|
|
Roof structure of construction for social purposes
Bašista, Ján ; Melcher, Jindřich (referee) ; Karmazínová, Marcela (advisor)
The work treats the static recalculation of an existing roof structure of a construction for social purposes and proposes two variants of the design of a new roof structure. The construction has a rectangular ground plan of 30 m x 47 m and the roof structure is placed on the load bearing circumference concrete walls. Except for the load constituted by the function of the construction and by the climatic area, an extra load of 2 tons suspended at any place of the structure is considered because of the special requirement of working and technological equipment. The variant no. 1 is designed from the steel S355. The variant no. 2 is designed as a combination of the wood GL24h and the aluminium EN-AW 5083. Both of the variants have 11 transverse load bearing girders. The purlins are perpendicular to the girders and are placed on them. Stiffness is secured by roof stiffeners.
|
|
|
Plastic materials and their treatment
Kopečný, Aleš ; Zemčík, Oskar (referee) ; Osička, Karel (advisor)
This research the basic empirical knowledge about the processing of plastic materials. The following are analyzes of the nature of plastic materials and analysis of the use of these materials in the engineering industry. This paper deals with the technological methods of processing plastics. Specifically, it is done as a summary of information about the technologies needed for the production of molds for plastics. Key words
|
|
|
Worm chip conveyor
Bilíček, Milan ; Pokorný, Přemysl (referee) ; Malášek, Jiří (advisor)
The aim of this thesis is the design of screw conveyor for transporting chips. Together with the design this thesis also includes technical report with basic calculations. In the search section, other types of chip conveyors, including major manufacturers, are described. The content of this work is also the drawing of the designed conveyor.
|
|
|
Diagnostic and improvement of electrical contact
Hrdý, Branislav ; Kuchyňková, Hana (referee) ; Veselka, František (advisor)
The aim of bachelor thesis is create a summary overview of terminals, to obtain information about contruction, materials of the conductive parts of the terminals and its snap methods. The next goal was description of methods of conductors’ construction and snap methods of its con-ductors. All processed information is obtained from the technical literature and from practical knowledge acquired during the measurement and monitoring of analyzed terminals. The final goal was to create an animated 3D model of terminal as a sample of main process of terminals’ working principle. In conclusion of this work is comparison of terminals, and their properties, facts observed during measurement or testing.
|
|
|
Production of plough share screw
Hladík, Milan ; Jopek, Miroslav (referee) ; Forejt, Milan (advisor)
The bachelor's thesis presents a design of plow screw production technology used to attach the blade to the plow frame. The screw is made of structural steel 14,140, in a production series of 120,000 pcs / year. From the possible technologies, the technology of volume cold forming was chosen. From the literature sources of the issue of volume cold forming, the optimal procedure of screw production was proposed. With the help of design, technological and control calculations, a machine was designed and subsequently a production tool, for which drawing documentation was prepared. With the help of technical - economic evaluation, the costs of component production were compared using volume forming and machining.
|
|
|
Footbridge
Grussmann, Jan ; Straka, Bohumil (referee) ; Sýkora, Karel (advisor)
Master´s thesis deals with design and complex static assessment of timber roofed footbridge structural system. The calculation part is divided into three main chapters, that are dedicated to determine load impacts on structure, to particular structural and roof members assessment and also to design details of connections. The lower part of structure is formed by flat arched main beams of glued laminated timber, floor beams, stringers and under-deck bracing. The upper part of footbridge is formed by structure of gabled roof and additional bracings. Transversal frames of footbridge copy the shape of arch and they are arranged orthogonally to its axis. They form a radial fan with commom centre in the longitudinal direction. The static scheme of structure is thought as a statically undefinite system thanks to the bedrock surrounding the footbridge.
|
|
|
Calculation of heat and force field UniGear ZS1
Mokrý, Lukáš ; ABB, Drahomír Tůma, (referee) ; Dohnal, Petr (advisor)
The aim of my work is to describe high-voltage switchgear type UniGear 500R, which is part of UniGear switchgears family. I will focus on heating issue of one 500R unit and its parts during operation. Maximum values of this heating is limited by standards and can´t be exceed to ensure safe and reliable operation. That is why the heating tests are necessary part of designing and developing switchgears. Calculation will be made by two different ways. First is classic one-pole heating net method and second is numerical simulation in Solidworks flow simulation program. Except the theoretical description there will be presented also used 3D model and explanation of both method, used to calculation and simulation. Last point of this work is measuring of this type of switchgear and getting real data. The main point there is to compare measured values with values calculated and decide if is possible to simulate tests with appropriate accuracy. Then would be also possible to substitute the real test in laboratory, which costs many thousand crowns and takes lots hours of time. This work is collaborated with EJF division of ABB Company, where I am employed. Heating issues in this company is always on process, because of developing and improving of their products. So this work could be helpful in this field. ABB provides all materials needed, especially technical catalogues, 3D model and final values from laboratory measuring. Support from college faculty is mainly in study consultations and proposing of calculations making. In the end of work will be make final comparison and evaluation of achieved results.
|
|
|
Timber foot bridge over a wolf run
Mynaříková, Alice ; Šmak, Milan (referee) ; Straka, Bohumil (advisor)
The subject of this diploma thesis is the construction of a timber foot bridge over the wolf run in the Šumava National Park. The total length of the bridge is 240 m with two ground plan bends. The foot bridge includes three viewing decks, two of which are covered with shed roofs. The foot bridge is divided into 16 segments. Each segment is 15 m long with a width of 2.2 meters. The ground plan dimensions of the viewing decks are approximately 15x7 and 15x11 m. As the main structural material has been chosen glued laminated timber of the strength class GL28h, other elements are made of solid timber of the strength class C24. The thesis includes an introductory document, options analysis, technical report, static analysis, bill of material and drawings.
|
|
|
Description and Evaluation of Fastener Torque Characteristics of Screw Connection
Větrovec, Ondřej ; Roupec, Jakub (referee) ; Brandejs, Jan (advisor)
This bachelor’s thesis deals with the description and evaluation of the torque characteristics of screw connection in plastic parts in headlight. The evaluation was compared with the same screws from three different suppliers. Compered was the course of torque when screwing. The work also includes analysis of the current state of knowledge in the use of plastics in the automotive industry and joining plastic parts. There is more emphasis on shaping joining screws.
|
|
|
The screw conveyor for transport of grain
Pernica, Marek ; Jonák, Martin (referee) ; Řezníček, Milan (advisor)
This bachelor thesis deals with constructional solution and proposal of skew screw conveyor for transport of grain. In thesis is carried out calculation of main parts of screw conveyor, proposal of engine, proposal of enshrinement of screw, solidity review of screw shaft and solidity review of trough. Drawing documentation contains general device draw, subassemblies of all bearing lengths and welding subassembly of trough.
|
guest ::
