|
|
Mountain Hotel with Wellness
Kopečková, Kristýna ; Konečná, Petra (referee) ; Králová, Zuzana (advisor)
The subject of my thesis is the design mountain guesthouse with a wellness centre, which is located in the village of Mala Morávka, at the level of documentation for construction. The new building is located in the cadastre unit Karlov pod Pradědem. This is a two floors, slab-building L-shaped with separate parking for visitors of boarding house and wellness centre. The structural system is composed of ceramic blocks Porotherm and reinforced concrete joist floor. Roof structure is made up of wooden trusses girders saddle shape. Design of mountain guesthouse with wellness centre respects the territorial plan of the village of Malá Morávka.
|
|
|
Block of Flats
Jánská, Kamila ; Lavická, Radomila (referee) ; Lavický, Miloš (advisor)
Diploma thesis describes the design and processing of project documentation of the apartment building. The apartment building is located in the central part of the city of Brno, in the district of Štýřice. The building has 5 floors. Its basementless with flat roof and it is based on the footings of plain concrete. Load-bearing, peripheral walls and partitions are designed from ceramic blocks POROTHERM. Ceiling construction is designed to be assembled of ceramic ceiling fittings MIAKO built on POT supports. Peripheral walls of all floors are insulated with external thermal insulation composite system ETICS with thermal insulation of mineral wool. In the place of the plinth is wool replaced by XPS polystyrene. In the facade there are anchored wooden lattice constructions using ProPasiv anchors. These constructions are covered by façade cladding sheets CEMBRIT METRO and they devide whole building into separate units. There is housing and communal part of the building. On the first floor there are storage areas, the main service room, utility room and two barrier-free apartments. In the second to the fifth floor there are 9 residential units, one of which is designed as duplex apartment . All floors are connected by staircase and wheelchair lift. Parking for 17 cars is designed in front of the building . Two parking spaces are wheelchair accessible.
|
|
|
Wellness hotel "Na Ovčačce" - Svatý Kopeček u Olomouce
Spurný, Martin ; Klvaňa, Jiří (referee) ; Eliáš, Luboš (advisor)
The project is newly built wellness hotel in the cadastral Svatý Kopeček, the town of Olomouc, district Olomouc. The house is in a secluded street in Darwin. On the territory are restrictions concerning the parameters solved object. Notably the location, number of floors and the percentage of stopping. This is a three-storey, basement building with a flat roof. The building is based on the footings of plain concrete and reinforced concrete footings. Supporting, peripheral and partition walls are designed from ceramic blocks POROTHERM in the upper floors of concrete formwork and fittings in the basement. Ceiling structure is designed using locally supported reinforced concrete slabs. The entire building is divided into several sections. The 1s there is an underground garage and wellness. In 1.NP is a restaurant and facilities associated with the operation of the restaurant and hotel. In 2.NP and 3.NP are single rooms. Total capacity is 155 people and has 16 employees. To the building are three main entrances. Two of them are designed as public entrance to the restaurant and hotel. The third is the entrance for staff and supplies. Among other inputs that lead from the exterior of the building is the entrance to the restaurant terrace. Another entry is possible from the underground garage to wllnessu. The proposed facility is designed wheelchair. Before the building is designed parking for 27 cars and underground garage for 44 cars. Five of parking places are for disabled people.
|
|
|
Sports and wellness center
Libřický, Zdeněk ; Manová, Ludmila (referee) ; Maceková, Věra (advisor)
The final thesis is focused on the design and elaboration of the project documentation of the sports and relaxation center. The proposed building is located in the south-eastern part of the town of Hradec Králové, in a location supposed for buildings and areas of sports and relaxation use. It is a three-storey building with a flat roof and partial basement. The construction system is wall-mounted with a combination of skeleton. The building is based on plain concrete and reinforced concrete foundation footing. The peripheral, supporting and partition walls are designed from ceramic blocks POROTHERM. The inner load-bearing elements consist mainly of reinforced concrete columns. The ceiling structure is designed from reinforced concrete slabs supported locally. The perimeter walls of the first overground floor and part of the perimeter walls of the basement are insulated by an external contact thermal insulation system. The thermal insulation of the perimeter walls of the second floor is designed by means of a ventilated facade with facade tiles except the squash courts and the relaxation area. The building is functionally divided into three main parts, where the central part forms an entrance hall with comunication spaces of all floors. In this part a basement with technical facilities is designed. The right part of the ground floor consists of a restaurant with a bowling alley and a kitchen with storage and hygienic facilities. As part of this section, a gym and exercise rooms for fitness exercises, spinning and TRX are designed on the second floor. The left part consists of two squash courts with the appropriate facilities and massage areas. There is also a relaxing facilities with a north-facing terrace on the second floor. There are also dressing rooms and hygienic facilities. The designed object is accessible for disabled people. There is a parking lot for 40 cars, 3 motorcycles, one bus and three barracks for cars.
