|
|
Condensing technology and flue gas
Müller, Jan ; Topič, Jan (referee) ; Počinková, Marcela (advisor)
This thesis is developed as a proposal for heating for a primary school and kindergarten in the region of Brno-countryside. For the insulated building, a combination of heating and air-conditioning is proposed. The concept is designed so that the air-conditioning preheats the exterior air and the heating system warms the incoming air to a comfortable temperature. For the required thermal performance, sources of heat (for gas and pellets) and a layout solution for the boiler room is designed. Drainage of combustion products is proposed for both solutions. The project solution is per the extent of the construction permit. The theoretical part is linked with the practical part through the condensation boilers, their function and division, and drainage of combustion products. The experiment for the given topic was conducted on the drainage of combustion products. The pressure loss of the reverse knob was determined in relation to the flow rate of air in the condensation boilers as this loss is essential in assessing the drainage of combustion products.
|
|
|
Grate Biomass Boiler - 88 t/h; 9.6 MPa; 520 °C
Střecha, Josef ; Hudeček, Mirko (referee) ; Lisý, Martin (advisor)
This master's thesis deals with the design of stoker-fired boiler for combustion of biomass. The main points of work are stoichiometry calculation of combustion, determining the dew point of flue gas, calculation of losses, which ones serves for determination of boiler efficiency, dimension design and detail calculation of thermosetting surfaces. In the last chapter is numbered total balance and real thermal efficiency of boiler.
|
|
|
Wet surfaces drying using air streams
Gusnarová, Hana ; Hejčík, Jiří (referee) ; Hejčík, Jiří (referee) ; Jaroš, Michal (advisor)
Diploma thesis submit processing and evaluation of experiment which was made at University of Hertfordshire. Aim of this experiment was practically confirm and compare efficiency of drying bottles with blower and compressor. The next purpose was to suggest solution against recondensation on dry surface of bottles. Diploma thesis involves also economy calculation. In the diploma thesis was described issues of drying and condensation, realized analysis of drying equipment and methods of air conditioning. As the most suitable and the most cost effective way of drying was at the base on experiment and energy and economy calculation chosen tested turbo blower 587. As the solution, against recondenzation was created anticondensation tunnel. As the most suitable way for condition the dew point inside the tunnel for require value was chosen desiccant rotor Munters.
|
|
|
Insulation influence on heat consumption
Gregor, Jiří ; Bokišová, Lenka (referee) ; Hejčík, Jiří (advisor)
The aim of this bachelor thesis is to analyzethe energy budget of a house before and after heat cladding and to assess whether the heat cladding is perspective, if the invested money returns and to show the main advantages and disadvantages of cladding. Measured values from 1992 to 2012 are used in this thesis. Heat cladding in our house was done at the turn of 2003-2004 and in the same yearsthe old wood windows were replaced with new plastic ones.
|
|
|
Hygrothermal processes in walls of wooden houses
Vencel, Lukáš ; Vlach, František (referee) ; Bečkovský, David (advisor)
This diploma thesis solves the problems of hydrothermal processes in walls of wooden houses and associated issues. A chosen were two apartment buildings, where they underwent exmerimental measurement of indor air, in order to determine the boundary conditions commonly boundary building evelope. Was followed by hygrothermal analysis of four commonly used constructions of wooden buildings in the Czech Republic, using various numerical methods. The quantity of information obtained from various numerical methods were analyzed individually. The final part of the thesis is devoted to experimental measurements of diffusion properties of materials. Namely foil vapor barrier, in terms of its influence on the perforation vapor diffusion resistance factor. Information obtained from the experiments were applied to re numerical analysis for walls with a foil vapor barrier. Followed by comparing both cases, in terms of changes hygrothermal behavior of structures with influence of perforation of the vapor barrier.
|
|
|
Design of the condensation separator unit for water injection system for spark ignition engine
Burjeta, Michal ; Beran, Martin (referee) ; Bazala, Jiří (advisor)
Tato práce je zaměřena na systém vodního vstřikování a způsoby zajištění dostatečného množství potřebné kapaliny pro správný chod tohoto systému. Jedním zajímavým a nezávislým řešením je využití odpadních produktů motoru, a to vodní páry produkované spalováním paliva. Pro zajištění kondenzace je nutné zchlazení výfukových plynů pod rosný bod páry, což lze zajistit opatřením výfukového potrubí chladiči. Vzniklý kondenzát je pak potřeba efektivně oddělit od proudu plynů a zachytit. Návrh takovéhoto systému vychází z reálně naměřených dat a jeho následným ověřením pomocí CFD simulace.
|
|
|
Moisture sensor
Čermák, Jan ; Klusáček, Stanislav (referee) ; Beneš, Petr (advisor)
This bachelor work consider with question of measurement of air humidity. Here are the basic theorem, wich have relation to air humidity, and detailed description of methods, wich are used in air humidity sensors. After come note about qestion of measurement humidity in soild substance. Next theme is calibration of sensors. In the last part is describle the structure of electrical network with unificated readout., wich is dependent on surrounding relative air humidity. Obiter work contain practical measurement of humidity in industry and qestions about it.
|
|
|
Design of the condensation separator unit for water injection system for spark ignition engine
Burjeta, Michal ; Beran, Martin (referee) ; Bazala, Jiří (advisor)
Tato práce je zaměřena na systém vodního vstřikování a způsoby zajištění dostatečného množství potřebné kapaliny pro správný chod tohoto systému. Jedním zajímavým a nezávislým řešením je využití odpadních produktů motoru, a to vodní páry produkované spalováním paliva. Pro zajištění kondenzace je nutné zchlazení výfukových plynů pod rosný bod páry, což lze zajistit opatřením výfukového potrubí chladiči. Vzniklý kondenzát je pak potřeba efektivně oddělit od proudu plynů a zachytit. Návrh takovéhoto systému vychází z reálně naměřených dat a jeho následným ověřením pomocí CFD simulace.
|
|
|
Grate Biomass Boiler - 88 t/h; 9.6 MPa; 520 °C
Střecha, Josef ; Hudeček, Mirko (referee) ; Lisý, Martin (advisor)
This master's thesis deals with the design of stoker-fired boiler for combustion of biomass. The main points of work are stoichiometry calculation of combustion, determining the dew point of flue gas, calculation of losses, which ones serves for determination of boiler efficiency, dimension design and detail calculation of thermosetting surfaces. In the last chapter is numbered total balance and real thermal efficiency of boiler.
|
|
|
Hygrothermal processes in walls of wooden houses
Vencel, Lukáš ; Vlach, František (referee) ; Bečkovský, David (advisor)
This diploma thesis solves the problems of hydrothermal processes in walls of wooden houses and associated issues. A chosen were two apartment buildings, where they underwent exmerimental measurement of indor air, in order to determine the boundary conditions commonly boundary building evelope. Was followed by hygrothermal analysis of four commonly used constructions of wooden buildings in the Czech Republic, using various numerical methods. The quantity of information obtained from various numerical methods were analyzed individually. The final part of the thesis is devoted to experimental measurements of diffusion properties of materials. Namely foil vapor barrier, in terms of its influence on the perforation vapor diffusion resistance factor. Information obtained from the experiments were applied to re numerical analysis for walls with a foil vapor barrier. Followed by comparing both cases, in terms of changes hygrothermal behavior of structures with influence of perforation of the vapor barrier.
|
guest ::
