan (referee) ; Císařová, Michaela (advisor)
The bachelor's thesis deals with the production innovation of the return valve disc component used in pumping technology. It is a component made of sheet metal with 3 mm thickness, the quality of material is according to ČSN 11 320. Existing production using cutting technology in a process tool will be replaced by a modern, more accurate and especially more economical method by precise cutting with a pressure edge. Based on the literature study of precision cutting, assessment of production technology and processing of design solutions, the cutting tool was designed to be able to significantly speed up and reduce the cost of production of the component. It will be placed in a three-acting press from Feintool, namely XTF Speed with a nominal force of 1500 kN. In the final technical and economic evaluation, it was proved that the newly designed technology is able to bring a component of the same nature to the market, but at a significantly lower price.
|
|
|
Manufacturing of cover
Březina, Stanislav ; Císařová, Michaela (referee) ; Podaný, Kamil (advisor)
The graduation theses worked up within the frame of the master study programme M21-P, field of study M-STM, sets up a proposal of the technology of the casing manufacture. The casing will be made of steel plate 11 305.21. In terms of a linear study of the questions of deep drawing and the calculation, drawing in the instrument with blankholder was suggested. The upper ejector is instrumental to the extension of the components. The intermediate product will be a roundel created by scission of the sneet panel of 1 mm size. The average of the intermediate product is 124,7 mm, while series 100 000 pieces a year. In terms of the calculations for the operation of drawing, the hydraulic press ZH 30 with specified forming power was selected.
|
|
|
The manufacturing of pulley cheek by technology of fineblanking process
Robotka, Tomáš ; Dvořák, Milan (referee) ; Peterková, Eva (advisor)
The Master´s thesis is elaborated within the framework of graduate´s study by institute of The Engineering technology and composed the technology of fineblanking process. The required component is made by stainless steel 17 240. The technological and constructional proportions were designed and calculated for required technology. The tool cuts out for one stroke one component, and is designed for mechanical three-active press MFA 1600 made by Feintool. The material’s strip of the scroll is situated in single sided rewinders QOPJ 160/650, and managed through leveling machines QRVP 160 into tools. The total force of press is 1600 kN. The main functional parts tools are made by steel 19 436, 19 437.
|
guest ::
