|
| |
|
|
Relationship between morphometric characteristics of the terrain and network analysis in GIS
Kufner, Jan ; Hudeček, Tomáš (advisor) ; Štych, Přemysl (referee)
The main objective of the diploma thesis is creation of methodology and automatization of calibration process of network graph based on the values of morphometric characteristics and motion vectors. The resulting morphometric values of the terrain have been detected on the basis of mathematical and cartographic methods for line course expression. The most accurate one has been used in GIS network analysis over the road network and digital terrain models, which were chosen as the most appropriate for this purpose. Relationship between morphometric values and values suitable for use in network analysis (speed, time, ...) has been studied using specific examples in appropriately selected territory with using selected vehicle, which was designated as a bicycle. The practical part for the verification of functionality of the suggested methodology has been compared with other models of accessibility, available web-map portals and route planners. The process of transport network evaluation based on selected parameters has been automated in Python programming language as a tool in ArcGIS software, which is attached to the diploma thesis. Powered by TCPDF (www.tcpdf.org)
|
|
|
Polygonal Mesh Segmentation
Povolný, Filip ; Polok, Lukáš (referee) ; Španěl, Michal (advisor)
This bachelor's thesis deals with methods of polygonal mesh segmentation. The method which was chosen for implementation is based on existing methods of segmentation driven by Gaussian curvature and feature-sensitive segmentation. The chosen method is further extended, tested and finally its results are compared with results of other automatic segmentations and with manually segmented meshes.
|
|
|
Tooth Clasification on Jaw 3D Polygonal Model
Hulík, Rostislav ; Španěl, Michal (referee) ; Kršek, Přemysl (advisor)
This document discusses a solution for tooth classification on 3D jaw polygonal model. Sequentially, I describe techniques for representation and browsing of polygonal model saved in computer memory, techniques for dental curve detection and finally, creation of surface representing approximated tooth plane. After it, I analyze possibilities of height map creation from jaw model which helps in tooth classification in the scope of entire dental curve context and, as a last step, final detection of these teeth in two dimensions. In the same time, I discuss 3D polygonal model segmentation for border extraction, which separates teeth from the rest of the model. In the end of proposed algorithm, I join these two runs into one final detection and classification process of separate teeth, so presented application can automatically indentify and classify teeth to corresponding names and positions with a minimum user interaction. In a second half of this document, I describe implemented solution. According to primary goal, I propose these techniques forcefully to multiplatform approach and maximal user comfort.
|
|
|
3D Triangles Polygonal Mesh Conversion on 3D Spline Surfaces
Jahn, Zdeněk ; Šiler, Ondřej (referee) ; Kršek, Přemysl (advisor)
In computer graphics we can handle unstructured triangular 3D meshes which are not too usable for processing through their irregularity. In these situations it occurs need of conversion that 3D mesh to more suitable representation. Some kind of 3D spline surface can be proper alternative because it institutes regularity in the form of control points grid and that's why it is more suitable for next processing. During conversion, which is described in this thesis, quadrilateral 3D mesh is constructed at first. This mesh has regular structure but mainly the structure corresponds to structure of control points grid of resulting 3D spline surface. Created quadrilateral 3D mesh can be saved and consequently used in specific modeling applications for T-spline surface creation.
|
|
|
Tooth Detection on Jaw 3D Computer Polygonal Model
Hulík, Rostislav ; Španěl, Michal (referee) ; Kršek, Přemysl (advisor)
This document discusses a concept and implementation of algorithms for teeth detection on 3D polygonal jaw model. At first, I describe possible shape detection techniques on three dimensional computer model, including utilization just in my case. After it, I analyze filtration problems of obtained model segments in order to reliably separate regions of tooth-arch from the rest of jaw. I included all these pieces of knowledge into a final application. Here, it is possible to choose from two user interfaces, first, classic user interface which demonstrates possible utilization in real world and second, testing interface which demonstrates functions of each detection and filtration method used in program and their effect on detection. Application is written in C++ language in development environment of MS Visual Studio 2005 and compiled with MS VS internal compiler. Tested was under MS Windows XP and MS Windows Vista OS.
