|
|
Substrate integrated waveguide filter
Vyskočil, Jiří ; Tkadlec, Roman (referee) ; Láčík, Jaroslav (advisor)
In this thesis is discussed a filter design of a band-pass substrate integrated waveguide filter on the frequency of 5 GHz. It also includes design theory, filter synthesis, filter analysis in the program CST Microwave Studio® and the results of measurement on a vector network analyzer. The analysis results are compared with the measured results. Good agreement between simulated and measured results is observed.
|
|
|
Design of new active filters, using signal flow graphs
Jašek, František ; Kubánek, David (referee) ; Vrba, Kamil (advisor)
This master’s thesis describes the design of the frequency filters by the help of the graph of the signal flows. There are defined by modern components like GVC (Generalized Voltage Conveyor), GCC (Generalized Current Conveyor), CF (Current Follower), DO-CF (Dual-Output Current Follower), OTA (Operational Transconductance Amplifier), BOTA (Ballanced Operational Transconductance Amplifier) and CFTA (Current Follower Transconductance Amplifier), the graphs of the signal flows, which describe their activity in the thesis. In the other part of the thesis is illustrated the procedure of the design of the frequency filters by the help of the graphs of the signal flows. For the concrete design was selected in the first case as the active component double output current follower and in the second case the CFTA. There are noted all designed circuits of the frequency filters also their characteristic equations in this thesis. The activity of the selected circuits was remitted to the analysis in the simulation program called PSpice. Because the active components, with which was engaged in the design of the filter which doesn’t exist in the real form, that is why the UCC, which is sufficing for attestation of the function of the circuit, was used for the simulation. The simulation was implemented in the frequency range 10 Hz to 10 MHz.
|
|
| |
|
|
Frequency filter
Suchánek, Tomáš ; Kubánek, David (referee) ; Káňa, Ladislav (advisor)
The main objective of this thesis is to design and implement integration that will be building block for tunable active filters 2nd range of low , high and band pass through the jet structure Sallen - Key. This work first examines the use of different types of frequency filters, the detailed design of the components and selection of a suitable operational amplifiers for participation. Practical part focuses on the production of the finished product, measure its parameters resulting in graphs.In implementing are used software such as simulation programme Micro-cap and layout editor Eagle.
|
|
|
Visualization of vocal cords movement
Kutálek, Libor ; Sekora, Jiří (referee) ; Rozman, Jiří (advisor)
The aim of this work is to clarify the function of the vocal cords and get familiarized with their investigative methods. In this work we find possible solutions to the peripheral device to illuminate the rapidly vibrating vocal cords using an LED that is less energy exacting than conventional halogen lamps. Then there are solved the problems of processing, signal filtering and finding the natural frequency of vibration of the vocal cords.
|
|
|
Ultrasound blood flow detector
Kameníček, Robert ; Dlouhý, Jiří (referee) ; Rozman, Jiří (advisor)
My master’s thesis deals with methods of measuring the ultrasonic blood flow blood vessel with a detailed focus on Doppler ultrasound systems, which find application in the diagnosis of superficial vascular and obstetrics. The thesis is described a proposal indicating polydirectional Doppler system with a continuous carrier wave frequency of 4 MHz, the intensity of ultrasound 100 mW/cm2 and diameter D-shaped transducers 8 mm. As a result, the indicator will be able to measure blood flow velocity in the range of 5-40 cm/s, which appears to 3.5 digit display. After describing important theoretical assumptions, the work pays block diagram indicator. Furthermore, it examines the various functional blocks on the requirements imposed on them. It looks at the options of each functional block, and finally describes the implementation of the selected option and including peripheral solutions. Great attention is paid to the power of the indicator, where the power supply will be used 9 V battery. Create a symmetric voltage for operate amplifier and other auxiliary voltage will procure DC/DC converters. In conclusion, the work is located around the perimeter solutions indicator. The following draft for the production of double-sided PCB, its installation and a list of elements. The outcome of the thesis is complete documentation for the implementation of an indicator of blood flow, which allows us to obtain information on throughput vessels, especially the lower and upper limbs.
|
|
|
Electronically controllable frequency filters with current active elements
Suchánek, Tomáš ; Lattenberg, Ivo (referee) ; Kubánek, David (advisor)
The aim of the thesis is to study the possibilities of the electronic frequency ?lter com- posed of active elements operating in current mode. The main opportunities lie in the change control parameters, most are marginal or quality factor frequency. As the active elements are considered especially CC (Current Convejor), controllable current ampli?er DACA (Digitally Adjustable Current Ampli?er) or combination with the current tracker MO-CF (Multiple Output Current Follower). Another part will focus on the management of the above parameters using digital potentiometers and choosing the appropriate ?lter structure. The ?nal task was to digital control parameters using a PC and measuring its properties.
|
|
|
Satellite Receiver with Integrated Antenna Tuner
Matoušek, Martin ; Pítra, Kamil (referee) ; Urbanec, Tomáš (advisor)
This work is focused on proposal of receiver with Integrated Antenna Tuner operating at 28 MHz. The design was primarily focused on simplicity and low power consumption. The receiver is adapted for SSB modulation. This work was realized for the transmission of audio signals. SSB modulation is far more efficient in terms of the radio spectrum used. First part of this thesis describes about the Antenna Tuner and block diagram of a receiver. Next parts are focused on proposal of individual blocks of the receiver, especially its most important parts. Finally, the overall evaluations of the design characteristics of SSB receivers with Integrated Antenna Tuner are discussed.
|
|
|
ARC filter for frequency analyser
Janečka, Martin ; Murina, Milan (referee) ; Sedláček, Jiří (advisor)
The aim of this work is to propose and realization an active frequency filter with a 4th grade bandpass for making it possible to electronically tune the resonant frequency in range of 10Hz to 100kHz and adjust bandwidth. The thesis discussed two possibilities of filter connections using cascade synthesis. To choose a better option a filter simulations were made in Pspice. Based on the simulations, the number of components and the possibility of electronic tuning a better option is selected. This circuit is implemented, measured and then compared with simulations.
|
|
|
Frequency Filters with Controllable Current Followers
Novotný, Matouš ; Herencsár, Norbert (referee) ; Koton, Jaroslav (advisor)
Submitted work engage in suggestion and realization of frequency-selection filters with usage one or more active devices CMI (Current Mirror and Inverter). The preamble of thesis is applied to theory of frequency-selection filters and possible usage of them. The projected circuit layouts are discussed next to would be possible change some of choice parameters of frequency-selection filter. The part of thesis is numerical suggestion of found solutions, their simulation in suitable program and realization.
|
guest ::
