|
|
City Library of Přerov
Odstrčilík, Viktor ; Javůrek, Radim (referee) ; Mikulášek, David (advisor)
The project is solving problem with Library in Prerov and its location on the site and connection to existing infrastructure. The project can be divided into three parts - urban solutions, architectural design and technical solutions. Urban solutions The area is currently degraded by uncontrolled parking of cars and too much communication. This causes confusion functioning of transport and pedestrians weaving between cars. Vegetation is devastated. Influencing factor is the close proximity to the City Circle, whose importance will increase, if realized "shortcut" towards the main railway and bus station. The proposal aims to improve respectively. build high-quality public space. The library building is defined as a solitaire, a reaction to the complicated and urban neighborhood. Its placed on the Conner for puting there some object of interrest. Communications are in the area reduced. Towards the north west corner of the square is placed park. The composition of park is as organic as a library. Architectural design The shape of the building based on the urban situation and the requirements to define solitary building. First shape was circle that was formed into the shape of an ellipse.Outer shell is made from glass up to ensure connected with outdoor space. Horizontal structure is dividet into two sections. The first floor is public place with cofe etc. The rest of floor space is used for administration and supply. The second floor is only for memebers of library. There is situated all books, study places and storages for books. Library has three departments. Department for adults, department for children and music department. The technical solution The basis of construction of the building are reinforced concrete columns with „extendet head“. These are placed on the base plate with the pilots.
|
|
|
Architectural study of the sacral object Brno - Líšeň
Hrubjaková, Petra ; Marek, Jiří (referee) ; Šindlar, Jiljí (advisor)
By entering the diploma thesis is to create an architectural study of the sacral object and the Salesian community center in Brno - Líšeň. The first mention of the creating church appeared in 1987 and because of this reason Salesians came to this city, they focus on working with children and youth, according to Don Bosca. Their method od education was reflected in the overall project concept. The building will be linked to the existing object of the Salesian Youth Center, but it will also serve for a wider circle of believers. The consecration of the church will be a third divine person - the Holy Spirit. The object will be on the Horníková ulica, on the parcels no. 5037/30,32. On the plot with parc. No.5037/32 is currently a building, that is the property of the Nadácia pre radosť, and it will by removed during construction. The proposal is based on urban analyzes performed and responds to the surrounding buildings. It also affects the conditions of the building plot and uses terrain sloping. The proposal consists of one object that includes a church with a capacity for 400 seat and 100-standing persons with chorus, sacristy, adoration chapel and technical and hygienic backgrounds. Furthermore, there is a educational/multifunction room, workshop and store of religious products, farther the parish part with the apartments, office for priests and underground garage. In addition to the building, there was created paved areas for pedestrian which responding to existing communications. Due to the removal of the parking lot in the northern part of the solved territory, the existing parking lot was extended on the south side and there was also created a new communication for cars, which connects the Northern Street Horníková with Western. In this communication, it is necessary to create a suitable road signage to prevent the supply of vehicles and it must not be used as an abbreviation in the traffic jam at the 2nd grade road communication.
|
|
|
Steel structure of botanical pavilion
Ducheček, Jan ; Barnat,, Jan (referee) ; Röder, Václav (advisor)
Work called Supporting curved construction of botanical pavilon is developed as realization documentation. The building is situated in an area with low vegetation, where the hight of sorrounding buildings do not exceed 5 metres. Construction of a triaxial ellipsoid shape has a layout dimensions of 42,5 x 30 m and 7,3 m surge. Roof cladding is made from textile sheets from PTFE fibers, which are anchored to the trusses. The translucent textile sheets are used to achieve optimum conditions for plants that are grow inside. The supporting construction is made of glued laminated beams, which are tilted by 45 degrees and alternately fit together. Emphasis is placed on visual design of construction.
|
|
|
Non-Euclidian Geometries in Computer Games
Jůda, Štěpán ; Hůlka, Tomáš (referee) ; Dobrovský, Ladislav (advisor)
The work deals with the origin and description of non-Euclidean geometry and its division into hyperbolic and elliptic non-Euclidean geometry. It also discusses the behavior of geometric elements from Euclidean geometry in non-Euclidean geometries. Another subject of this work is the classification of computer games that use non-Euclidean geometry. The last point is the process of creating my own computer game.
|
|
|
ART & ARCHITECTURE - Community Entertainment Facility in South Centre, Brno ("FIESTA" Concert and Dance Hall )
Korábová, Nikola ; Todorov, Petr (referee) ; Pelčák, Petr (advisor)
Within the plans on redevelopment of Brno south centre a linear green park is envisaged with a piece of land designated for a major cultural venue as defined in the masterplan. Fiesta Centre for music and dance is a diploma project engaged in the theme of a city-wide cultural venue. It has been designed in a compact form with an elliptical layout so as to make up with the difficulties of the site. The building’s facade has a strong arched structure setting up a landmark in the park. The park is integral to the design. The auditorium provides with 970 seats and the stage is fitted with an elevating device to maximize the flexibility of the performance. Design includes foyers and the other visitors facilities, necessary staff and delivery background. 200 parking plots are placed in the underground.
