|
| |
|
|
Airport terminal
Mika, Václav ; Pešek, Ondřej (referee) ; Horáček, Martin (advisor)
The diploma thesis deals with design and structural assesment of the steel airport terminal in Prag-Ruzyne. The project is designed in two options. The dimensions of the rectagular floor plan are 79,3 x 98,65 m. The height of the building in highest point is 21,5 m. The airport terminal contains 9 main frames spaced by 9 m. The cladding of the roof and the side walls is designed by sendwich panels. The face wall is made by glass facade system.
|
|
|
Home health services - Bobrová, technological stage of roofing
Malý, Martin ; Hanzelková, Martina (referee) ; Šlanhof, Jiří (advisor)
The bachelor thesis deals with structural and technological solution to roofing of the house health services in Bobrové, in the Highlands. Addresses the implementation of a truss structure of a gable roof and a subsequent cladding. The main content of the work formed the technical report, the construction situation, the budget with the statement of assessment, technological regulation, construction site equipment, timetable, design of mechanical assembly, inspection and test plan and work safety.
|
|
|
Steel load-carrying structure of production hall with bridge crane
Štulrajterová, Terézia ; Melcher, Jindřich (referee) ; Karmazínová, Marcela (advisor)
This bachelor thesis deals with the design and assessment of a steel load-bearing structure of a two-aisle production hall. That hall has a rectangular ground plan of a width 32 m (20 + 12 m) and lenght 54,54 m (9 modules distanced 6 m from each other). The main aisle is 10 m high and inside is located a overhead crane with carrying capacity 5 t. The second aisle is used as a storage area for materials that have already been produced. The skeleton of production hall is made of a ten transversal bindings. Lattice trusses are hinged mounted on constraint pillars of solid poles. The hall is situated in the north of the Czech Republic in the city of Děčín.
|
|
|
The roof structure of the industrial hall in Kyjov
Nosková, Nela ; Pilgr, Milan (referee) ; Šmak, Milan (advisor)
The Bachelor´s thesis describes design and static assessment of the main roof structure supporting elements of the roof structure of the industrial hall in Kyjov. The hall is designed from timber. The aisle is rectangular floor plan 17,0 x 40,0 m. The main bearing structure causes as a frame truss supported by columns. Solid frame is made from solid timber C24. Purlin is designed from solid timber C24. The static calculation also includes fire resistance reports of single elements. Static analysis has been accomplished by student version of the SCIA Engineer 2012 software.
|
|
|
Sports hall
Návarová, Michaela ; Doc.Ing. Bohumil Straka,CSc. (referee) ; Sýkora, Karel (advisor)
The thesis proposal is developed wooden structure sports hall. The hall is designed for general sports (handball, football, tennis, volleyball, basketball). Plan dimensions of the hall are 26,5 m x 45 m and variable height.The structure is designed for the České Budějovice. Carrier enclosure is designed from the glued laminated wood with axial distance of 3 m Purlins are designed as simple beams with axial distance of 2,5 m and PUR sheathing panels are used. Articulated connection is made with steel pivotal connections.
|
|
| |
|
|
Industrial building
Nitková, Jana ; Buchta, Stanislav (referee) ; Sýkora, Karel (advisor)
The bachelor thesis contains design of steel one-aisle industrial building with span 24 m, lenght 63 m and height of the holder of a crane track girder 8,7m. There are two overhead cranes with load capacity 12,5 tons and 32/8 tons in industrial building. The structural material hall is made of steel S 235. The drawings includes transverse and longitudinal section, platform and manufacturing drawing of continuous truss.
|
|
|
The Steel Structure of Car Showroom
Buchta, Vojtěch ; Buchta, Stanislav (referee) ; Hron, Lukáš (advisor)
The task of the thesis was to design a draft and a review of car’s showroom supporting structure. The object is located in the city of Hradec Králové. Floor plan has a size of 30 x 15 m, the height of the object is 7 m at the highest point. The mono-pitched roof is formed by two parts on the same slope 3.81 °. Material of all components is steel S235. All calculations were performed in accordance with valid standards. The structure consists of a load-bearing columns fixed to the ground, the truss girders are designed of hollow cross-sections, pin-suported by the columns. The purlins are pin supported by upper chords of a truss girder, with the lower and upper edges flushing. Purlins support the roof made of roof-panels by Kingspan, thickness 160 mm. Wall casing the technical parts of the object is formed also by system panels by Kingspan. The cladding of the sales area is made of glass panels by Reynaers.
|
|
|
The steel construction of an exhibition pavilion
Petrovičová, Lucia ; Hron, Lukáš (referee) ; Štrba, Michal (advisor)
The content of this bachelors thesis is design and appraisal of the steel construction of an exhibition pavilion. Ground plan dimensions are 39,2 x 50,0 m with approximate height 10,7m. The supporting system of the structure consists of planar transverse linkages which are created by lattice truss.The design is selected from two pre-solved geometrical and structural variants which are compered on the basis of the weight of structure and ultimate and serviceability limit state. From the selected variant is made detailed static assessment and drawing documentation.
|
guest ::
