National Repository of Grey Literature 10 records found  Search took 0.00 seconds. 
The application of high-speed water jet in civil engineering
Hudský, Petr ; Hela,, Rudolf (referee) ; Bodnárová, Lenka (advisor)
Bachelor thesis is focused on gathering available information about the use high-speed water jet in civil engineering The thesis describes types of water jets, used in industry, focusing in detail on the use in construction. Mentioned are also selected tools for rehabilitation. Was studied experimentally the influence of pressure water jets for various types of concrete, cutting depth, strength and pull-off test with the evaluation and comparison.
Optimization of hydraulic system for milling machining center
Smíšek, Tomáš ; Ranuša, Matúš (referee) ; Nevrlý, Josef (advisor)
The bachelor thesis is focused on the design of optimized solution of the hydraulic system for milling machining centre. The main points of this work are to assess the current condition, design optimization solutions, construction calculations, final optimized solution and summary of the optimization. The contracting company is HYTEK Ltd. dealing with construction of hydraulic equipments.
The Use of a Waterjet Technique in Finishing Operations
Jantač, Marek ; Osička, Karel (referee) ; Kalivoda, Milan (advisor)
The bachelor thesis deals with abrasive waterjet cutting. In the first part we dis-cuss the possibility of using an abrasive jet in various industries, its advantages and disadvantages. Furthermore, abrasive jet machining methods such as cutting, turning and milling. Then focuses on the technology at AWAC company, which were cut off samples for subsequent measurement. The aim of the measurements was to determine and compare the surface roughness of the samples were cut at different parameters.
The Strengths and Limitations of Input-Output Analysis in Evaluating Fiscal Policy
Líšková, Lenka ; Baxa, Jaromír (advisor) ; Kukačka, Jiří (referee)
"The Strengths and Limitations of Input-Output Analysis in Evaluating Fiscal Policy" by Bc. Lenka Liskova Abstract: The thesis addresses the recent debates on suitable macroeconomic policy and calls for an alternative evaluation and forecasting method of economic impact, by assessing the applicability of Leontief's input- output model. We concentrate on providing an insight into the entire process of input-output analysis, which yields computation of simple input-output multipliers - output, gross value added and income multi- pliers. Thanks to the ability to capture linkages in the economy, com- puted multipliers are used as a tool to evaluate the effects of vehicle scrappage schemes and ICT infrastructure investment subsidies applied within a sample of diverse developed countries - Australia, Germany, Japan, UK and USA. We also aim to provide a sufficient explanation of the input-output model and a computation manual based on the example of the Leontief open model and calculation of simple multipli- ers. In our research, we numerically evaluate the effects of fiscal stim- ulus measures in the automobile industry and ICT sector and provide their comparison among 5 countries with different industry structures. Most importantly, the thesis provides a suggestion for policy makers to consider applying input-output...
Optimization of hydraulic system for milling machining center
Smíšek, Tomáš ; Ranuša, Matúš (referee) ; Nevrlý, Josef (advisor)
The bachelor thesis is focused on the design of optimized solution of the hydraulic system for milling machining centre. The main points of this work are to assess the current condition, design optimization solutions, construction calculations, final optimized solution and summary of the optimization. The contracting company is HYTEK Ltd. dealing with construction of hydraulic equipments.
The Use of a Waterjet Technique in Finishing Operations
Jantač, Marek ; Osička, Karel (referee) ; Kalivoda, Milan (advisor)
The bachelor thesis deals with abrasive waterjet cutting. In the first part we dis-cuss the possibility of using an abrasive jet in various industries, its advantages and disadvantages. Furthermore, abrasive jet machining methods such as cutting, turning and milling. Then focuses on the technology at AWAC company, which were cut off samples for subsequent measurement. The aim of the measurements was to determine and compare the surface roughness of the samples were cut at different parameters.
Optimization of hydraulic system for milling machining center
Smíšek, Tomáš ; Horňák, Samuel (referee) ; Nevrlý, Josef (advisor)
The bachelor thesis is focused on the design of optimized solution of the hydraulic system for milling machining centre. The main points of this work are to assess the current condition, design optimization solutions, construction calculations, final optimized solution and summary of the optimization. The contracting company is HYTEK Ltd. dealing with construction of hydraulic equipments.
The application of high-speed water jet in civil engineering
Hudský, Petr ; Hela,, Rudolf (referee) ; Bodnárová, Lenka (advisor)
Bachelor thesis is focused on gathering available information about the use high-speed water jet in civil engineering The thesis describes types of water jets, used in industry, focusing in detail on the use in construction. Mentioned are also selected tools for rehabilitation. Was studied experimentally the influence of pressure water jets for various types of concrete, cutting depth, strength and pull-off test with the evaluation and comparison.
Procedure of introducing Kofola brand onto the german market
Procházka, David ; Sztogrynová, Miroslava (advisor) ; Mišovská, Soňa (referee)
Cílem práce je popsat možný nenákladný vstup značky a produktu Kofola na německý trh, resp. do Bavorska. Hypotézou práce je domněnka, že na bavorském trhu existuje mezera, kde cílový segment tvoří mladí lidé ve věku 18-30 let, kteří touží žít po svém a hledají svůj nápoj. V práci je dále rozpracována myšlenka vstupu vytvořením vlastní sub-kofola-kultury a rozšíření nápoje mezi jedince cílové skupiny pomocí multiplikace. Práce popisuje jeden možný proveditelný způsob vstupu ve městě Norimberk a nabádá k dalšímu výzkumu a zpracování dané tématiky. Podkladem práce bylo provedené dotazníkové šetření.
Kultura jako multiplikátor cestovního ruchu
Nekolová, Hedvika ; Krbová, Jana (advisor)
Práce analyzuje vybraný obor kultury a zkoumá jeho vliv na cestovní ruch. V úvodu práce jsou vymezeny pojmy kultura a cestovní ruch. Jelikož je kultura široký pojem, je práce zaměřena na kulturní památky a způsob jejich financování. Druhá část práce analyzuje kulturní památky v konkrétním městě v České republice a zkoumá jejich vliv na cestovní ruch v dané oblasti. Dále zde jsou navrženy možné varianty jak zvýšit pomocí kulturních památek cestovní ruch.

Interested in being notified about new results for this query?
Subscribe to the RSS feed.