|
|
Modern CAD Systems in Power Engineering
Strnad, Karel ; Vorel, Pavel (referee) ; Kuchyňková, Hana (advisor)
This work is focused on the short summary of history CAD systems and there are described the news, which brings the new version of programme Autodesk Inventor compared to the previous one. Then, in five steps there is described the procedure of parametric modelling in the programme Autodesk Inventor, from the sketch to final 3D model, including the drawing documentation. The work put particular emphasis on the explanation the basic modelling functions and environment in the same programme. An important part of this work is also the short explanation of some concepts relating to parametric modelling and animation of the model created in programme Autodesk Inventor.
|
|
|
CAD systems and design documentation
Kučera, Jaroslav ; Veselka, František (referee) ; Kuchyňková, Hana (advisor)
Project is specialized to work on modern CAD systems. Introduction treats of the development technical drawing and separates it into periods. There are compared two programs from Autodesk – AutoCAD a Inventor in the next part. Program Autodesk Inventor 2008 Suite is shown in more detail and project show innovations in this program compared to last versions. Work on Autodesk Inventor is shown at production of model of elementary electrotechnic equipment, technical documentation and presentation. This model, engineering drawings and presentation are the part of enclosure project. In end of project is attempt at the look to future of technical drawing.
|
|
|
Utilization of SolidWorks at power electrical engineering
Fazekas, Tamás ; Mikulčík, Aleš (referee) ; Veselka, František (advisor)
The purpose of the bachelor thesis was to became familiar with parametric CAD systems and create a simple model in high power electronics branch. The first part of the project summarizes the most known CAD systems. The second part deals with a specifics software:SolidWorks 2008. Finally, a simple model has been created in Solidworks 2008 from the power electronics branch. It is a model of an electric machine which is suitable for the research of the sliding contact.
|
|
|
Methods for solving the tolerance chains
Fiala, Lukáš ; Mazal, Pavel (referee) ; Svoboda, Petr (advisor)
This bachelor’s thesis deals with methods of solving dimensional chains. At the beginning, basic terms related to dimensional chains are explained. The next section describes worst case, statistical, group interchangeability and compensation methods. For better explanation, an example is solved for each method. Attention is also paid to systems in which the calculation of tolerance analysis can be performed. In conclusion, statistical and compensatory methods are used at the same assembly for comparison, and then, results are compared and evaluated. The thesis should provide the reader, in which cases it is appropriate to use a certain method.
|
|
|
Turbine drive for charger unit of bus
Obrlík, Jan ; Fiedler, Jan (referee) ; Škorpík, Jiří (advisor)
Diploma thesis deals with use of combustion chamber to drive the electric bus charging unit. Based on the research and analysis of operation economy, a turboexpander with an air pressure tank is selected to drive the charging unit. A thermodynamic design is created for this variant. Based on this design a unit layout is proposed. Layout drawings are created for the proposed layout.
|
|
|
Choreography analysis in sports aerobics
Handrejchová, Klára ; Hájková, Jana (advisor) ; Panská, Šárka (referee)
TITLE: The Analysis of Choreographies in Sports Aerobics AUTHOR: Klára Handrejchová DEPARTMENT: Faculty of Physical Education and Sport SUPERVISOR: PaedDr. Jana Hájková ABSTRACT: The main aim of the bachelor's thesis is to compare the variability and difficulty of elements in sports aerobics in 2022. In addition, the analysis focuses on the comparison of the choreographies of the finalists in the first and second levels of individual women category sports aerobics of juniors and adults in terms of technical index level and variety of difficulty elements. The working methods used are the observation of video recordings and the analysis of pre-selected choreographies. Furthermore, the analysis of the performance is carried out on the basis of predetermined evaluation criteria. Last but not least, at the end of the dissertation, research questions that demonstrate the differences in technical preparation between the first level in the junior and adult category and the second level in the junior and adult category are examined. KEYWORDS: Sports aerobics, Czech Aerobics Association, difficulty, variability, technical index
|
|
|
7th national Sokol's physical exercise festival 1920
Látal, Jaromír ; Kašpar, Ladislav (advisor) ; Hájková, Jana (referee)
Bibliographical identification Author's first name and surname: Jaromír Látal Title of the thesis: 7 th National Sokoľs Physical Exercise Festival 1920 Department: Charles University in Prague, Faculty of Education Supervisor: PhDr. PaedDr. Ladislav Kašpar, Ph.D. The year of presentation: 2012 Abstract: The topic of my (this) bachelor's thesis is a description and analysis of the 7 th Nationale Sokoľs Physical Exercise Festival 1920. Keywords: Sokol, union, region, Sokol festival, Prag, parade, exercises I agree the thesis paper to be lent within the library service.
|
|
|
Methods for solving the tolerance chains
Fiala, Lukáš ; Mazal, Pavel (referee) ; Svoboda, Petr (advisor)
This bachelor’s thesis deals with methods of solving dimensional chains. At the beginning, basic terms related to dimensional chains are explained. The next section describes worst case, statistical, group interchangeability and compensation methods. For better explanation, an example is solved for each method. Attention is also paid to systems in which the calculation of tolerance analysis can be performed. In conclusion, statistical and compensatory methods are used at the same assembly for comparison, and then, results are compared and evaluated. The thesis should provide the reader, in which cases it is appropriate to use a certain method.
|
|
| |
|
|
Elements of dance techniques in floor exercise in women artistic gymnastics
Tůmová, Marie ; Fričová, Marie (advisor) ; Novotná, Viléma (referee)
Title: Elements of dance techniques in floor exercise in women artistic gymnastics Objective: The main objective of this master thesis is an analysis of elements of dance techniques in women finalists of floor exercise in all four Olympics games from 2004 to 2016. Methods: In this master thesis content analysis and observation has been used. These methods were used to collect and evaluate necessary data. Results: The results bring an overview of individual approach of floor exercise finalists of each olympic games from 2004 to 2016 to dance elements depending on selected criteria. Futhermore they also compare the overall use of dance elements in particular olympic games with others and indicate the effect of the time interval between games on the frequency of presence of dance elements in the reports. Based on the results it is possible to predict the use of dance elements in floor exersice in the future. Keywords: dance, report, classical dance, contemporary dance, jazz dance, folk dance
|
guest ::
