|
| |
|
|
Apartment House
Pokluda, Jiří ; Havířová, Zdeňka (referee) ; Lavický, Miloš (advisor)
The aim of this bachelor's thesis is the elaboration of project documentation for the construction of a new apartment building in the southwestern part of the village Holubice. The building is designed as a detached building with four above-ground and one underground floor partly below ground level. In the apartment building with a single-layered flat roof, there are 8 residential units, technical facilities and house equipment. There is also a designed elevator in the building. The drawing part is processed using the AutoCad program, the visualization is processed in the ArchiCad and Lumion program.
|
|
|
Apartment building
Lukešová, Michaela ; Nespěšný, Ondřej (referee) ; Pěnčík, Jan (advisor)
The subject of the bachelor's thesis is the elaboration of a part of the project documentation for the construction of an apartment building. The apartment building is located in the cadastral area of Opočno pod Orlickými horami. The building has four floors and a partial basement. In the basement of the building are designed cellars, utility room, elevator engine room and air conditioning. On the ground floor there is a cleaning room, a bike shed / carriage house and two residential units. The second and third floors are identical in layout and there are two residential units, on the fourth floor there is a residential unit with a terrace and a common room with kitchen and toilet. A total of seven residential units are designed in the building. Vertical load-bearing and non-bearing structures are made of ground brick blocks, in the basement there are perimeter structures made of monolithic reinforced concrete. Horizontal load-bearing structures are monolithic reinforced concrete, reinforced according to static calculation. The insulation of the building is solved by the contact insulation system ETICS.
|
|
|
Apartment house
Kuťáková, Barbara ; Svoboda, David (referee) ; Čuprová, Danuše (advisor)
The bachelor´s thesis deals with the design of a 4 flours and partially basement new apartement house in city od Pardubice. The subject of the bachelor's thesis is the elaboration of a part of the project documentation for the construction realization. In the basement there is a cellars and bike shed. On the first floor there is a vestibule, carriage room, technical room, cleaning room, stock and 3 dwelling units. The second and third floors are identical in layout and there is 4 dweling units in both od the floors. The fourth contains 2 dwling units with private terraces. The vertical load-bearing structure system is designed of hollow clay blocks. The vertical load-bearing structure systém in the basement is designed of reinforced concrete. Horizontal load-bearing structures are designed as prestressed prefabricated panels. Stairs are designed as cast-in-place reinforced concrete. The roof structure is designed as a warm flat roof. Certified contact thermal insulation system is designed.
|
|
|
Apartment building B1
Jandzík, Michal ; Šoulová, Eva (referee) ; Vlček, Milan (advisor)
Based on the assignment, the bachelor's thesis deals with the design of an apartment building in the village of Rosice, in the cadastral area of Rosice near Brno, near the catchment and regional city of Brno. Locally interesting environment with potential for the future for the development of the wider surroundings of the city of Brno and the development of the village of Rosice itself. According to the zoning plan of the municipality, the considered area meets all requirements for housing development. The building is designed as a free-standing, with one underground floor and two above-ground floors and an attic. The underground floor contains the technical background of the building, a garage for each apartment, as well as a cellar and communication areas. The upper floors contain residential units. Number of apartments 6, of which one barrier-free. Wall construction system made of ceramic precision blocks, ceiling construction made of ceramic ceiling beams and ceramic inserts, monolithic reinforced concrete staircase, saddle roof with heavy concrete roofing. The work contains the implementation documentation of the construction.
|
|
|
Flat House
Jakubčík, Lukáš ; Novotný, Miloslav (referee) ; Novotný, Miloslav (advisor)
This bachelor´s thesis deals with the design of detached apartment building in Mikulov. The apartment building is set into the sloping terrain of the town of Mikulov and consists of one basement and four above-ground floors. From the first to third above-ground floors two residential units with balconies are designed, on the top fourth floor is one spacious residential unit with access to the outdoor terrace. The floors are serviced by a staircase supplemented by an elevator in a separate elevator shaft. The building uses a structural system of ceramic parts for vertical and horizontal structures, part of the foundation structure is made of lost formwork. The roof of the building is warm flat roof. The bachelor´s thesis contains project documentation for the construction.
|
|
|
Marketing project proposal
John, Dominik ; Vajda, Radim (referee) ; Juřica, Pavel (advisor)
This bachelor thesis discusses the usage of project management methods during the planning and execution of a marketing event project. Theoretical knowledge and methods are being used to create a proposal of a functional project documentation. It also describes the advantages this approach yields.
|
|
|
Design of reconstruction of LV electrical installation in HV substation
Vašulín, Jakub ; Mastný, Petr (referee) ; Janík, Daniel (advisor)
The topic of this work covers a theoretical description of project design for reconstruction of high voltage distribution system point. The aim of the work is to prepare material on the level of detail design documentation which covers not only design itself but also a theoretical description of external influences, a discussion of TECOMA Foxtrot system facilities and a characterization of standard specifications for individual types of rooms. Aquired knowledge was used detail project documentation which is an integral part of this work.
|
|
|
Electrical installation for a family house with automation elements
Souček, Tomáš ; Janík, Daniel (referee) ; Mastný, Petr (advisor)
The aim of this work is to familiarize with the implementation of power and data distribution and systems for automation of electrical installation. Furthermore, to define the principles necessary for the creation of the project documentation of the electrical installation of a family house. The first part of the thesis deals with the definitions and principles associated with safety and the methods of ensuring it, which must be taken into account when creating project documentation. This theses also deals with the conditions and selected methods of connection of the building to the low-voltage distribution network, methods of execution of high-current and low-current installation and systematic installation . The second part deals with the elaboration of a specific electrical installation project for a family house. The content of this point of the assignment is the design of the installation of the high and low-current circuits of the family house, including the systematic installation. It also includes the design of the electric switchboard, lightning protection system and the preparation of technical documentation in accordance with the applicable technical standards.
|
|
|
Detail design documentation for the electrical installation Loxone of a passive house with PV system
Bolf, Marek ; Topolánek, David (referee) ; Bátora, Branislav (advisor)
The thesis deals with the design of high-current and low-current electrical wiring in a house, with emphasis on their connection to the intelligent control system Loxone. The thesis describes the house, the principle of designing lightning protection, the way of cabling, the options to control individual technologies by the Loxone system and the description of proprietary Loxone protocols and protocols through which Loxone system can communicate with other devices. In the practical part was prepared drawing documentation for the lightning conductor, cable routes, detailed connection of Loxone buses and components and high-current and low-current switchboard. Furthermore, the technical report and the budget of the electrical installation were prepared.
|
guest ::
