|
|
Wooden House
Munzar, Daniel ; Dohnal, Jakub (referee) ; Lavický, Miloš (advisor)
The subject of my bachelor thesis is design of wooden family house. Building is designed as a single family house for family of four. The building is set into the sloping terrain and consists of two floors. One floor is partially under the terrain and is designed with the permanent shuttering DEK and with the Porotherm brick blocks. Ceiling above this floor is designed with the Porotherm ceiling system. Second floor is designed as a wooden house with the Novatop system. Ceiling above this floor is designed with the Novatop system. Vertical bearing structures are designed with contact insulation system. Roofis designed as a hipped roof with wooden truss girders. The drawings were processed in a computer program ArchiCad.
|
|
|
Dwelling house Kociánka
Zelenka, Tomáš ; Kalánek, Jiří (referee) ; Ostrý, Milan (advisor)
The subject of the bachelor thesis is the design of an apartment house with eight flats standing alone on the plot, which is situated in the brno-sadová district. The building is five-storey, with one underground floor with garages and four above-ground floors. The vertical load-bearing structures are sand-lime masonry fitted with a contact heating system. The object is based on CFA piled and base plate relative to the subsoil type. Roofing is then solved by a double-skinned flat roof with a ventilated air gap
|
|
|
Apartment Building in Sadova
Pastorková, Michaela ; Nespěšný, Ondřej (referee) ; Pěnčík, Jan (advisor)
The subject of the bachelor's thesis is the elaboration of project documentation for the construction of an apartment building. The building is located in the cadastral unit of Sadová, Brna town. The apartment building has four floors, a full basement with a flat green roof. On the upper floor there are 14 residential units and in the basement there is a common room, a bicycle shed / carriage house and a cellar. The construction of the building is a wall system. Perimeter basement walls are made of reinforced concrete. The load-bearing masonry in the above-ground floors is made of YTONG aerated concrete blocks, the non-load-bearing masonry consists of Silka acoustic lime-sand blocks. The building is designed to be insulated with an ETICS contact facade made of Multipor mineral thermal insulation boards. The ceiling structure is designed as a reinforced concrete ceiling slab. The staircase is also designed as a reinforced concrete monolithic structure. The roof of the building consists of a green flat roof Urbanscape.
|
|
|
Revitalization of multifunctional house in Uhersky Brod
Žajdlík, Tomáš ; Šuhajdová, Eva (referee) ; Šuhajda, Karel (advisor)
The subject of this diploma thesis is the elaboration of the revitalization of a multifunctional building in Uherský Brod. The assignment was the elaboration of the project documentation for the issue of the building permit. This building has four floors and one basement. The supporting system of the building is reinforced concrete frame with brickwork. Ceiling structures are from reinforced concrete primary and secondary beams with slabs. Roofs of the building are designed as pitched roof, warm flat roof and double–skinned roof.
|
|
|
Apartment house Vyškov
Buršíková, Petra ; Pilný, Ondřej (referee) ; Sedláková, Markéta (advisor)
The aim of the bachelor’s work is composition of project documentation for the constrution building of apartment building. Object is situated on the cadastral area of town Vyškov, number of builing plot is 3088/1, 3088/4, 3088/11, 3088/12 a 3088/13. Terain is sloping. In the apartment building there are 3 above-ground floor and 1 belowground floor. In the below-groun floor there are situated garrage standing, storage spaces and technical spaces. In the above-ground floor there are situated flats. Structural system of this builing is wall system. External wall be composed of vertically performe block Vapis. Object have a external contact thermal insulation Etics, fasade is made of mineral fiber – insulated of stone. The ceiling construction is made of prefabricated Spiroll panels. Staircase are made of reinforced monolithic concrete slab. Roofing of objekt is composed of single-layer flat roof. Floor construction are designed as floating floor.
