|
|
Embedded System for Home Brewery Control
Mimochodek, Vojtěch ; Jaroš, Jiří (referee) ; Šimek, Václav (advisor)
This thesis is focused on automatic measurement of beer density during fermentation. The main objective is to create an electronic densitometer with a web user interface. The thesis consists of a theoretical part, which deals with the history of beer, beer production processes and equipment. The practical part includes system design and implementation. In conclusion, there are documented the results of testing the densitometer, which was the subject of the bachelor's thesis.
|
|
|
Welding of pressure vessels
Máca, Martin ; Dohnal, Ivo (referee) ; Daněk, Ladislav (advisor)
The work is focused on the technology of welding pressure vessels. The chosen pressure vessel was one for beer fermentation (also known as CK tank). In addition there are methods of weld inspection and legislative rules for pressure vessels, also mentioned in this work.
|
|
|
Effect of the dry hopping of the stability of beer foam
Benda, David ; Štursa, Václav (referee) ; Pořízka, Jaromír (advisor)
This diploma thesis deals with the influence of dry hopping on the stability of the beer foam. It was observed how this effect affected general characteristics of beer, the content of hop bitter acids, proteins, phenolic compounds, selected micro- and macro elements, organic acids and the stability od the beer foam. Theoretical part characterises raw the materials for beer production, the substances affecting the stability of beer foam and the beer brewing process. Furthermore the beer foam is described froam a physical point of view together with the steps of its formation and drainage as well as other phenomena that lead to its disappearance. A detailed description of used analytical methods is included. The experimental part illustrates the preparation of the model beer and the implementation of dry hopping with the Czech hop variety called Kazbek. Dry hopping was carried out on day 3, day 5 and day 10 with a 3 g/l and a 6 g/l hop dose. The prepared beer was subsequently analysed for general characteristics, the beer foam stability, bitter hop acids, phenolic compounds, protein, selected micro- and macroelements and organic acids. Based on the measured data, there were found correlations between the observed beer parameter and the stablity of the beer foam. The results revealed that dry hopping in beer increases the content of the phenolic compounds and bitter substances, but its effect on the beer foam stability is negative.
|
|
|
Bioflavouring of beer using new Czech hop varieties
Ondruch, Petr ; Diviš, Pavel (referee) ; Pořízka, Jaromír (advisor)
This diploma thesis focuses on bioflavouring of beer using new czech hop varieties. Dry hopping is a phenomem, that contributes to the attractiveness and diversity of beer and is nowadays gaining in popularity. The aim of this work was to determine the effect of dry hopping on sensory profile and analytical parametrs of dry-hopped beers using czech hop varieties. Sensory evaluation and chemical analysis of these beers were taken. The chemical analysis included determination of the basic beer characteristics, total phenolic a flavonoid content, antioxidant activity and the concentration of selected organic acids and chemical elements. It was found out that dry-hopped beers compared to the reference beer presented higher bitterness, antioxidant activity and contained higher amount of flavonoids. Also an increase in pottasium, manganese, copper, calcium and malic acid levels was reported. The pH of beer samples was not affected by dry hopping. Sensory evaluation showed that dry hopping had a positive influence on the overall enjoyment of the beer, which was mainly determined by the higher aroma and more intense bitterness. By summaring all the data, it is obvious that dry hopping of beer using new czech hop varieties has a positive effect on the quality of the final beer and these hop varities are suitable for further use in the beer industry.
|
|
|
Characterisation of alcoholic beverages by means of spectrospic methods
Fajtl, Zdeněk ; Omelka, Ladislav (referee) ; Polovka, Martin (advisor)
The bachelor’s project is focused on the problem of determination of thermo-oxidative stability of mixed Radler - type drinks with low alcohol content. The project consists of both, theoretical and practical parts. The theoretical part describes the basic technological procedures used in the production of lager-type beer and also mixed drinks of Radler type. It also deals with the issue of antioxidants and/or oxidative processes with specific focus on beer and its components. The author also pays attention to spectroscopic methods, which are recently extensively applied to characterize different qualitative and quantitative parameters of foods; predominantly UV-VIS, IR and EPR spectroscopy. These methods were chosen with respect to the topic being studied. In the experimental part, the application of EPR spectroscopy and spin traps methods for the characterization of thermo-oxidative stability of the selected group of commercially available samples of Radler-type beer is presented. The values of the induction periods which were taken as a measure of thermo-oxidative stability, are compared, both for the group of Radler-type beers under study and for the commercially available samples of typical lager-type beers of identical producers, which were taken as for reference.
