|
|
Single-family house in Troskotovice
Slunečková, Eliška ; Pilný, Ondřej (referee) ; Kalousek, Lubor (advisor)
This bachelor’s thesis aims to design a single-family passive house. Designed house is situated in Troskotovice on a flat building plot. The house is composed of two volumes: a bigger two-floor part with a gable roof and a smaller one-floor part with a mono-pitched green roof. The house is divided into a work zone in the north and east of the ground floor, a social zone in the south of the ground floor and a private zone placed on the first floor. The structural system of the building is a wood frame with timber truss and joist floors. A cast-in-place reinforced concrete slab is used for the foundation. The first part of the thesis includes architectural, structural, and material designs with assigned calculations such as acoustics, daylighting, energy certificate and fire safety calculations. The second part of my bachelor´s thesis consists of heat, ventilation, and plumbing designs with a focus on the ventilation design. An air/water heat pump is used for heating up domestic hot water and water for a wall heating system. The house is equipped with heat recovery ventilation system. Rainwater from roofs is collected in an accumulation retention tank and used for watering a garden and toilet. Excessive rainwater s infiltrated in an infiltration basin on the plot. Design of the house includes connection to the electrical grid, optical grid, water supply and sewage systems.
|
|
|
Residential House
Aberl, Tomáš ; Svatoňová, Hana (referee) ; Mohelníková, Jitka (advisor)
It is about new- built family house, which is standing alone on edge of the village Troubsko u Brna. The building´s height and architecturally are designed to fulfill requirements of surrounding buildings. The building has a basement smaller than the house itself and it has residential attic. The basement serves as a garage for two cars. The rest of the house is conceived as a single-family house, for one family of for people (two parents, two kids). Construction system is made by brick block of Porotherm, including the ceiling construction. The house has a gable roof which is designed as a roof without purlin system. As covering of the roof serves roof clay tiles.
|
|
|
Detached house
Rulf, Jan ; Nováková, Eva (referee) ; Kolář, Radim (advisor)
The subjekt of this bachelor’s thesis was to design a detached house and process the study and the design documentation for this house. House will serve as permanent housing for a 4 member family. The walls in basement will consist of permanent formwork, in ground floor will consist of cut brick blocks with an additional contact thermal insulation system ETICS, the ceiling will be reinforced concrete constructions and the house will have a non-moving flat roof. Part of the documentation i salso design covered parking place for two cars.
|
|
|
House on the slope
Vejr, Tomáš ; Maceková, Věra (referee) ; Myslín, Jiří (advisor)
Aim of this Bachelor thesis is to design a single-storied house with an attic in Suchomasty. The object is single-family detached house with a partial basement, and a garage. The house is designed for family of four. In the basement there is a garage, vestibuled entrance to the building, clothes closet, toilet room, utility room, and stock room. In the ground floor there is a hall and stairs, living room, kitchen and dining room, bathroom containing a toilet, bedroom, and room for house work. In the attic there are two children's rooms, two clothes closets, and bathroom containing a toilet. The vertical structure is made up from wooden platform frame consisting of supporting members 160 × 80 mm. Basement perimeter walls are made of KB blocks 290 × 390 × 190 mm filled with reinforced concrete. The horizontal structure above the basement is composed of reinforced floor with the 150 mm thickness, and above ground floor is composed of strip joist. There is a pitched roof on the house, purlin system.
|
|
|
Family House
Iral, Jakub ; Chybová, Tereza (referee) ; Matějka, Libor (advisor)
The objective of this thesis is to draw up the design documentation for the construction of a single-family house with a garage in Vodňany. It is a brick building with two above-ground floors and one underground floor. The roof is a shed. The vertical load-bearing structure, as well as the non-structural construction, is designed of Heluz ceramic bricks. The house is situated on the flat terrain. The total construction area is 210,62 m2.
|
|
|
Family House
Řehoř, David ; Dostálová, Darina (referee) ; Matějka, Libor (advisor)
The objective of this thesis is to draw up the design documentation for the construction of a single-family house. The detached house will include a two-car garage and will be built in the northern part of the village Moravské Knínice, a brick building with two above-ground floors and one underground. The roof is a saddleback. The vertical load-bearing structure, as well as the non-structural construction, is designed of Heluz ceramic bricks. The total construction area is 162,85 m2.
|
|
|
Performance simulation of a solar PV system for a single-family home
Veličková, Kateřina ; Hejčík, Jiří (referee) ; Charvát, Pavel (advisor)
Recently, renewable energy resources have become an urgent issue, as a result there are many papers focused on photovoltaic power plants and their performance simulations. These simulations not only allow us to assess the reduction of dependency on the fossil fuels, but also to calculate costs saving. This work considers the operation of a single-family house in the Czech Republic. However, a summary of photovoltaic potential factors is presented as well as the most common applications used for performance simulations of photovoltaic power plants. In practical part of this work, the load profile for common household is determined based on the data provided by the Energy Market Operator, alternatively the load profiles of two households owning a plug-in hybrid are also determined. The performance simulation is assembled in TRNSYS application and the results are summed up in the last chapter.
|
|
|
Single-family house
Kervitcer, Marek ; Berka, Pavel (referee) ; Donaťáková, Dagmar (advisor)
The theme of the bachelor´s thesis is a new building of a single-family house in Olšany, district Vyškov. It is a wooden house with two-floors, without a basement, with a garage. A first floor is connected with terrace. The building is roofed with a flat roof. Part of the house is faced with wood.
|
|
|
Wooden supporting structure of a family house in Roztoky u Jilemnice
Mejvald, Martin ; Balázs, Ivan (referee) ; Bukovská, Pavla (advisor)
This thesis is aimed at the design of wooden load-bearing structure for a detached house in the village of Roztoky u Jilemnice. It is a detached house with one storey and a living attic. The designed structure has a rectangular floor plan of 7,5 x 17 m with a height of 8 m. Glue laminated timber frames were chosen as a structural system. The building is covered by a gable roof with a 40° slope. The load bearing structure of the roof consists of wooden truss made of grown timber. The whole structure is further reinforced with steel bars. The structure was modelled in Dlubal RFEM 5.27.01, which was also used to determine the internal forces on the individual elements of the structure. The assessment of the elements was carried out in RFEM and partially verified by manual calculation. In addition, selected connections in the structure such as the bolted multi-slot connection were addressed.
|
|
|
Detached house
Černý, Dávid ; Majsniar, Michal (referee) ; Kolář, Radim (advisor)
The subject of this bachelors thesis was to design a single-family house in Brno Mokrá Hora and process the study and the design documentation for this house. Part of it will serve as permanent housing for a 4 member family and the second part as a distribution point for an online shop with 2 employees. The walls will consist of sand-lime bricks with an additional contact thermal insulation system ETICS, the ceiling will be reinforced concrete constructions and the house will have a walkable flat green roof. Part of the documentation is also the modification design of the surrounding terrain and the design of the car park for 2 cars and 1 light commercial vehicle. An interesting design choice is the height level of the roof, which is situated in the same level as the local road. Design documentation was processed using the program AutoCAD, the study and the visualization using both ArchiCAD and Artlantis 5.
|
guest ::