|
|
|
Detached house on a sloupe
Vincenc, Lukáš ; Vaněk, Vojtěch (referee) ; Utíkalová, Ivana (advisor)
The subject of this bachelor thesis is design documentation for construction of family house. House is designed for permanent housing for family of four members. The building has one above-ground and one underground floor, which is set into the slope. The plan of the house is T-shaped. Vertical circumferential and supporting constructions are designed according to Porotherm system and are equipped by contact thermal insulation system. Horizontal load-bearing structures are made of reinforced concrete. Roof construction of the object is composed by shaped roof.
|
|
|
Detached house on a slope
Šalda, Erik ; Vaněk, Vojtěch (referee) ; Utíkalová, Ivana (advisor)
Bachelor´s thesis encompasses project documentation for realization of new detached house above-standart. The new building is situated in Brno, city part Žabovřesky, in a newly built location. Detached house is designed as a free-standing building with two above-ground and one underground floor on a slope. The new building is projected as a permanent housing for a five member family. The plan of the building is an irregular shape, resembling letter L. Detached house is based on plain concrete strip foundations. Vertical load-bearing structures of the above-ground are made of pottery breeze block, underground vertical constructions are made of structural formwork. The horizontal construction system is made of reinforced concrete monolithic structure. The roof is flat, partly walkable. The building is thermal insulated with mineral cotton wool.
|
|
|
Detached house with a workshop
Tesař, Ondřej ; Navrátil, Michal (referee) ; Petříček, Tomáš (advisor)
The aim of bachelor´s thesis is to elaborate the project documentation for realization of new detached house with a workshop. The new building is situated on the edge of the built-up area of the town Velké Pavlovice in the Břeclav district. It is a two-storey, basement and free-standing building. The building is divided into two functional parts, a living area and a design office. The detached house is designed for permanent housing for a five member family. The plan of the building is irregular shape, resembling an inverted letter L. The detached house is based on plain concrete strip foundations. The vertical load-bearing structures in the basement are made of reinforced concrete monolithic structure. The above-ground part of the building is masonry. The horizontal construction systém is made of reinforced concrete monolithic structure. The building covering constructions are designed as non-walkable, vegetation and walkable flat roofs. The building is thermal insulated with a ventilated facade partly with timber cladding.
|
|
|
Apartment Building in Sadova
Pastorková, Michaela ; Nespěšný, Ondřej (referee) ; Pěnčík, Jan (advisor)
The subject of the bachelor's thesis is the elaboration of project documentation for the construction of an apartment building. The building is located in the cadastral unit of Sadová, Brna town. The apartment building has four floors, a full basement with a flat green roof. On the upper floor there are 14 residential units and in the basement there is a common room, a bicycle shed / carriage house and a cellar. The construction of the building is a wall system. Perimeter basement walls are made of reinforced concrete. The load-bearing masonry in the above-ground floors is made of YTONG aerated concrete blocks, the non-load-bearing masonry consists of Silka acoustic lime-sand blocks. The building is designed to be insulated with an ETICS contact facade made of Multipor mineral thermal insulation boards. The ceiling structure is designed as a reinforced concrete ceiling slab. The staircase is also designed as a reinforced concrete monolithic structure. The roof of the building consists of a green flat roof Urbanscape.
|
|
|
Multifunctional house on the Francouzská street in Brno
Vrtílek, Osvald ; Krejsová, Aneta (referee) ; Májek, Jan (advisor) ; Kolář, Radim (advisor)
The Bachelor's Thesis is based on the architectural study completed during the second year of the bachelor's studies. Its aim was to design an apartment building with second use by my choice. My design contains lucrative, multifunctional office space - it is situated on the second and the third floors, which are connected to each other by seperate saircase and by office space with a clearance going through both floors. On the other floors there are two separated dwelling units. The first one contains two bedrooms and a spacious common room. Second apartment is maisonette. It has three bedrooms and overal it desposes with more spacious rooms. Both apartments has a cellar in a basement. The building is located in the centre of Brno on the Francouzská street, which connects with Milady Horákové street. Currently there is a single-storey building, that replaced a former apartment building. Because of that, there became a gap site between other multi-storey buildings. The design tries to keep the principles of surrounding buildings by its form. This is guaranteed by the external spaces of each flat and by following the frontage line – the building reacts to it by its form from the street and form garden as well.
|
guest ::
