|
|
Residential building
Pazderka, Adam ; Sláma, Ludvík (referee) ; Mohelníková, Jitka (advisor)
The subject of this bachelor thesis is the design of a new residential building and the development of project documentation for the construction of a residential building with almost zero energy consumption. The building object SO01 - Residential house is located in the south-western part of the village Hustopeče, and it is mainly rectangular in shape set in the sloping terrain in the back half of the plot. The entrance to the building is oriented to the south side. The building has four floors above ground and a basement with a technical background of the building and a gym. Each storey contains two mirrorfacing residential units. The building contains six apartments with a layout of 4+1 and two attic apartments with a layout of 3+1 kitchenette. Access to the apartments is possible from a common staircase with an elevator shaft. The foundation structures are designed as strip foundations. The building is constructed of ceramic Porotherm bricks. The ceiling structure consists of a monolithic reinforced concrete slab. The roof is designed as a pitched gable roof and a pitched roof. The entrance to the building is designed for wheelchair access. From the south and north side, access is provided for the first to third floors to a covered balcony. The top floor provides access to the terrace for both attic apartments. The façade plastering is done in white shade with a combination of façade brick strips Klinker.
|
|
|
Rationalisation of manipulation shop
Vičar, Miroslav ; Neužil, Karel (referee) ; Hlavenka, Bohumil (advisor)
The aim of this thesis is to reach a distinctive rationalization of the production and assembling plant of Cargo Van Brno company. In the project of new lay-out of the production area were all restrictions given by management of the company and by owner of the property strictly met. Technological changes of the process plan and investments suggestions are determined by the company's strategic plan.
|
|
|
Optimal layout proposal of technological workplaces at a small mechanical engineering company
Mohorko, Martin ; Dvořák, Milan (referee) ; Štroner, Marek (advisor)
This master´s thesis is focused on technological designing in a small company ENGITEC Motosport s.r.o. In first theoretical part of the thesis is this subject described in detail and analyzed in terms of economic and technical aspect. Next part describes the current state of the company and the production hall as well with keep on its current layout. In the following chapters is chosen piston-shaped component, which is manufactured by the company and three different variants of the piston production. Then one of them is selected, to which all related capacities calculations are made. In the final part of the thesis is proposed the relevant final layout of the hall and there is also the technical-economic evaluation of the most relevant variant included. Key words
|
|
|
Optimal layout proposal of technological workplaces at a small mechanical engineering company
Janouškovec, Petr ; Peterková, Eva (referee) ; Štroner, Marek (advisor)
The bachelor thesis deals with the optimization of the arrangement of technological workplaces in a small engineering company of Mr. Benes. Technological designing is used for this optimization. The thesis contains a literature search that explains the basic concepts and procedures used to create these designs. Evaluation of the current state is used to identify the items necessary for optimization. New proposals are based on capacity calculation. They are aimed at improving working conditions and handling areas. The findings are verified from the economic point of view and in the end the most suitable variant is chosen.
|
|
|
Real Estate Division - a Farmstead
Šťastný, Petr ; Simonides, Martin (referee) ; Šmahel, Milan (advisor)
The present diploma thesis ‘Practical Division of a Real Estate – Agricultural Farmstead‘ is concerned with actual division of an agricultural homestead in XXX, the district of Olomouc. Based on the local examination which has been performed and after analyzing documents acquired from the owners, conclusions were drawn as to the possibility of dividing the estate while adhering to the applicable regulations of the civil procedure, construction law, construction technology, operational technology and economy. Valid price guidelines were used to determine the price of the estate and a comparative price of the estate was also estimated. Both price levels were also determined for the individual parts established by the practical division of the estate. The thesis consists of two basic sections. The first section focuses on theory, explaining the problem of practical division of an estate and providing a description of work of a certified expert drawing up this type of expert opinion. The second section comprises a practical part, which contains the expert opinion on the actual division of the agricultural homestead in the town of XXX in the Olomouc district.
|
|
|
Complex diagnostics of the family house
Tomanová, Jana ; Balkanský, Ondřej (referee) ; Schmid, Pavel (advisor)
This master´s thesis deals with the issue of the building from a clay. It is focused on defects and rehabilitations of these constructions. The introductory parts concerns with probable defects especially of clay buildings, furthermore with causes of the creation of defects, its depictions and the relevance. In the following part the methods of rehabilitation not only of clay buildings are presented. In this part the rehabilitative methods of foundation, vertical and wood constructions, which create mainly the structural support of the buildings, are described. In the second part, the structural and technical research of the current structure with farm part – barn is executed. The part of research is creation of the drawing documentation, description of disposition and structural and constructional solution of building, structural calculation of a part of construction, assessment of actual state of structure and prospective plan of proceeding and rehabilitation.
|
|
|
Detailed project proposal of a technological workplace in the company Kovo Poláček
Věžníková, Tereza ; Neužil, Karel (referee) ; Strejček, Jan (advisor)
The presented masters’s thesis deals with the design of a new production hall for the metalworking and with the proposal of a facility for the powder coating in the company Kovo Poláček in Nesvačilka. The solution is preceded by a literature search of the designing and explanation of some basic concepts in the subject matter. The part of this thesis is an analysis of the current situation of the company including an analysis of its internal and external environment affecting the company. The result of this thesis is the creation of the layout with respect to safety and ergonomics, verified by the calculation of capacity for a typical product, as well as an economic evaluation of the investment.
|
|
| |
|
|
Proposal for technological layout of machines in a milling room of a mechanical engineering company Tirad
Dohnal, Tomáš ; Navrátil, Petr (referee) ; Kubík, Roman (advisor)
Tirad, a metal machining company, plans to build a new hall as an extension of its operation. This paper deals predominantly with production flow analysis of present operation. The analysis draws upon literary study and the company's previous production experience. Possible placement of machines is suggested in the following part of the paper, based on the analysis and requirements of the company. The fundamental requirement is to separate roughing and finishing technological operations, moving the latter completely into the new hall. The deployment of machines is optimized with regard for materiál flow. The new hall's dimensions are outlined in a drawing. Three options of machine deployment are discussed. In conclusion, these options are compared to one another and also to the present state.
|
|
| |
guest ::