|
|
|
Detached house with the hairdressing saloon in Zdiby
Klečková, Tereza ; Vlach, František (referee) ; Štěpánek, Ladislav (advisor)
The bachelor thesis deals with the project of a polyfunctional detached house with hairdressing salon in Zdiby. The detached house has three above-ground floors and a partial cellarage. There are two housing units in the building, along with the hairdresser’s facility on the ground floor. The facility part is separated from the residential part and it´s operation is provided by the residents. The entrance to the family house is from the north side of the building. The building has a shape composed of rectangular parts and is covered with a single-layer flat roof. Individual rooms are located in the building so that the living rooms are situated mostly to the South, ensuring that they are sufficiently sunny. The detached house is designed from a single masonry system. The vertical constructions are made of Porotherm ceramic pieces. The Spiroll ceiling panel is used for horizontal construction. During processing, emphasis was placed on layout solutions, architectural appearance, statics requirements and safety of use.
|
|
|
Family house with a musical instrument shop in Dětkovice
Zvolský, Dalibor ; Vlach, František (referee) ; Štěpánek, Ladislav (advisor)
The Bachelor’s Thesis – Family house with a musical instrument shop in Dětkovice, has a form of project documentation which contains relevant requirements according to valid regulations. The proposed building is situated on the plot number 930/482 and 930/483 in the village Dětkovice. I tis a detached house which stands separately on a gently sloping terrain. It is a three-storey house with partial basement. It is formed from two units – a living wing with a shop and a garage with a test room. It is made of brick blocks with flat roof. The upper level attic gable is at the height of 9,980 meters. The seminar paper – composition single flat roof – is a part of the Bachelor’s Thesis.
|
|
|
Mixed-use building in Brno
Kopecký, Lukáš ; Mizerová,, Lenka (referee) ; Smolka, Radim (advisor)
This thesis describes the design and processing of project documentation multifunctional house. The multifunctional building is located in the central part of the city of Brno, in the district of Štýřice. This is a five-storey, basementless building with a flat roof on two levels. The building is based on foundations made of plain concrete. Supporting, peripheral and partition walls are designed from ceramic blocks POROTHERM. Ceiling construction is designed to be assembled of ceramic ceiling fittings MIAKO stored on POT beams. External walls of all floors are insulated using an external ETICS with thermal insulation made of mineral wool, which is replaced by XPS polystyrene used for plinth. Part of the facade is designed as ventilated, consisting of trusses of wood and sheathed by cladding panels CEMBRIT METRO. This architecturally divide the building into separate units. The building includes parts of the administrative, residential parts and parts for business purposes. On the first floor there are areas of common storage area of the apartment house, the main utility room, utility room. Furthermore, there is an administrative part, where are the reception facilities for reception, sanitary facilities for employees and office work. Part of the first floor is also a small shop with warehouse and facilities for employees. The second floor is a residential unit and the second part of the administrative unit. Third to the fifth floor is only residential and there are 6 residential units. All floors are connected by staircase and a wheelchair lift. In front of the building is designed parking lot for 20 cars. One of the parking space is wheelchair accessible.
|
|
|
Minibrewery in Vyškov
Zvolský, Dalibor ; Rozehnal, Miroslav (referee) ; Štěpánek, Ladislav (advisor)
The master’s Thesis – Minibrewery in Vyškov, has a form of project documentation which contains relevant requirements according to valid regulations. The proposed building is situated on the plot number 2123/72 in the city Vyškov. It is a detached building which stands separately on the flat terrain. It is a two-storey building with partial basement. It is formed from three units – a minibrewery, a brasserie with kitchen and an administrative part. It is made of monolithic reinforced concrete frame, brick blocks with vegetative flat roof. The upper level attic gable is at the height of 8,880 meters. The seminar paper – minibrewery in Vyškov – is a part of the Master’s Thesis.
|
|
|
The block of flats
Prchalová, Nicol ; Sedlák, Radek (referee) ; Beneš, Petr (advisor)
The subject of the bachelor's thesis is to proces a design documentation for construction of apartment building that is situated in city part Brno-Chrlice in Břestislavova street on the plot number 505/3. Apartment building is non-basement and contains 11 hoising unit. Wall construction system is built from clay block Porotherm. Ceilings are represented by cast-in-place reinforced floor slab. The buildig is covered by hipped roof. There are 10 outdoor parking spaces near the building.
|
|
|
The villahouse in Polička
Svoboda, Jan ; Kozáček, Martin (referee) ; Brukner, Bohuslav (advisor)
This bachelor thesis deals with the processing of project documentation for a new building called VillaHouse. The building is located in the southeastern part of the City of Polička. This is a three-story apartment building with a flat roof. The building has main and side entrances. The main entrance to the building is wheelchair accessible. The first floor has been designed with storage areas as well as a staircase and vestibule. The second and third floors are designed with 6 separate apartments. The apartments are of different size categories (2 + 1, 3 + 1, 1 + kc, 2 + kc and 2 x 3 + kc). The building has sheltered parking for 6 cars. The footings of the building are made of plain concrete. The supporting and perimeter walls are made from ceramic blocks. The ceiling constructions are made of prestressed reinforced concrete panels SPIROLL. The external walls are insulated with contact insulation ETICS.
|
guest ::
