National Repository of Grey Literature 39 records found  1 - 10nextend  jump to record: Search took 0.01 seconds. 
Stabilization of image sequence without decrement of its resolution
Otruba, Vítězslav ; Říha, Kamil (referee) ; Číka, Petr (advisor)
The shake that affects the video camera during taking of the footage degrades the level of the viewer experience. This article contains the design of the method that stabilizes the stored footage and fills in the gaps in the separate frames, so the picture resolution remains the same after the process.
Quality of services and experience qualify for next generation networks
Vaněk, Jiří ; Horváth, Tomáš (referee) ; Grenar, David (advisor)
The thesis sums up the traffic parameters for the evaluation of next-generation access networks. There are mentioned parameters for service quality management and parameters for measuring the quality of experience. The EU regulation on High Speed Internet in the Czech Republic is analyzed. The practical part compares the results between the implementation of the quality management of services and without implementation. Also there is comparing theoretical and practical transmission rates of physical ports. Part of the thesis is a questionnaire focused on the quality of experience of the video sequence.
The analysis of limits for multimode fibre imaging
Štolzová, Hana ; Kozubek, Michal (referee) ; Dostál, Zbyněk (advisor)
Multimódová vlákna jsou zobrazovacím prostředkem s významným potenciálem v in-vivo mikroendoskopii. V poslední době tato metoda zaznamenala velký rozvoj, a to díky zdokonalování výpočetní a jiné techniky, například prostorové modulace světla. Cílem této práce bylo nalézt specifické limity zobrazování multimódovými vlákny a představit jejich počítačovou simulaci. Byl zkoumán vliv způsobu osvětlení optického systému obsahujícího multimódové vlákno na jeho schopnost fokusace a zobrazování. Analýzou dat získaných ze simulací a experimentu bylo zjištěno, že různá míra omezení Gaussovského svazku a plnění apertury multimódového vlákna má za následek významnou změnu zobrazovacích schopností systému. Při pozorování kvality fokusace bylo zjištěno, že nejlépe se projevují svazky málo omezené aperturou vlákna. Tento fakt byl potvrzen i experimentálním měřením. Zobrazování za použití svazků s podobnými hodnotami omezení (50%) projevovalo i nejlepší schopnost přenosu kontrastu. Avšak při analýze rozlišení dvou bodových objektů se jako nejvhodnější projevily svazky významně přeplňující numerickou aperturu vlákna, 100% a více. Přítomnost tohoto rozdílu poukazuje na skutečnost, že multimódové vlákno není zcela náhodné médium, ale propagace světla skrz multimódové vlákno projevuje znaky závislosti na vnějších zobrazovacích podmínkách, jako je například změna omezení osvětlovacího svazku. V této práci bylo představeno několik způsobů vyhodnocení kvality zobrazování pomocí multimódového vlákna. Každé z těchto kritérií podalo dílčí charakteristiku chování optického systému obsahujícího multimódové optické vlákno. Jednotlivé výsledky se neshodují na jednom konkrétním řešení a nutí osobu využívající zobrazovací systém obsahující multimódové vlákno ke zvážení několika aspektů, a to v jakém prostředí bude daný optický systém využívat a který parametr kvality zobrazení bude považovat za nejdůležitější.
User Interface Using WWW for Photo Image Analysis
Balcárek, Lukáš ; Láník, Aleš (referee) ; Zemčík, Pavel (advisor)
This master's thesis deals with the user interface for machine quality assessment of the technical groups of photos. This work is written about photos, graphics editors and their evaluation. The practical part is focused on the design and creation of application with web user interface, which evaluates and compares the quality of photos. Finally is this created application with its user interface tested by users, its benefits and opportunities for further expansion are evaluated.
Switches for FTTx - deployment in networks with IPTV
Horváth, Tomáš ; Reichert, Pavel (referee) ; Münster, Petr (advisor)
The aim of this paper was to acknowledge ourselves with the switches which can be used in the networks based on FTTx. The first chapter deals with the IPTV service, its advantages, disadvantages and provided services. In the following chapter, optical fibres and the possibilities of their termination are discussed - FTTH, FTTC, FTTB, FTTO, FTTP and FTTN. The next part involves the methods of broadcasting and more detailed analysis of multicast addresses including defined range and multicast distributional trees. The conclusion of the theoretical analysis of this paper is formed by the explanation of all 3 versions of the IGMP record and the division of switchers through the signals transmitted. In the practical part, the suggestion of testing these switchers is carried out. The first method represents testing through one video file in various resolutions. Another possibility of testing is based on the first method, nevertheless, with the difference that the testing is done in two streams and each one of them has a different data flow. The purpose of the last testing is to demonstrate the fact that the video flow is transmitted through multicast, not every single flow from a server to a client separately. The connection between switchers was reduced to 10 Mb/s and the chosen video file runs at these average transmission data.
Methods of Increasing the Dynamic Dange of Image
Sailer, Zbyněk ; Juránek, Roman (referee) ; Koutný, Jiří (advisor)
This thesis deals with dynamic range of digital cameras sensors problem and methods for solving this problem. There are described the existing methods of high dynamic range image creation, the techniques of obtaining the input data and a new method of creation of HDR image - so-called direct generation.
Nonlinearity in the course of acqusition date in optical coherence tomography
Kadla, Jan ; Kolář, Radim (referee) ; Kuna, Zdeněk (advisor)
This bachelor thesis builds on my semestral work, thus provides a description of the problem of optical coherence tomography imaging system in terms of a brief historical development, structural parts and modifications. Previous work is supplemented by a more detailed description of data acquisition and especially signal processing. I present examples of the clinical and research application of this technology, and try to objectively refer to its advantages and disadvantages. Chapter dedicated to the description of a practical measurement explains selected data collection procedure and clarifies their following processing. At the end of the work are summarized the results achieved, including the considerations of potential errors during the measurement.
Construction of Equatorial Fork Mount
Tůma, Jiří ; Matějka, Petr (referee) ; Pavlík, Jan (advisor)
This master's thesis deals with design of equatorial fork mount for astronomical telescope. The issue of space object watching equipment is deeply analysed. The enclosures of analysis are used in design project. Important aspects are accuracy of motion and high resolution of mount. These parameters are compared with series manufactured equatorial mounts.
VGA image generation with microcontroller
Polášek, Jan ; Šebesta, Jiří (referee) ; Fedra, Zbyněk (advisor)
This bachelor’s thesis is concerned with generating image in VGA format using microcontroller. It’s aimed at microcontrollers series AVR from producer Atmel. Project contains VGA interface description, solves its connection to microcontroller’s output ports, further it contains connection diagram of image generation device with microcontroller Atmel ATmega324P, that I constructed during work on this project.. In project are analyzed fundamentals of image generating in microcontroller, synchronization of image using microcontroller’s internal counter, creating of simple graphic images and text and principles of generating colour images. Generation of text is analyzed in details, including source code for microcontroller. The result of this bachelor‘s thesis is functional image generator device.
Image Interpolation
Václavík, Jan ; Odstrčilík, Jan (referee) ; Kolář, Radim (advisor)
This bachelor’s thesis deals with the comparison of different interpolation methods. And their use on different grey scaled 2D images. The main part is dealing with linear, quadratic and cubic method and their qualitative evaluation for multiple resizing of image resolution. The analysis is resolved in computing system Matlab.

National Repository of Grey Literature : 39 records found   1 - 10nextend  jump to record:
Interested in being notified about new results for this query?
Subscribe to the RSS feed.