|
|
|
Beer bioflavouring by dry hopping using czech cultivars of hops
Gajdušek, Martin ; Štursa, Václav (referee) ; Pořízka, Jaromír (advisor)
This diploma thesis deals with the influence of dry hopping on selected analytical and sensory properties of beer. The effect of dry hopping was observed using Czech hop varieties Kazbek and Uran, which were added to the wort during the main fermentation phase in doses of 3 and 6 gdm-3. The contact time of hops with wort was 3, 6 and 9 days. The experimental part describes the technology of preparation of the reference beer, in which dry hopping were subsequently performed. A parallel measurement was performed on each sample. In terms of the basic parameters of beer, the effect of dry hopping, especially its length, on the ethanol content was observed. With a longer period of dry hopping, the concentration of ethanol in beer increased. The higher alcohol concentration was also associated with a decrease in the apparent extract. In terms of color and pH of beer, the effect of dry hopping has not been proven. Elemental analysis performed by optical emission spectrometry with inductively coupled plasma revealed an increase in the concentration of calcium, magnesium, and iron due to dry hopping. No statistically significant difference was observed for manganese and barium compared to the reference. In terms of bitterness, a significant increase was identified in dry hopped beers compared to the reference, the value being dependent on the dose of hops used. The effect of the hop variety has not been proved. Concentrations of organic acids determined by ion-exchange chromatography with a conductivity detector were affected by dry hopping only in the case of lactic acid and acetic acid. An increase in lactic acid was observed compared to the reference, also related to the degree of fermentation. While in the acetic acid content the hop samples showed a lower concentration than the reference sample. The concentrations of myrcene, humulene and geraniol were determined by gas chromatography with a mass detector. These are volatile components of hop essential oils. Dry hopped samples recorded significantly higher concentrations of all aromatic substances compared to the reference. In terms of hop time, the highest concentrations were shown by samples hopped for three days. The results of the sensory analysis show that the overall best rated sample is a sample hopped with the Kazbek variety with a dose of 3 gdm-3 for three days. Beer which was dry hopped for the shortest time also showed the lowest intensity of bitterness, which was perceived positively.
|
|
|
Determination of selected parameters in special types of beers brewed in the Czech Republic
Fähnrichová, Nikola ; Divišová, Radka (referee) ; Diviš, Pavel (advisor)
This bachelor thesis deals with analysis of special types of beer brewed in the Czech Republic using three instrumental methods. Polyphenols were determined by high performance liquid chromatography. To determine organic acids was used ion exchange chromatography. Elementary analysis was performed by inductively coupled plasma optical emission spectrometry. The theoretical part of the work describes technology of beer production, chemical composition of beer, especially groups of substances which were analysed in this thesis. Principle of used methods is also described. The practical part of the work deals with preparation of tested samples, calibration samples and process analysis. The obtained results of analysed substances are summarized in the tables, discussed and compared with results of analysis of other authors. For the analysis it was used eighteen different types of special beer produced in the Czech Republic.
|
|
|
Home brewery
Hlubinka, Jakub ; Tuhovčák, Ján (referee) ; Hejčík, Jiří (advisor)
The Bachelor’s thesis deals with phenomenon of home-brewing. The first part focus on technology of brewing with understanding is entry requirement for correct draft of home brewery. Second part describes possibilities of specific solution and configuration of each component of equipment for beer production in home environment. At the end is project of home brewery suitable for training of measurement and regulation in Master's degree program „Environmental Engineering.“
|
|
|
Pretreatment of hops for further processing in beer technology
Tichá, Anna ; Štursa, Václav (referee) ; Pořízka, Jaromír (advisor)
This diploma thesis deals with pre-treatment of hops for further processing in beer technology. In the experimental part of the work, the effect of low temperatures, as pre-treatment of hops, on the monitored parameters was observed. Three types of cold pretreatment were used. In two cases, the hop material was frozen using a freezer at -25 ° C and in the second case at -70 ° C. In the third case, the hop material was treated by contact with liquid nitrogen in combination with mechanical treatment. The variety of hop materiál was Žatecký poloraný červeňák, which were in the form of pellets or pressed hop cones. The total bitterness of the samples, the total content of phenolic substances, the total content of flavonoids, the antioxidant activity and the concentration of essential oils, specifically myrcene humulene and geraniol, were examined. The effect of pre-treatment was investigated during conventional worth boiling as well as dryhopping. The experimental part includes descriptions of the hopping process, descriptions of individual analytical methods. A parallel measurement was performed on each sample. Significant advantages or disadvantages of some of the pretreatments were not demonstrable, however, the most significant differences were observed in samples hopped with hops pretreated by freezing at -70 ° C, which had a positive effect on the amount of extracted essential oils during cold hops.
|
|
|
Evaluation of the influence of the pasterization and filtration on selected chemical components of beer
Vopelková, Dominika ; Diviš, Pavel (referee) ; Pořízka, Jaromír (advisor)
The aim of this work was to study the influence of the pasteurization and filtration on selected chemical compounds in beer. Specifically, the influence on elemental composition, content of organic acids, carbohydrates and phenolic substances was studied. Optical emission spectrometry with inductively coupled plasma (ICP-OES) was used for elemental analysis of beer. Analysis of organic acids was evaluated by Ion chromatography. For analysis of carbohydrates was used High performance liquid chromatography with ELSD detector (HPLC-ELSD), phenolic compounds was evaluated by HPLC with diode array detector (HPLC-DAD). Data from analysis of beer was performed by usage of statistical methods (analysis of variance and principal component analysis). Parameters that showed the most significant differences between individual groups of beers were obtained. Correlations between the variables and the technological beer processing operations were found. 12 parameters of total 23 were affected. The effect of filtration and pasteurization was observed in content of the iron, silicon, potassium and magnesium, malate, monosaccharides glucose and fructose and phenolic compounds.
|
guest ::
