|
| |
|
|
Implementation of PSD controller into microcontroler MCF52233
Lang, Stanislav ; Holek, Radovan (referee) ; Macho, Tomáš (advisor)
The goal of my bachelor thesis is the project and realization of a digital regulator, including the possibility of user’s settings. The first two chapters, which present a theory and a survey of the problem of digital regulation, offer an introduction as far as the used hardware (32-bit microcontroller M52233 from the company Freescale) is concerned. The main part of my thesis deals with the description of concrete implementation of regulation algorithms into the selected hardware as well as the communication with the regulation unit and the selection and basic configuration of the peripheral used.
|
|
|
Intake Control Mechanism of Compressor Housing
Bartoníček, Richard ; Doman, Jozef (referee) ; Novotný, Pavel (advisor)
The thesis pursues a design of mechanism for controlling the amount of air sucked by a turbocharger compressor. In the first part, there is a brief description of a turbocharger and its characteristics, in the second part the usual regulation methodologies are presented. Third, the main part describes the creation of the mechanism from concept drafts and their comparison, through the kinematic and force analysis of control parts, to the complete packaging a connection to the compressor housing. The fourth part is dedicated to the mechanism analysis in the terms of ability to perform as required.
|
|
|
Complex lighting system
Šipr, Jan ; Hadinec, Michal (referee) ; Friedl, Martin (advisor)
This paper deals with the theoretical basic principles of lighting and regulation. On the basis of theoretical knowledge, there was task to design a lighting system tailored to your needs. Additionally, there is a communication protocols used in lighting technology DMX and ArtNet.
|
|
|
Management of Heating Energy at Home
Dohnal, Stanislav ; Grepl, Jan (referee) ; Kříž, Jiří (advisor)
The aim is to adapt the old heating system so that the new system will meet the needs of users and facilitate control of system. The new heating system can independently control heating automatically. Its important part is remote access to system control. The user always has up-to-date information and can adjust the heating to suit his needs.
|
|
|
Heating of flat house
Hánl, Jiří ; Počinková, Marcela (referee) ; Topič, Jan (advisor)
The theme of my bachelor´s thesis is heating proposal and hot water preparation in apartment house. The teoretical part is focud on applicability and constructional solution of fittings. The calculating part consists of heat source proposal, hot water preparation, distribution of heating water and heating elements design. In the building there are proposed two heat sources, the first one for heating water and the second one for hot water preparation. The heating elemets are panel, tubular and floor convectors. The project part consists of technical report and drawing doocumentation.
|
|
|
Change of voltage at LV terminals of a MV/LV power distribution transformer caused by changes in its load
Jandora, Jiří ; Bátora, Branislav (referee) ; Blažek, Vladimír (advisor)
The thesis deals with the use of distribution transformers, their integration into the electrical network, their properties, and principles and means of regulation according to changes in load. The introductory chapter is devoted mainly to the theoretical background concerning the functioning of the transformers. Even though it is not the focus of this thesis, a brief summary of their structure will be provided because it is presumed that not all the readers are familiar with this particular electrical network block and thus they should be explained how the transformer works. Then the ways of transformer regulation will be outlined. In the theoretical part, the important point for the reader is the substitution of the transformer by two-port network i.e. the equivalent circuit. The two-port network is a substitution of the connection properties by simple electric elements, which are not so problematic for further use. When dealing with the two-port networks in the chosen equivalent circuit, Blondel’s constants will be used. Blondel’s constants facilitate working with the basic network invariables of the circuit such as amperage, voltage and power. The second part of the thesis is devoted to solving a problem that involves the use of distribution transformers. The problem is as follows: there is a manufacturing plant with three transformers, each of them having rated power and nominal transformation ratio. The manufacturing plant is supplied by HV three-phase line with rated voltage and parameters given by the distribution point, where constant voltage is maintained. The task is to determine in what ways the voltage of the low voltage terminals of the transformers will change when changing the power from idling circuit to the rated load. The power factor should be constant. The method for solving this task has already been outlined in the theoretical part. The results are summed up in a simple chart completed with diagrams, which concisely describe the result of the research.
|
|
|
PH controller for aquarium
Dvořák, Jan ; Fedra, Zbyněk (referee) ; Šebesta, Jiří (advisor)
This bachelor’s thesis deals with the system which is designed as a pH regulator for aquarium water. The first and second chapter are aims to the basic requirements and possibilities on controlling of the potential of hydrogen in water. Main methods of the pH measuring, its controlling and regulation are included. The third chapter presents a design of the pH regulator system. The practical and software solution of this project is presented in the fourth and fifth chapter. There are described in detail the main blocks of the pH regulator - amplifier, galvanic isolator and output power stage. The results of the testing and measuring of the designed subsystems are introduced in the last part of the work.
|
|
|
Control of linear drive HIWIN by NI SoftMotion
Sabó, Marek ; Šubrt, Kamil (referee) ; Houška, Pavel (advisor)
This thesis deals with the control of HIWIN three-phase linear synchronous motor using NI SoftMotion and frequency inverter D1-N on the NI Compact RIO platform. In the introductory section is discussed the classification of linear motors, the principle of functionality of linear synchronous motors, described the fieldbus EtherCAT and the NI SoftMotion module. Further work is dedicated to the hardware used, its parameter, configuration and the regulation of drive control. The final part focuses on the design and implementation of axis control and movement accuracy verification.
|
|
|
Pressure losses in heating systems
Švanda, Martin ; Horká, Lucie (referee) ; Počinková, Marcela (advisor)
This diploma thesis deals with pressure losses in heating systems. The diploma thesis is divided into three sections. The first part is theoretical and deals with the occurrence of pressure losses. It discusses the properties of the fluid that affect pressure losses. It also deals with hydrodynamic phenomena, flow distribution, pressure loss distribution and its calculations. The aim of the second part, which is practical, was to create a heating project for a selected object. The object is a two-floor kindergarten building located in Velké Němčice. For this project, two heating variants were created. For the first variant, radiators and heating benches were designed and for the second variant, underfloor heating was installed in the building. The goal was to use a source which will gain heat mainly from renewable sources, so the air / water heat pump was chosen as the source of heat production. The project ends with a technical report. The third part of the thesis is dedicated to an experiment which purpose was to find out how the pressure losses of the connecting pieces are reacting to the change with the change of the heating water conditions (flow, temperature). Alongside, two pipes were created which differed in the type of connecting pieces so it allowed to compare how their pressure losses differ. Both pipes were connected by radial pressing, but the fittings differed in the quality of the brass, and therefore in the construction. Also, part of the experimental section of the diploma thesis is a description of the course of radial pressing of fittings from the Herz company.
|
guest ::
