|
|
Planetary, cycloidal, worm, screw, harmonic gearboxes
Čišecký, Damián ; Pokorný, Přemysl (referee) ; Malášek, Jiří (advisor)
This bachelor's thesis focuses on planetary, cycloidal, harmonic, screw and worm gearboxes, providing an insight into the design, calculations and applications of these mechanisms in the transmission of mechanical energy. It contains clear schematic drawings, construction documents and calculations of transmission ratios, with an emphasis on current manufacturers and technical parameters.
|
|
|
Concepts of electric vehicles drivetrain
Bede, Filip ; Píštěk, Václav (referee) ; Kučera, Ondřej (advisor)
This bachelor thesis focuses on a review, analysis and comparison of current electric vehicle drive concepts that form the basis for modern electric vehicles. For a better understanding of the composition and application of the concepts, the individual elements of the powertrain have also been discussed in detail in the thesis. The thesis starts with a brief overview of important milestones in the field of electric mobility. It then continues with a detailed discussion of the electric motors, batteries and gearboxes used. These are followed by drive concepts analysed in terms of their impact on the drivability and efficiency of electric vehicles. Examples of modern electric vehicles are then given to demonstrate the concepts in practice. Finally, current internal combustion engine drive concepts are also presented and compared with EV concepts, thus providing a comprehensive view of current trends in automotive technology.
|
|
|
Gear trains in automotive electric drives
Vlaha, Ondřej ; Poulíček, Matěj (referee) ; Neuman, Ondřej (advisor)
This bachelor thesis deals with the research in field of gearbox applications in electric vehicles. It describes the classification of electric vehicles depending on the type of their powertrain. It also discusses the distribution of electric motor designs and analyses the parameters that affects the efficiency of the drive train. A numerical model of Tesla Model 3 was created in Matlab Simulink to illustrate the effect on powertrain efficiency when using single or dual speed transmission under different driving cycles.
|
|
|
Production technology for parts of a winder gearbox
Riasnyi, Artem ; Sliwková, Petra (referee) ; Zemčík, Oskar (advisor)
The thesis focuses on the design of the production of two key gearbox components – the output shaft and the gear wheel. The aim was to optimize the production of these components through the selection of suitable machining equipment, cutting tools, and cutting conditions. Two production variants with different replaceable carbide inserts for lathe knives were compared for the output shaft. For the gear wheel, variants with different drills and carbide inserts for groove pinning were compared. The results indicate that the first variant of the output shaft production is advantageous in terms of both time and costs, whereas for the gear wheel, the second variant is advantageous in terms of time. Further optimization of cutting conditions is recommended, along with consideration of alternative tool selection to further improve efficiency and reduce production costs.
|
|
|
Design of automobile automatic transmission for presentation purposes
Pospíchal, Jiří ; Rekem, Jakub (referee) ; Otipka, Václav (advisor)
The bachelor thesis deals with the design of structural modifications of automotive planetary gearbox with hydrodynamic converter for resentation and educational purposes. The introductory part of the thesis focuses on the reasons for the use of automotive gearboxes in cars. The review part of the thesis focuses on a detailed description of the types of automotive gearboxes offered by automobile manufacturers, naming their advantages and disadvantages and comparing them with each other. The main part of the thesis describes the design of automatic planetary gearboxes of class 09G. It analyzes the gearbox systems and describes their functions in detail. The thesis concludes with a proposal for gearbox design modifications for presentation purposes, based on the knowledge of the design of Class 09G gearboxes gained during the writing of the thesis.
|
|
|
Wind power plant
Šponiarová, Petra ; Prokop, Aleš (referee) ; Řehák, Kamil (advisor)
The electricity production from renewable sources is a very current topic. It also includes the electricity made by wind power plants, which the bachelor’s thesis concentrates on. An extensive research study was conducted to provide an overview of wind turbine types. Concerning wind power plants, apart from their visual impact, noise and vibration connected to their operating is an often discussed issue. The construction of a wind turbine stands for the most important role in reducing such unwanted effects. Technical experiments following specific standards and recommendations are performed to assess the impact of wind turbines-emitted noise and vibration on humans. In order to assess noise and vibration of a wind turbine a technical experiment is proposed, which uses different approaches to determine the critical components. The selection of a suitable measuring equipment and the choice of location for its subsequent use are important parts of the design. At last, the use of wind power plants is critically reviewed.
|
|
|
Construcion of small-serie sport car
Brhel, Štěpán ; Beran, Martin (referee) ; Zháňal, Lubor (advisor)
The object of the bachelor thesis is to create review of used solutions to chassis and bodyschells of small-serie sport cars. Then selection of proper driving units, so engines and gearboxes. Last part considers rules governing connivance of small-serie sport cars for common traffic.
|
|
|
Usage of transmission at electric vehicles
Běloušek, Ondřej ; Prokop, Aleš (referee) ; Řehák, Kamil (advisor)
At first bachelor thesis divides different conceptions of electric vehicles with the aim to describe characteristic components which electric vehicles contain, and that make it different in comparison with conventional cars. From the principle of the electric vehicle it is obvious that electric energy which is necessary for electric drive must be stored and for this reason the batteries and important components are described. The next part is dedicated to the powertrain which is affected by the presence or absence of an internal combustion engine and its usage rate. Common feature is an electric machine which transforms electrical energy into mechanical energy, and which makes powertrain complete. Gearboxes used at electric vehicles are the next part which is affected by the type of power unit that they cooperate with. For that reason, one representative from each part is described. The representative of hybrid electric vehicles is planetary gear set of Toyota Prius 2010, representative of battery electric vehicles is one-speed transmission of Tesla cars and in the end the multi-speed transmission is mentioned because it is today´s trend. Because of the absence of an internal combustion engine for some types of electric vehicles, the noise and vibrations from gearbox come to the fore. The main source of the vibration is gears teeth contact and rattle of the other components. The last part of the thesis is focused on the design of a technical experiment that is suitable for measuring vibration and noise from two-speed automatic transmission. Firstly, the theoretical basis of measurement is described. The design itself takes into account the suitable measuring equipment, the right choice of components that realize closed loop and installation space of the acoustic chamber.
|
|
|
The Present State and Development Trends of Passenger Cars Gearbox Design.
Chuchma, Ondřej ; Rasch, František (referee) ; Blaťák, Ondřej (advisor)
The bachelor thesis includes complex information about nowdays gearbox, which are used for automobile. In general it describes constructional ordering and principles of function of gearbox. The next part provides the information about individual kinds of gearbox and compares their properties and parameter. The most extensive part is engaged in dual clutch gearbox as the most developing kind of transmission of automobile. In the end author deals with the most probable future development in branch of gearbox for segment of automobile.
|
|
|
Design of test rig for long-term testing of couplings intended for railroad applications
Machálek, Ondřej ; Prokop, Aleš (referee) ; Řehák, Kamil (advisor)
The master thesis deals with design of test rig for long-term testing of coupling appointed to railway vehicles. At first, there is made a brief research which is related to railway coupling used for transmitting a torque. This is followed by an analysis of the most used power devices to derive real loads conditions of tested couplings. There is chosen the most appropriate conception based on made analysis and it is followed by the description of designed components. There is made a verification of modal properties non-purchased components which is necessary part of the thesis. Numerical modal analysis was performed in ANSYS Workbench software. In the end of the thesis there are included stress-strain analysis of the chosen designed components.
|
guest ::
