|
|
Mechanisms of QoS assurance in fixed, wireless and mobile data networks
Václavek, Radovan ; Novotný, Vít (referee) ; Molnár, Karol (advisor)
This bachelor´s thesis deals with mapping technologies and base parameters used to guarantee the quality of systems in the local area networks, including wireless and mobile ones. I have focused mainly on requests and classifications, which are typical for the types of networks on link layer. In Ethernet I focused on the gradual trends in the fore mentioned technologies and IEEE 802.1Q and connected IEEE 802.1p standards included. The next part describes the quality of systems in wireless nets in different types of environments and again uses given standards for quality of systems guarantee in 802.11e and connected 802.11a/b/g standards. The next part focuses on the latest generations of mobile nets, looking at the types and trends of the latest technologies. Here I draw from standard project 3GPP, which describes the problems with these technological developments. The next part focuses on WiMAX technologies. In the penultimate paragraph, the constituent network technologies are compared from the view of securing QoS and I propound possible ways of securing coversion of constituent technologies. The conclusion summarises all the technologies I have mentioned and the future trends including possible problems and challenges with these latest technologies.
|
|
|
Universal Tester of Radio Conditions for Narrowband IoT Communication Technology
Možný, Radek ; Štůsek, Martin (referee) ; Mašek, Pavel (advisor)
Technology Narrowband IoT is a representative LPWA (Low Power Wide Area) tech-nology that due to its promising features aims for demands of the Internet of Thingsapplications for autonomous data sending from sensors in areas of poor mobile coverage.For such applications, it is beneficial to firstly map properties of communication technol-ogy in areas of intended use and evaluate whether or not is this technology applicable.This Master thesis deals with the design of the hand-held measuring device for evaluationof Narrowband IoT properties. The output of this thesis is firstly comparison of LPWAtechnologies secondly, design of the mentioned device and verification of its functional-ity. And in last part description of measurement of transmission delay for delay-tolerantapplications. Transmission delay is a critical parameter for delay-tolerant applications.Such an application can be, for example, smart electrometers for which there is definedmaximal allowed transmission delay of 10 seconds and therefore it is desirable to evalu-ate whether or not is the deployment of the communication technology Narrowband IoTsuitable in the intended area for delay-tolerant or even for delay-intolerant applications.
|
|
|
MANET Routing Protocol with Quality of Service Support
Vajsar, Pavel ; Medvecký, Martin (referee) ; Bečvář, Zdeněk (referee) ; Koton, Jaroslav (advisor)
The web and mobile web traffic is growing rapidly due to service accessibility in densely populated areas and massive usage of smart hand held devices (smartphones, pads and Internet dongles). This is a challenge for mobile operators and service providers, because it forces systematically increasing network throughput capacity and in parallel to keep this investment on profitable basis. On the other side, the user satisfaction with mobile broadband service should be considered as well, in order to balance the user expectations and mobile operator investments. Our work provides extensive QoE study for different conditions in sense of mobile web service, web content, network conditions and end user device. Finally, the obtained results create basis for more dimensional overview of mobile web QoE and allow to recognize quality and saturation thresholds based on network parameters. Further, obtained data provide base for design three prediction models for prediction of MOS (one for notebook, one for mobile device) and acceptability.
|
|
|
Planning of UTMS access networks
Spěváček, Jiří ; Kapoun, Vladimír (referee) ; Novotný, Vít (advisor)
The master thesis is focused on the Universal Mobile Telecommunications System (UMTS) - the third-generation cell phone technology. The first part describes the development of mobile networks and the structure of the UMTS. The second part, the main part of the thesis, is focused on the planning procedure of the UMTS access network. It consists of an explanation of the general planning procedure and a specific project designing the coverage of Pelhřimov surroundings. The final part of the thesis contains a laboratory problem including instructions.
