|
|
Belt conveyor for brown coal
Bezděk, Marek ; Pokorný, Přemysl (referee) ; Malášek, Jiří (advisor)
The main key in this bachelor thesis is to calculate and design conveyor belt for transport of brown coal for the transport capacity of 140,000 kg per hour and the height difference of 10,5 m and axial distance between the drums at the both ends of 50 m. First part of the work is focused on the main parts of the conveyor belt construction. Then follows the part with the calculation of conveyor belt according to norm ČSN ISO 5048, which is then used for designing of the main parts of the conveyor belt and its dimensions. The thesis is extended by the required technical drawings.
|
|
|
Adjustable belt conveyor
Drápalík, Martin ; Malach, František (referee) ; Malášek, Jiří (advisor)
The aim of this thesis is to design a conveyor belt readjustable to transport brown coal according to specific parameters. The introduction is focused on describing and dividing conveyor belts and characterizing their individual parts. The main part of the thesis is a description of selected components and design solutions, a functional computation carried out in accordance with the standard ČSN ISO 5048 and further an analysis of transported material's properties. The drafting documentation is attached to the thesis.
|
|
|
Belt conveyor for crushed limestone
Haša, Jakub ; Pokorný, Přemysl (referee) ; Malášek, Jiří (advisor)
The aim of this bachelor thesis is to present a structural design of a belt conveyor for crushed limestone. The transport distance is 28 meters with superelevation of 7 meters. The traffic performance of the belt is set at 43,000 kg.h-1. The structural design depends on calculation according to the standard ČSN ISO 5048. The study contains brief description of basic parts, followed by control calculation of bulk material and drive pulley. The attachment includes necessary drawing documentation.
|
|
|
Adjustable belt conveyor
Drápalík, Martin ; Malach, František (referee) ; Malášek, Jiří (advisor)
The aim of this thesis is to design a conveyor belt readjustable to transport brown coal according to specific parameters. The introduction is focused on describing and dividing conveyor belts and characterizing their individual parts. The main part of the thesis is a description of selected components and design solutions, a functional computation carried out in accordance with the standard ČSN ISO 5048 and further an analysis of transported material's properties. The drafting documentation is attached to the thesis.
|
|
|
Mobile belt conveyor
Tenora, Jiří ; Škopán, Miroslav (referee) ; Jonák, Martin (advisor)
The aim of this work is to design a mobile conveyor belt to brown and black coal. The thesis contains a theoretical part, which describes all the components of the conveyor belt further functional calculations according to ISO 5048, the calculation of the performance conveyor, conveyor overall dimensions, the design of the drive, the tensioning device, strength calculation of selected parts and undercarriage.
|
|
|
Inclined belt conveyor of aggregates
Švásta, Petr ; Jonák, Martin (referee) ; Škopán, Miroslav (advisor)
The aim of this work is the proposal inclined conveyor belt for transporting the aggregate maximum grain size up to 150mm. Functionalcalculation is made according to ISO 5048 Belt conveyor supportingrollers. The report contains a brief description of the function, use anddesign of the conveyor and its affiliates. On the basis of specifieddimensions is processed transporter function calculation, a simplifieddesign and conveyor tensioning devices. The work is accompanied bydrawings stretching equipment and conveyor assemblies.
|
|
|
Belt conveyor for transport of food corn
Štěrba, Josef ; Pokorný, Přemysl (referee) ; Malášek, Jiří (advisor)
The purpose of this bachelor´s thesis is design construction of the belt conveyor for transport of food corn in to the axial distance of dune 24 metres and diference of height 6 metres and transport output of 150 000 kilogram per hour. Thesis contains a brief description of the basic components of the conveyor, section calculation according to the norm CSN ISO 5048, identifying the main dimensions, design the drive and tension system of the conveyor and strength calculation of the driven drum. Thesis also includes the calculation of lifetime control of the powered drum bearings and threaded rod for buckling. Finally, it analyzed the characteristics of the transported material. Thesis is accompanied by the required documentation.
|
|
|
Belt conveyor for transport of brick chippings
Menoušek, Martin ; Pokorný, Jan (referee) ; Malášek, Jiří (advisor)
The aim of this bachelor thesis is to design a sloped conveyor belt to transport the crushed brick. Entered parameters are the transporting length 65 m, height 12 m and transporting kapacity 125 t/hr. The thesis includes functional calculation conveyor belt, design tensioning station, design spring tension, the calculation of the drum shaft and design tensioning rod.
|
|
|
Portable conveyor for aggregate
Šarman, Michal ; Kašpárek, Jaroslav (referee) ; Škopán, Miroslav (advisor)
The aim of this bachelor thesis is to design portable belt conveyor for aggregate of given parameters. The introduction contains classification of conveying machines and devices. Further chapters are dealing with the actual design of the conveyor, functional description of individual parts, selection of components, and functional calculation according to ISO 5048 standard. The final chapter specifies maximum weight delivery and overall review of the machine. The work is suplemented by mechanical drawings.
|
|
|
Belt conveyor for quartz sand
Vala, Martin ; Pokorný, Přemysl (referee) ; Malášek, Jiří (advisor)
The aim of this bachelor thesis is to design a belt conveyor according to the assigned parameters: conveyed material, conveyor capacity, axial distance between the drums at both ends and height difference. On the basis of these parameters a functional calculation is conducted in accordance with the standard ČSN ISO 5048. The main dimensions of the conveyor were determined as well as suitable components further described in the thesis. All necessary parts were designed. The thesis also includes strength calculation of drive shaft, calculation of bearing durability used for the drive shaft and calculation of safety factor in relation to limit state of bolt strut stability of tension mechanism. The conclusion part is focused on the evaluation of the designed conveyor when used for materials of different grain size and humidity. Required designed drawings are annexed.
|
guest ::