|
|
|
Stress analysis of jet grouted shafts
Tarbajová, Mária ; Račanský, Václav (referee) ; Chalmovský, Juraj (advisor)
The subject of the diploma thesis is the stress analysis of the circular and elliptical shaft from material jet grouting. A new advanced constitutive Shotcrete model will be applied on the material jet grouting. In the thesis, the shaft tensile strength factor and the size of the ground pressures will be primarily examined. The practical part of the diploma thesis is completed by the comparison of the analytical and numerical calculation of the normal force of the circular and elliptical shafts.
|
|
|
Spiritual brownfield Olomouc - Zlín
Greguška, Peter ; Nový, Jindřich (referee) ; Štěpán, Marek (advisor) ; Nový, Alois (advisor)
The diploma thesis is the proposal of the pilgrimage church with the addition of the second functional unit as the pilgrimage area near to the stream „Svatá voda – Kaménka“. The proposal claims to raise former pilgrimage area and natural element, and also to provide spiritual and psychological support to pilgrims/visitors. For that reason, there are provided residential programs in the area. The building program corresponds to demanding enter and capacity. Capacity of the church is up to 250 people, in the main liturgical space on the ground floor. The growth is possible on the gallery on the second and third floor. Areal also including restaurant, lecture hall and spiritual centre. That works on a spiritual stay program for singles or couples. There is also a meditation garden and parking lot aloof.
|
|
|
Ovality measurement of extruded fiber using three cameras
Loučka, Pavel ; Martišek, Dalibor (referee) ; Štarha, Pavel (advisor)
One of the important parameters observed during extruded fibre fabrication is its diameter. The diameter can be measured with a single scanning camera assuming that the fibre section has a circular shape. As proved in practice, another important parameter is ovality, that is the rate of fibre flattening. This paper assumes that the fibre section shape is elliptical. In such a case, at least three different views on examined fibre are needed. Mathematical part of this paper is concerned with analytical description of fibre ovality measurement using two different approaches based on the knowledge of linear algebra, projective geometry and conic sections theory. Main goal of this paper is thus to use both mathematical theory and image analysis methods for ovality and diameter determination. Precise calcluation of such quantities is, however, conditioned on precise camera system calibration, which is described in the paper as well. Additionally, the work contains a brief mention of technical realization of ovality measurement and its possible difficulties.
|
|
|
Extruded fibers ovality measurement
Loučka, Pavel ; Procházková, Jana (referee) ; Štarha, Pavel (advisor)
One of the important parameters observed during extruded fibre fabrication is its diameter. The diameter can be measured with a single scanning camera assuming that the fibre section has a circular shape. As proved in practice, another important parameter is ovality, that is the rate of fibre flattening. This paper assumes that the fibre section shape is elliptical. In such a case, at least three different views on examined fibre are needed. This paper deals with analytical description of fibre ovality measurement using two different approaches based on the principles of linear algebra and projective geometry. As a result, a considerable part of the work is devoted to these branches of mathematics with particular regard to analytical conics theory. Additionally, the work contains a brief mention of technical realization of ovality measurement and its possible difficulties.
|
|
|
Auto center VW Mikulov
Kováčik, Branislav ; Bílek, Zdeněk (referee) ; Dýr, Petr (advisor)
The aim of this bachelor's thesis was to create documentation for a building permit and documentation for the construction of a building, the basic compositional and architectural design of which is based on a previously processed architectural study within the subject AG033 - Atelier of production buildings. This is a design project of the Volkswagen Group Autocentre in Mikulov. The specified land intended for development is located in the westernmost part of the town of Mikulov in the cadastral territory of the town of Mikulov, it is an industrial zone of the town. The surrounding buildings are largely made up of low-rise large-scale buildings, production halls, storage facilities or agricultural buildings and their accessories. Within the zoning plan, the area adjacent from the south side to Jiráskova Street is listed as a brownfield. The shape of the land predetermines the proposed construction of the longitudinal shape of a deep character, as the land is stretched in the north - south direction and has the shape of a gradually narrowing trapezoid. The terrain is slightly sloping and descends to the south. From the south side, a wastewater treatment plant is adjacent to the solved area. The bachelor's thesis also deals with the solution of the external modifications of the area, including transport infrastructure, stratification and the number of parking spaces. An essential part is also the distribution and character of the upper and lower greenery, the location and shape of the areas intended for demonstration vehicles. Last but not least, the work deals with the solution of engineering networks within the technical equipment of buildings and technical infrastructure, management of waste, etc. The proposed building respects the floor plan delimitation of the land, primarily by maintaining the parallelism of the perimeter walls with these boundaries. The central element of the mass composition is an extravagantly designed ellipse used as the main exhibition space, opened by a large-area rounded glazing into the entrance area of the exterior. The remaining masses of the building are formed by blocks of different height levels, which achieves the compositional principle of gradation. The completely monotonous mass of the production hall is broken in each field by a massive skylight encircling the building along the entire perimeter of its section. The building has premises for warehousing, administrative activities, exhibition premises, technical facilities and premises belonging to professional workplaces of car mechanics. All material segments of the building are interconnected by internal passages. The whole building has a purely industrial character, which is based on the character and purpose of use of the building and has a connection with the automotive industry. The main materials used in the construction of this building are structural steel, concrete and thermal insulation perimeter panels. The façade emphasizes the essence of the ellipse, which is largely-glazed, while the storage and production areas are hidden in the rear and their visual layer is formed by sheet metal in gray, respectively. white color.
|
guest ::