|
|
|
EFFECT OF FLOW PARAMETERS OF WATER AND AIR ATOMIZED SPRAYS ON COOLING INTENSITY OF HOT SURFACES
Boháček, Jan ; Střasák,, Pavel (referee) ; Rudolf, Pavel (referee) ; Horský, Jaroslav (advisor)
Práce komplexně popisuje vodní a vodovzdušné chlazení pomocí metod CFD (Computational Fluid Dynamics) konkrétně s využitím software ANSYS FLUENT. Skládá se ze dvou hlavních částí, z nichž první se zabývá numerickým popisem jediné vodní kapky a druhá popisem směsí kapek představující paprsek válcové a ploché trysky. Je založena převážně na vícefázových modelech proudění a vlastních uživatelsky definovaných funkcí (User Defined Functions, UDF) představujících stěžejní část práce. Uvedené výpočtové modely jsou ve většině případů verifikovány pomocí experimentálních dat nebo jiných numerických modelů. V první části práce jsou teoreticky postupně rozebrány všechny tři použité vícefázové modely proudění. První z nich, Volume Of Fluid model (VOF), byl použit pro modelování jediné kapky (mikromodel). Zatímco zbývající dva, Euler-Euler model a Euler-Lagrange model, byly aplikovány v modelu celého paprsku trysky (makromodel). Mikromodel popisuje dynamiku volného pádu vodní kapky. Pro malé průměry kapek (~100µm) standardní model povrchového napětí (Continuum Surface Force, CSF) způsoboval tzv. parazitní proudy. Z toho důvodu je v práci rozebrána problematika výpočtu normál, křivostí volných povrchů a povrchového napětí jako zdroje objemových sil v pohybových rovnicích. Makromodel se zabývá studiem dynamiky celého paprsku tj. oblastí od ústí trysky po dopad na horký povrch, bere v úvahu kompletní geometrii, tzn. např. podpůrné válečky, bramu, spodní část krystalizátoru apod. V práci je rozebrána 2D simulace dopadu paprsku válcové trysky pomocí VOF modelu Euler-Lagrange modelu na horký povrch. Pro případ s VOF modelem byl navržen model blánového varu. Euler-Euler model a Euler-Lagrange model byly využity pro simulaci paprsku ploché trysky horizontálně ostřikující horkou bramu přímo pod krystalizátorem nad první řadou válečků. Pro Euler-Euler model byl navržen model sekundárního rozpadu paprsku založený na teorii nejstabilnější vlnové délky (Blob jet model). Jelikož diskrétní Lagrangeovy částice tvořily v určitých místech spíše kontinuální fázi, byl navržen a otestován model pro konverzi těchto částic do VOF.
|
|
|
Computational simulation of cross-roll leveling of rods
Benešovský, Marek ; Vrbka, Jan (referee) ; Petruška, Jindřich (advisor)
Final thesis describes two variants of computational models to simulate cross-roll leveling of rods, which are based on the Lagrangian approach to describe the continuum. Implementation of both variants was performed in ANSYS software, and their main difference lies in the choice of the type of elements for the discretization. An integral part of this thesis is the description of the principle, which is an evaluation of the curvature of the rod after completion of the simulation leveling. In the other part of the work are presented the results, which are then compared with realized experiment and simulation algorithm for cross-roll leveling based on the Euler approach. The final part is dedicated to the optimal settings of the leveller.
|
|
|
Computational analysis of cross roll straightening of rods
Štourač, Vít ; Šebek, František (referee) ; Petruška, Jindřich (advisor)
Today is on products from the perspective of quality placed an increasing emphasis. This work is focused to the analyze of cross roll straghtening of long semifinished products with a circular cross-section. This process increased quality of semifinished products from the perspective of their curvature, because they do not reach the required limit values. Curvature of the semifinished product is due to residual stress, which is during straghtening using plastic deformation of the material redistributed and the semifinished product is leveled. This work analyzes the effect of rotation of straightening rolls on the distributiom of contact pressure between the straightening semifinished product and the roll of straightener. Author then analyzes effect of input parameters of program to straightening at the final curvature of the semifinished product. With the experience gained, then try to adjust some input parameters.
|
|
|
Design of simple engineering structure
Macková, Lucie ; Navrátil,, Jaroslav (referee) ; Klusáček, Ladislav (advisor)
Bachelor’s thesis processes methodology of calculating the deflection according to norm EN 1992-1. First of all it deals with the theory necessary to understand the whole process and explanation of each step. Next learned lessons are applied in the model calculation of deflections, which is performed at 3 beam elements of different construction heights. The resulting values are compared to point out changes in the final deflection according to different dimensions of the structure.
|
guest ::
