|
|
Detached house with a sports equipment rental
Rouče, Tomáš ; Bantová, Sylva (referee) ; Fišarová, Zuzana (advisor)
The focus of the bachelor thesis is development of project documentation for construction creation level of detail. Object in question is detached house with sports equipment rental buiness. The detached house is designed for a five-member family, who will also be owners of the rental and service business. The building is situated on a gently sloping plot in the village of Borová Lada in the Šumava National Park. The house does not have a basement. There is one ground floor and residential attic under a sloped gable roof with two shed-type dormers. The rental business and garage are part of the main structure. The vertical load-bearing structures are designed using the YTONG system, specifically aerated concrete blocks and sand-lime bricks. The detached house is founded on concrete foundations created using permanent formwork from concrete blocks. The horizontal structures are monolithic reinforced concrete. The building's roof is constructed using the YTONG system with prefabricated beams and inserts connected using concrete forming a solid roof structure. The drawing part was created using the Archicad software from GRAPHISOFT.
|
|
| |
|
| |
|
|
Detached house, Horní Lhota
Šenovský, Jan ; Vystrčil, Jan (referee) ; Kacálek, Petr (advisor)
The aim of the bachelor´s thesis is to develop the design documentation for the construction of the detached house with an establishment which is a design office. It is single-family home which is half-buried into the sloping terrain. The building has partial basement, one ground floor and attic rooms. Functionally it is divided into two parts, which are detached house for five-member family and design office for four colleagues, the design office is single-storey. Both parts are connected. The structure of the building is proposed as traditional masonry building, the external walls in the basement are from concrete blocks of permanent formwork. The internal walls in the basement and also the walls on the ground floor and in attic rooms are from brick blocks. The floor-structures are proposed as half-prefabricated rib-and-filler system Miako with concrete grout. The roof structure of the detached house is designed as traditional timber roof truss with middle purlins, which are supported by walls in attic rooms. There is proposed insulation over rafters with exposed rafters in the interior. The roof structure of the design office is warm flat roof with a 3% slope, the roof drainage is provided by rain gutter, which is situated in the north-west side, where is no parapet wall. The facade of the building will be made as ventilated, external wall finish is combination of concrete and timber cladding.
|
|
|
The family house
Osička, Martin ; Sedlák, Radek (referee) ; Sedlák, Radek (referee) ; Beneš, Petr (advisor)
The theme of bachelor’s thesis is an elaboration of design documentation of the family house. Building site for the planning building is located near the center of the town Hodonín.The building is designed for four-membered family. The object is projected as a detached house with two-storeys and no cellar. Walls are designed as a single layerd brickwork of ceramic blocks mansoried on thin-layerd mansory mortar. Construction of the ceiling above the 1st floor is made of ceramic-concrete MIAKO system with a layer of concrete over it. Stairs connecting both 1st and 2nd floor is designed from reinforced concrete. The roof is designed by two mirror-facing ramp roofs of 5% gradient with a PVC foil covering, thermal insulation is designed as over-rafter. The load-bearing structure is made up of lamellated timber rafters. The paved areas, forming an entry walkway and a parking space for the standing of 2 cars, are designed from concrete paving. Part of the surface will be covered with a steel construction with a CONNEX safety glass cover. Project documentation was developed in ArchiCAD programme.
|
|
|
Family business house
Jurák, Vítězslav ; Papranec, Michal (referee) ; Fuciman, Ondřej (advisor)
Bachelor’s thesis called House with an establishment is done as a documentation for building construction. By the establishment is meant office area which is connected to the house functionally. The object is situated in city of Štípa in new build-up area. House plan is not regular. It has two floors above ground and irregular shape. The saddle roof has skylights with different slope angles (26 or 18 degrees). On the west side of the object there are large terraces. Construction solution is systematic, Porotherm. The baseplate construction is made of concrete.
|
|
|
Mountain accommodation Jadrná
Lukešová, Michaela ; Hnízdilová, Aneta Aya (referee) ; Manychová, Monika (advisor)
The subject of the diploma thesis is the development of project documentation for the construction of an object for short-term recreation with almost zero energy consumption in the village of Orlické Záhoří. The building is designed as a two-story basement, covered with a gable roof, which is partially embedded in the terrain. The building offers eleven accommodation units, including a fresh bar and relaxation in the sauna world.
|
|
|
The Environmental Centre
Hanáček, Patrik ; Berka, Pavel (referee) ; Donaťáková, Dagmar (advisor)
This theses provides a complete study and all encompassing plan for the creation of an environmental centre on the edge of the South Moravian village “Horní Němčí”. During my thesis we will refer to my plans for this build as simply “Bílé Karpaty”. The building is situated on a large gently sloping plot and is intended for educating children and youth groups in the field of ecology, nature protection and human impact on the landscape in PLA “Bílé Karpaty”. This environmental centre has great potential for drumming up interest in the form of eco-tourism and for raising public awareness of environmental topics. Planned forms of education consist of lectures in teaching rooms, practical workshop sessions, outdoor activities and experiential programs in the surrounding environment. “Bílé Karpaty” environmental centre has a capacity of twenty students per day time session. The optimal teaching format would comprise of three trainers and three operational staff at a time. The building consists of a ground floor, first floor, partial basement and a full size attic. The ground floor comprises of a dining room and the workshop. The dining room´s function is flexible, and can be used as a meeting room as well. The workshop will be where people experience practical demonstration of traditional handcrafts. The first floor contains two further rooms for teaching and operational offices. The basement performs the function of housing two necessary rooms, one technical in nature and one for food storage. During the design stage my intention was focused on the use of traditional building elements, namely wood, firebrick and stone, so the build sits comfortably in its surroundings.
|
|
|
Novostavba dřevostavby hlavní budovy rekreačního střediska
Bielesz, Robin
This thesis deals with the design of the main building of the mountain recreation center in the village Hrčava in Beskydy. In the text part, the options for the solution of the perimeter shell of the timbered building structure will be proposed. Based on the selected criteria, a suitable contractor will be selected and the production and assembly procedures of the selected company will be thoroughly described. In the practical part the project documentation will be prepared according to the assignment using the knowledge from the previous part of the final thesis. The scope and content of the project documentation will be made in the construction phase and will meet all required requirements.
|
|
|
Detached house, Horní Lhota
Šenovský, Jan ; Vystrčil, Jan (referee) ; Kacálek, Petr (advisor)
The aim of the bachelor´s thesis is to develop the design documentation for the construction of the detached house with an establishment which is a design office. It is single-family home which is half-buried into the sloping terrain. The building has partial basement, one ground floor and attic rooms. Functionally it is divided into two parts, which are detached house for five-member family and design office for four colleagues, the design office is single-storey. Both parts are connected. The structure of the building is proposed as traditional masonry building, the external walls in the basement are from concrete blocks of permanent formwork. The internal walls in the basement and also the walls on the ground floor and in attic rooms are from brick blocks. The floor-structures are proposed as half-prefabricated rib-and-filler system Miako with concrete grout. The roof structure of the detached house is designed as traditional timber roof truss with middle purlins, which are supported by walls in attic rooms. There is proposed insulation over rafters with exposed rafters in the interior. The roof structure of the design office is warm flat roof with a 3% slope, the roof drainage is provided by rain gutter, which is situated in the north-west side, where is no parapet wall. The facade of the building will be made as ventilated, external wall finish is combination of concrete and timber cladding.
|
guest ::
