|
|
Apartment Building
Nedomanský, Vojtěch ; Zichová, Barbora (referee) ; Lavický, Miloš (advisor)
The aim of the bachelor's thesis is to design and develop project documentation at the construction implementation level for an apartment building. The subject of the bachelor's thesis was the appropriate use of structural, thermal-technical, and material solutions. It is a basement four-story apartment building of irregular shape, which contains a total of 13 apartment units, with each apartment unit assigned a basement storage room located in the basement part of the building. The building is founded on strip foundations and a base slab. The vertical load-bearing system of the above-ground floors consists of Therm-type ceramic blocks with a certified contact insulation system. The vertical load-bearing system in the basement floor is made using lost formwork blocks filled with concrete. Therm-type acoustic blocks are used for the internal load-bearing walls. Monolithic reinforced concrete ceiling slabs were designed as the ceiling structure. The apartment building is roofed with a single-layer flat green roof with a constant slope, which is prepared for the placement of photovoltaic panels to utilize alternative energy sources.
|
|
|
Detached House
Šulák, Radek ; Zichová, Barbora (referee) ; Lavický, Miloš (advisor)
The main topic of this bachelor thesis is the elaboration of the detailed design documentation for a new family house in the village of Troskotovice. The aim is to design the layout of the building with almost zero energy consumption, to choose a suitable structural system and supporting system, and to solve the building's embedment in the ground. The family house is a two-storey building with an energy-efficient wall system using ceramic brick blocks. The shape of the building is U-shaped, creating an atrium in the southern part, which is the main architectural element. The ceiling structure is made of reinforced concrete. The roofing is designed with a flat double-skin roof. The work also includes a structural and physical assessment.
|
|
|
Apartment house Mája
Pacholíková, Petra ; Žajdlík, Tomáš (referee) ; Šuhajdová, Eva (advisor)
The bachelor's thesis deals with the design of a new apartment building on the outskirts of Týniště nad Orlicí. It is a four-storey apartment building with a basement. There are 14 residential units in the building, to which there is a separate cellar designed in the basement. On the ground floor, two barrier-free apartments are designed for people with reduced mobility. The floor plan is designed from two rectangles arched into each other. The building is based on foundation strips at a non-freezing depth. The vertical load-bearing structures of the above-ground floors are made of ceramic blocks, the underground floor is lined with lost formwork. The vertical load-bearing structures are finished with a reinforced concrete wall wreath. The horizontal structures between the individual floors of the apartments are designed from prestressed spiroll panels. A monolithic ceiling slab is designed in the common corridor. The building is covered with a flat single-skin roof.
|
|
|
Background of the Football Club Lučina
Kohut, Lukáš ; Šobrová, Zdena (referee) ; Utíkalová, Ivana (advisor)
This Project includes the background of the football club Lučina. The object is situated in the community center of Lučina. The house has three floors. There is a utility room, storage room, laundry facilities and rehabilitation facilities for football players (gym, sauna, jacuzzi, massage) in the basement. In the 1st floor is a locker room with showers for the players and the public buffet. In a separate part is a toilet and garage. In the 2nd floor is an apartment with terrace and facilities for the officers of club. The house is made from brick technology of ceramic blocks. The building is covered with shed roof and vegetation.
|
|
|
Apartment building
Thomajer, Viktor ; Brabec, Roman (referee) ; Brukner, Bohuslav (advisor)
The main task of bachelor’s thesis was to design an apartment building and to create the project design documentation in accordence with the law in Czech Republic. My object is an four-storey apartment building in Hradec Králové (Czech Republic). The building is consisting of one underground floor with the parking for residents and another 3 floors above the ground with the 25 apartments. Construction system of underground floor combine the elements of inner concrete columns and external walls on the foundation slab made of watertight reinforced concrete. This kind of foundation is called „white tank“ and except of load-bearing function fully provides the waterproofing solution under the ground. The rest of floors are made of ceramic blocks as the system of two-way load-bearing walls. External walls are insulated with mineral wool insulation according to ETICS. Floor slabs are designed as cast-in-place concrete structure. The roof is flat with the 2% of slope with wateproofing layer of PVC foil. All necessary utility structures are situated close to the building area and can be reach easilly. As the main source of energy for heating was designed heat exchanger system supported from hot-water sytem of city Hradec Kralové.
