|
|
Lifting roller table
Korytář, Jan ; Malášek, Jiří (referee) ; Kašpárek, Jaroslav (advisor)
This thesis deals with the current lifting devices and conceptual design of the lifting roller table, which serves as a knot on the transport line. The table is used to transport 1000 kg EUR pallets, with a 200 mm height change required. The thesis contains a brief analysis of the lifting structures, the design of the roller track, the design and strength calculations of the scissor mechanism. It also includes assembly drawings, frame subassemblies, and workshop drawings.
|
|
|
Positioning board for a pallet
Zábojník, Petr ; Malášek, Jiří (referee) ; Kašpárek, Jaroslav (advisor)
This bachelor's thesis deals with the design of static placement table for lifting loaded EUR palettes. Load capacity of the manipulator should be at least 1500 kg and lift height from the zero position at least 700 mm. Furthermore it should be possible to switch between electrical and hydraulic drive. This thesis consists of two parts, technical report and drawing documentation.
|
|
| |
|
|
Production line of car lock
Vincenc, Josef ; Mazal, Pavel (referee) ; Dvořáček, Jiří (advisor)
The Bachelor’s thesis deals with the part of the production line for the car lock assembly. It describes the construction of the automotive latch and its development and operation. The main part deals with the construction of the automatic punching station for labeling automotive latches. It solves three main parts of the appliance, which are a lifting table, punching and a frame. The appliance is used for industrial purposes.
|
|
|
Mobile Lift Table Capacity 800 kg
Fajkus, Pavel ; Pokorný, Přemysl (referee) ; Škopán, Miroslav (advisor)
This thesis deals with design solutions and strength calculations scissor lift table with a capacity of 800kg. The report contains an overview of existing search scissor platforms, types of storage free end scissors, raising the possibility of execution, storage hydromotors, calculate the minimum power lifting, strength control pins, bending calculation of scissor arm, friction control blocks on the deformation and the maximum pressure in the hydraulic system.
|
|
| |
|
|
Positioning board for a pallet
Zábojník, Petr ; Malášek, Jiří (referee) ; Kašpárek, Jaroslav (advisor)
This bachelor's thesis deals with the design of static placement table for lifting loaded EUR palettes. Load capacity of the manipulator should be at least 1500 kg and lift height from the zero position at least 700 mm. Furthermore it should be possible to switch between electrical and hydraulic drive. This thesis consists of two parts, technical report and drawing documentation.
|
|
|
Lifting roller table
Korytář, Jan ; Malášek, Jiří (referee) ; Kašpárek, Jaroslav (advisor)
This thesis deals with the current lifting devices and conceptual design of the lifting roller table, which serves as a knot on the transport line. The table is used to transport 1000 kg EUR pallets, with a 200 mm height change required. The thesis contains a brief analysis of the lifting structures, the design of the roller track, the design and strength calculations of the scissor mechanism. It also includes assembly drawings, frame subassemblies, and workshop drawings.
|
|
|
Mobile Lift Table Capacity 800 kg
Fajkus, Pavel ; Pokorný, Přemysl (referee) ; Škopán, Miroslav (advisor)
This thesis deals with design solutions and strength calculations scissor lift table with a capacity of 800kg. The report contains an overview of existing search scissor platforms, types of storage free end scissors, raising the possibility of execution, storage hydromotors, calculate the minimum power lifting, strength control pins, bending calculation of scissor arm, friction control blocks on the deformation and the maximum pressure in the hydraulic system.
|
|
|
Production line of car lock
Vincenc, Josef ; Mazal, Pavel (referee) ; Dvořáček, Jiří (advisor)
The Bachelor’s thesis deals with the part of the production line for the car lock assembly. It describes the construction of the automotive latch and its development and operation. The main part deals with the construction of the automatic punching station for labeling automotive latches. It solves three main parts of the appliance, which are a lifting table, punching and a frame. The appliance is used for industrial purposes.
|
guest ::