|
|
|
The realization of the data communication for application to the mobile networks
Sodomka, Lukáš ; Růčka, Lukáš (referee) ; Jelínek, Mojmír (advisor)
Thesis deals with data technology, which can be used for communication between mobile and IP networks. The aim of the project is to design data communication and the subsequent implementation of the mobile and IP networks. First of all, it made an introduction to telecommunications systems with focus on GSM. Subsequently, the work examines data provided by GSM technology standard with a focus on GPRS, which is in the other chapters discusses in more detail. The resulting communication application protocol is designed in two versions, which is achieved by the creation of an autonomous system. Communication is implemented using JAVA programming language, which created an application client, server and implemented application protocol. Client application is tested on a mobile phone with Internet connection with support for GPRS technology. Server application is installed on a PC workstation, which is assigned a public IP address, it is easily addressable from the Internet.
|
|
|
Simulation and evaluation of scenarios running real-time UMTS services in Opnet Modeler environment
Klimeš, Roman ; Molnár, Karol (referee) ; Novotný, Vít (advisor)
This work deals with the Universal Mobile Telecommunications System problems. It researches the parameters of influencing the UMTS Terrestrial Radio Access Network behaviour where is the Quality of Services support necessary. The aim of this master’s thesis is the simulation and evaluation of scenarios running real-time UMTS services in Opnet Modeler environment. In the first part is the short introduction to this technology problem. The requirements and the aims, the frequency plan, the network architecture and the Quality of Services support in UMTS are described. Creating the mobile network in the OPNET Modeler environment, configuration of the particular elements with the correct functionality and finally the parameters configuration for the Quality of Service at all workstations was the practical part of this work. At last phase was needed to compare the final statistics of the model without QoS support and the model with QoS support. I verified my knowledge in the OPNET Modeler program and the expected simulation results were confirmed. The final part of the thesis was creating the laboratory problem on the basis experience gained.
|
|
|
Project for Utilizing Mobile Technology in a Company
Martincová, Petra ; Štěpánek, Ladislav (referee) ; Kříž, Jiří (advisor)
This bachelor's thesis introduces basic terms and principles that are currently used in mobile technologies. In addition, a list of operating agencies which can be found on the czech market is included. The offers of operating agencies are evaluated based on the provided information, and the company can choose an offer which would reduce its expenses. One of the offers is chosen as a particular solution which suits the company best.
|
|
|
Project for utilizing Mobile Technology
Makovský, Marek ; Smílek, Pavel (referee) ; Kříž, Jiří (advisor)
In my present work first I introduce the readers to the development of the standard of the prezent wireless mobile network and consequent possible development together with introducing certain recommendations. In the first, theoretical part, are described commercial wirelees systems used by most mobile operators in Europe. The following part deals with the analyses of the present situation and summarizes existing ceses of using mobile technologies. The last part deals with concrete projects recommanding utilizing mobile networks and summarising the problemes of data communication between the controlling part and transmitting terminal on the other end. In the conclusion you will find the recommandation.
|
|
|
Convergent Mobile Technology Solutions for Corporate Customers
Stančík, Michal ; Tomek, Martin (referee) ; Kříž, Jiří (advisor)
Bachelor’s thesis deals with ways how to use convergent solutions of mobile technologies as benefit for corporate customers, especially small real estate agency. Theoretical area describes basic voice and data transfer’s principles and technologies in mobile networks. Second part analyse key working processes and tries to reveal deficiencies in current real estate agency’s telecommunication system. Practical proposal shows how to remove discovered deficiencies by adjustment of key working processes and afterwards apply the most useful functionalities of convergent solution. In the end there is a costs comparison between current and suggested telecommunication system.
|
|
|
HW platform for surveillance over maritime container transport
Roško, Tomáš ; Možný, Radek (referee) ; Musil, Petr (advisor)
The complexity of international transportation is increasing, and with that, the logistics requirements also increase: such as the need to monitor containers’ location or measure inside conditions. Despite these demands, marine transportation faces specific technical problems, such as the need for sending data precisely, often, and with low energy consumption. This paper aims to create a monitoring device that meets the demands of marine transportation. The device combines satellite and mobile networks to control the container location and, at the same time, allows for precise pinpointing of place and availability of access while having low battery consumption. The theoretical part of the paper explains the process of selecting components and justification of the process with regard to market options. The practical part contains a diagram of the connection of the modules and sensors. Next, the design and manufacture of the printed circuit board and custom 3D printed box are discussed. The software part deals with data protocol and the description of the application, which is then tested with a particular focus on measuring and transmitting the values onto the server.
|
guest ::
