|
|
Family house, Šenov u Nového Jičína
Kleinová, Eva ; Matějka, Libor (referee) ; Müller, Jan (advisor)
This bachelor´ s thesis focuses on the development of documentation of a family house in Šenov u Nového Jičína. The project as well as the addenda are elaborated according to the contemporary legislature and standards. The house is located on the plot number 1824/19 in Šenov u Nového Jičina area. This object is two-floored and it has slab-on-ground.On the first floor there is a living room, a kitchen, a guest room, a bathroom, a laundry room, a storage room and a garage. In the second aboveground floor ther is an office, a bedroom, a bathroom, two children´ s bedrooms and a children's bathroom. The floor plan of the house is broken with the flat roof. The bearing walls are constructed of sand-lime brick. Perimeter walls are provided with a contact system.
|
|
|
Verification of multi-layer insulation in simulated space environment
Čapka, Filip ; Mašek, Jakub (referee) ; Lazar, Václav (advisor)
První část této práce se zaměřuje na popis momentálně používaných metod termo-regulace u vesmírných plavidel. Zaměřuje se konkrétně na vícevrstvou izolaci zvanou MLI. Která je jednou z hlavních pasivních forem kontroly teploty. Popisuje materiály používané na MLI a dále uvádí problémy, které nastávají při jejím používání a výrobě. V druhé části je poté popsán navrhnutý experiment, který má ověřit funkčnost MLI jako izolaci proti tepelným ztrátám. Na konci jsou shrnuty výsledky tohoto experimentu
|
|
|
Familly house in Novém Městě nad Metají
Sháněl, Tomáš ; Burdová, Jana (referee) ; Brukner, Bohuslav (advisor)
The project addresses the low energy new build detached house, which will be permanently used for housing. The building is designed as a two-storey house, which is intended to be permanent residents of 4-5 persons. Roofed building with a flat roof is solved by using a bottom discharge reinforced concrete slabs. Load-bearing walls are from Sendvix manufacturer KM - BETA. The ceilings are designed as monolithic. The building is located in the gap between the existing building houses. The house has a garage for one car.
|
|
|
Assessment of investment in heating house
Adam, Jakub ; Lisý, Martin (referee) ; Baláš, Marek (advisor)
This Bachelor’s Thesis is engaged in an assessment of investments into a family house heating system. The first part describes a model house chosen for this work. Further, it states a method of the calculation of the peripheral wall and void filling heat loss. The values are then used to determine the heat output. The work recommends the use of different insulation materials and options for void filling replacement to comply with the requirements for obtaining a grant. According to the calculated heat output, it suggests a choice of more effective and ecological sources for heating, which could replace the current source.In the conclusion of this work, the results are graphically processed and evaluated according to the estimated return of investments within several years.
|
|
|
Plasmid DNA interactions with lanthanoide compounds
Gőghová, Sabína ; Španová, Alena (referee) ; Rittich, Bohuslav (advisor)
In the theoretical part of bachelor thesis, literature was summarised on the isolation and purification of plasmid DNA, the application of lanthanides as non enzymatic nucleases and practical importance of lanthanide compounds in medicine. In the experimental part of the thesis, plasmid DNA pUC19 was isolated by the method of alkaline lysis. Isolated plasmid DNA was cleaved by neodymium trichloride at 70 °C in different intervals. Gel electrophoresis was used for evaluation of experiments.
|
|
|
Preparation and realization of the railway viaduct in Ostrov nad Oslavou
Šťastný, Jiří ; Doubek, Rostislav (referee) ; Kantová, Radka (advisor)
This Diploma thesis deals with the preparation of the realization of the railway viaduct in Ostrov nad Oslavou. Realization of major technological stages is addressed in building technological study. Technological processes of each sub-job phases are supplemented by technical regulations, the design of the main building machines and mechanisms, inspection and test plan, schedule of occupational health and safety, time and financial plan construction, construction budget, a plan for securing material resources. I also worked out the technical report of the building sites facilities including drawings needed. I also worked out design rehabilitation of the substructure of the railway viaduct, which is consist of technical regulations for remediation work and drawings.
|
|
|
Design of manipulator for hemp insulating mat stacking
Kočiš, Petr ; Drlík, Michal (referee) ; Blecha, Petr (advisor)
Bachelor's thesis deals design of manipulator for hemp insulating mat stacking. It defines a field of aplication of an equipment and deals with a design solution versions. It also deals with a structure of chosen version and a calculation. The calculation is devided into a preliminary calculation, a kinematics analysis, a static analysis and a control calculation. Safety- checking of elements due to limit state flexibility is a result of a control calculation. An economic analysis follows after it. It concerns calculating the cost of materials, normalized components, modular components and other components.
|
|
|
Proposal of rehabilitation of hot water network
Lžičař, Jakub ; Voltr, Aleš (referee) ; Raclavský, Jaroslav (advisor)
The bachelor thesis deals with hot water recirculation systems. It is mainly focused on the malfunctions that appear in the system. Firstly, the text elaborates general information about hot water recirculation systems, hot water distribution and its parts. The next part of the thesis describes materials used in hot water recirculation systems. Then the text deals with the malfunctions of hot water recirculation systems, design and assembly of the pipes. These chapters are followed by the case study. The case study helps to imagine the way of possible future reconstruction. The time schedule of the realization was attached to the bachelor thesis.
|
|
|
Multifunctional building in Uherské Hradiště
Maňásková, Kristýna ; Vlček, Karel (referee) ; Vlček, Milan (advisor)
The subject of diploma thesis is the construction of technical project documentation for building realization - Multifunctional building in the town of. The object has three floors with residential attic and basement garage. The land is in the city center Uherské Hradiště and This is a building in the vacant space between existing objects. Construction is rectangular in shape, roofed with a gable roof and is designed from traditional building materials.
|
|
|
Detached House
Kropáč, Petr ; Smolík, Jindřich (referee) ; Winklerová, Jitka (advisor)
Bachelor thesis deals with drafting project documentation for the new family house Troubelice. Family house is detached and is located in the cadastral Troubelice. The house is located in a new area of the village designated for houses. This is a partial basement building, which has two floors. The building has a rectangular shape and has a flat mono-layer roof with attic gable. House is designed for one family of 4 members. The basement serves as technical facilities and storage areas. The first floor serves mainly as a social part of the house. In the first floor is a garage. The second floor serves as a a quiet zone and there is a balcony. It is a brick construction system. The drawing part is processed in AutoCAD.
|
guest ::
