|
|
Energy balance in wastewater treatment plants
Novotný, Jan ; Raclavský, Jaroslav (referee) ; Hluštík, Petr (advisor)
This masters thesis is dealing with energetic evaluation of selected municipal WWTP – WWTP Polička. First chapter, introduction explains basic terms and goals of thesis. Second chapter explains energy audit, energy audit process its scope and contents. Third chapter deals with assesing life cycle using LCA (life cycle assesment). Fourth chapter deal with energy consumption at WWTP in Czech Republic as well as in the world. Fifth chapter describes technology of WWTP Polička and its fundamental objects. Sixth chapter is assesment of WWTP Polička from hydraulic point of view and assesment of selected machinery. Further there is summation of capital and operational costs followed by capital investment return.
|
|
|
Proposal of topology of piezoceramic composite sensor
Dostal, Vojtěch ; Ševeček, Oldřich (referee) ; Majer, Zdeněk (advisor)
This master thesis deals with design and numerical modelling of piezoceramic sensor, which is placed on a rail, in order to generate electrical energy, which can be used for wireless monitoring of railway traffic and to monitor the condition of the railway. The thesis is divided into three parts. Theoretically background of piezoelectric energy harvesting is described in first part, where some previous application of piezoelectric generator in railway area are shown. In the second part, parametric analysis of numerical model is performed, which directly leads to finding best location on a rail, where piezoelectric generator should be placed. For this analysis the homogenized model of MFC sensor was used. Results of the numerical model were then compared with the results of the conducted experiment. The third part presented own design of piezoceramic sensor, which is placed onto most suitable location on a rail. Results from numerical analysis shown eligibility of using piezoceramic sensor to monitor the railway traffic.
|
|
|
Design of all-terrain vehicle
Brostíková, Amálie ; Karásek, David (referee) ; Rubínová, Dana (advisor)
This diploma thesis deals with design Quads. Specifically, a type of terrain utility quad, often referred to as the ATV. To drive the machine uses two electric motors. The ultimate designer's proposal responds to the significant social trends that support the economy and ecological design. These parameters together with the yield of the machines are non-traditional solutions to this type of field machinery.
|
|
|
Automotive Alternator Innovation
Volek, Martin ; Hýsek, Roman (referee) ; Hájek, Vítězslav (advisor)
The work deals with the analytical electromagnetic design of automotive claw-pole alternator 14V/120A. This design is verified in program Maxwell with a RMxprt tool. The results of both calculations are compared. Designed alternator is also compared with the results measured in the laboratory on the alternators of similar type. Furthermore, there are analyzed individual power losses of machine and listed options of reducing these losses, which results in an increase in overall efficiency.
|
|
|
Stabilized operation of the 400 kV power line
Jurča, Ondřej ; Bok, Jaromír (referee) ; Blažek, Vladimír (advisor)
This thesis deals with methods of solving lines under voltage levels of a very high transmission voltage and extra high voltage. The first, theoretical part of this paper analyses different methods how such lines are solved. In particular, an accurate solution is provided simulated by means of a line with evenly distributed parameters, and an approximate solution simulated by means of a line with lumped parameters. Furthermore, special cases of steady running conditions of the line are reviewed, such as no-load running, short-circuit run and line operation with natural load. In conclusion of the theoretical part is given a general method of solving an extra-high-tension and extra high voltage network; also, some graphical methods of solving such networks are shown including their brief description. The second, practical part of the present paper involves application of the above mentioned methods of solution on a specific line with given parameters, solving conditions at the beginning of the line under steady running conditions and in special cases of the line operation. The conclusion of the thesis summarises the obtained results and provides final assessment of the individual methods of solution in terms of calculation accuracy.
|
|
|
Stabilized operation of the 220 kV power line
Staněk, Pavel ; Ptáček, Michal (referee) ; Blažek, Vladimír (advisor)
This thesis deals with methods of solving lines under voltage levels of very high transmission voltage and extra high voltage. The first, theoretical part of this paper analyses different methods how such lines are solved. In particular, an accurate solution is provided simulated by means of a line with evenly distributed parameters, and an approximate solution simulated by means of a line with lumped parameters. Furthermore, special cases of steady running conditions of the line are reviewed, such as no-load running, short-circuit and line operation with natural load. In conclusion of the theoretical part is given a general method of solving an extra-high-tension and extra high voltage network; also, some graphical methods of solving such networks are shown including their brief description. The second, practical part of the present paper involves application of the above mentioned methods of solution on a specific line with given parameters, solving conditions at the power line under steady running conditions and in special cases of the line operation. The conclusion of the thesis summarizes the obtained results.
|
|
| |
|
|
Thermoelectric Power Generation System
Brázdil, Marian ; Nerud, Pavel (referee) ; Pospíšil, Jiří (advisor)
In the last decade there is a rising interest in thermoelectric applications. Thermoelectric generators enabling the direct conversion of the heat into the electricity become attractive. This fact is caused by the demands of environmental operation and saving primary resources. Scientists intensively investigate and develop new materials and structures suitable for these applications. The efficiency of the thermoelectric conversion progressively increases. Unfortunately we have no available materials with sufficient thermoelectric properties which could provide cost-competitive price. Thermoelectric generators seem to be useable devices. For example, in case of the unused waste heat using of the thermoelectric generator can increase the overall effectiveness of the unit despite the low efficiency of the generator. This master thesis deals with the issue of the Peltier modules representing the main part of the thermoelectric generators. The physical principles and structures of the thermoelectric modules and the possibility of thermoelectric power production are described here. In the practical part of this thesis the design of the low power generator utilizing waste heat from biomass boiler Verner A 251.1 is proposed.
|
|
|
Sector coupling and the future form of the electricity and gas sectors
Švéda, Miroslav ; MA, Martin Šik, (referee) ; Radil, Lukáš (advisor)
This thesis deals with Sector coupling problematics. First, it deals with the development and present situation in the generation and consumption of electric power and the development and present situation in the extraction and consumption of natural gas in the Czech Republic and in the European union. Further, the thesis deals with Sector coupling, this concept is explained, and it is adumbrated what questions it deals with. Then, the technologies that can be achieved in the future of Sector coupling are introduced. Pilot projects of these technologies are presented as part of the discussion about these technologies. Finally, a consideration of the future use of Sector coupling technologies in the Czech Republic is given.
|
|
|
Design and realization of the power meter with IoT connectivity
Zagrapan, Ivan ; Lattenberg, Ivo (referee) ; Krajsa, Ondřej (advisor)
This thesis deals with designing and creating working prototype of IoT Wattmeter with option to switching relay. This device can be control remotely with option to read measured values. To reach my goals, I am using open-source designing board, different sensors and modules. I tis possible to communicate with device through Wi-Fi module ESP 8266 and to test LPWAN network I am using SIGFOX, module. To measure current, it´s used simple Hall-effect sensor and all available information’s are displayed on OLED display. To switch the circuit off or on solid state relay was used. In theoretical part of the work, I am trying to explain working principles of every module and source code, which I am using to control these modules. In practical part I created scheme, using CADSoft EAGLE and created functional wattmeter. Whole work is programmed in C++ language using Arduino IDE.
|
guest ::