|
|
|
Apartment building on a sloped site
Hudec, Karel ; Bečkovská, Tereza (referee) ; Bečkovský, David (advisor)
Subject of master´s thesis is an apartment building in Uhersky Brod. Subject is designed on a sloped site in central urban area of the city. Apartments are placed on three floors above the ground level, in underground floor is situated a garage. Vertical load-bearing structures in lower floors are made of monolithic reinforced concrete, upper floors are made of ceramic blocks HELUZ. Whole building is insulated with external thermal insulation composite system. Horizontal structures are made of monolithic reinforced concrete. Roof is partly mono-pitched, partly double-pitched truss roof.
|
|
|
Family House
Slámová, Jaroslava ; Partika, Radek (referee) ; Košíčková, Ivana (advisor)
The subject of bachelor’s thesis is creation of project documentation of construction of a family house. The family house is a two-storey building, without basement. The building is founded on foundation strips, load-bearing structures are designed mainly from system Porothem, completed with reinforced concrete ceilings and timber structure of mono-pitched roof. The object is situated on parcels n.594 and 597 in municipality of Velešovice, cadastral area Velešovice, South Moravian region.
|
|
|
Winery ŠakWine
Franko, Michal ; Krupica, Roman (referee) ; Bantová, Sylva (advisor)
The aim of this diploma thesis is to elaborate the project documentation of a new-built winery, in the cadastre area of Šakvice. The building has a basement and one above-ground floor. The building has a combined structural system. On the first floor is a wine-tasting room, a conference hall, a wine shop, a showroom, and an office. The wine production and technical facilities are situated in the basement. The building is based on cast-in-place plain concrete foundation strips. Vertical loadbearing structures on the first floor are design from ceramic blocks and the vertical loadbearing structures on the basement are design from cast-in-place reinforced concrete. Horizontal loadbearing structures are designed from cast-in-place reinforced concrete. The flat roof consists of a flat roof with extensive greenery. There are twenty parking spaces on the site. The designs were developed in the AutoCAD software. All structures comply with the valid standards and regulations.
|
|
|
Microbrewery in Hodonín
Toman, Michal ; Moravcová, Eva (referee) ; Matějka, Libor (advisor)
The content of this thesis is the documentation for the project of Microbrewery in Hodonin. This microbrewery is a detached building on building plot in the urban area of Hodonin. In the building is located a microbewery with planed beer production 3500 hl per year and restaurant for 150 guest with the summer terrace planed for 35 guests. Building is a ground floor structure with cellar under the part of it. The ground floor is divided into the section for guest and a part for restaurant’s services with kitchen, storages and background for employees. In the restaurant is located a brewhouse which is a heart of the object. Microbrewery – fermenting room, lager cellar, tank cellar, boiler room, engine room for ventilation, storage of barrels and drinks are located in the basement. Bearing system is formed by walls- in the ground floor by ceramic blocks and monolithic concrete walls, in the basement by the concrete formwork blocks. The building is insulated. The roof above the kitchen and the restroom for guests is a flat roof. The roof above the restaurant consists of a wooden chest nailed trusses with a slope of 4%. As the roof covering is used a PVC foil
|
|
|
Apartment building
Křenková, Ivana ; Navrátil, Michal (referee) ; Kacálek, Petr (advisor)
The subject of the bachelor thesis is the elaboration of project documentation for a new apartment building. The proposed building is located in Rožnov pod Radhoštěm in a newly developing housing development. The apartment building is designed as not being connected to the surrounding buildings. It consists of four floors above ground and one underground floor. On the upper floors there are 10 residential units, common areas with the mechanical rooms and a garage with three parking spaces. In the basement there are cellars belonging to individual apartments. All apartments have a terrace or balcony. The building is based on monolithic foundation strips made of plain concrete. The perimeter masonry in the basement is made of permanent shuttering kits/systems, in the upper floors of ceramic blocks, which is insulated with the ETICS contact thermal insulation system. In the above-ground floors are ceiling structures made of semi-assembled ceiling blocks, in the basement monolithic reinforced concrete slabs are designed. The roofing of the building is designed as a flat single-skin roof. Part of the bachelor thesis is also a basic assessment in terms of building physics and fire safety solutions.
|
guest ::
