|
|
Precision datalogger and voltage signal source
Šafář, Pavel ; Matějka, Tomáš (referee) ; Kubíček, Michal (advisor)
This work deals with the design and construction of a precise device for voltage measurement, which at the same time enables the generation of a precise output voltage signal. The various effects of interference sources on accuracy and the possibilities of their elimination are discussed here. The selected solution concept is described. The work also deals with individual phases of development and explains the reasons for their modifications in different phases.
|
|
|
Smart Metering of Water Supply System at Campus of Faculty of Civil Engineering BUT
Černíková, Eva ; Ručka, Jan (referee) ; Tuhovčák, Ladislav (advisor)
The aim of this thesis is to perform an analysis of possibilities and benefits of installing the Smart Water Metering technology at campus of Faculty of Civil Engineering, Brno University of Technology. The main goal was to provide specific solutions of Smart Metering systems from different companies. One part of this thesis is dedicated to a detailed analysis of a water consumption measurement campaign that took place at the beginning of this academic year using dataloggers. Real-time flow rate and consumed volume was recorded every five minutes. Therefore it was possible to determine water consumption patterns during the day and also tell the minimum, maximum and average flow rate in different parts of the campus. Thanks to these measurements, irregular water consumption during the night was observed. This would not have been easily detected without recording real-time data. This system of recording real-time flow rates with dataloggers is considered to be suitable for the needs of faculty. Thanks to a GSM module, recorded values are sent to an FTP server once a day. From there the data can be downloaded to any kind of analysis software. Installation of Smart Water Metering technology at campus of Faculty of Civil Engineering would be beneficial for both operation of the water supply network and also for purposes of an academic research.
|
|
|
Datalogger with Ethernet
Orávik, Tomáš ; Šťastný, Ladislav (referee) ; Bradáč, Zdeněk (advisor)
Thesis deals with Datalogger with Ethernet interface controlled by DISCOVERY Kit STM32F429. Datalogger is equipped with eight digital inputs and three analogue inputs. The measured data are saved on the SD card. The Ethernet interface module is designed using LAN8720A from Microchip.
|
|
|
Datalogger of environmental values
Raichl, Petr ; Benešl, Tomáš (referee) ; Bradáč, Zdeněk (advisor)
The thesis is aimed on construction of solar panel powered datalogger of environmental values. The thesis begins by research of commercial dataloggers. Then the concept of datalogger was created. Then the electronics of datalogger was designed. Datalogger is built as a system driven by microcontroller. The microcontroller reads data from sensors, writes data to memory card and sends data to Czech radiocommunications cloud by LoRa technology. Then the data are resend to MySQL database. Program for microcontroller was made in C language. Configuration of datalogger is done through USB interface by PC application which was created in C# language. For visualisation of measured data ASP.NET Core application was created.
|
|
|
Electric Longboard Powertrain Design
Pliešovský, Libor ; Tobiáš, Martin (referee) ; Fojtášek, Jan (advisor)
This diploma thesis deals with the design of electric longboard drivetrain for commuting. The first part deals with the recherche of electric longboards and drivetrain concept selection. The second part contains the design of the whole assembly with focus on the drivetrain. The last part is devoted to the longitudinal driving dynamics.
|
|
|
Compact datalogger with flash memory
Vágner, Martin ; Hynčica, Ondřej (referee) ; Bradáč, Zdeněk (advisor)
This thesis deals with design of small datalogger with flash memory card. At first are discussed parameters, functions and features of dataloggers. The second part deals with a problem of digital measurement of analog signals. The rest of this thesis gives attention to main goal which is design of datalogger. It consists of circuit diagram, layout of printed circuit board, firmware for microcomputer and software for PC.
|
|
| |
|
|
Data logger
Dráb, Dominik ; Pazdera, Ivo (referee) ; Ctibor, Jiří (advisor)
This master's thesis deals with design of universal data logging device. The work proposes the design of device architecture and describes individual systems and components, that are necessary for data logging. Logger is designed as a mobile device, with ARM microcontroller at its core. Thesis specifies requirements for device in terms of performance and versatility. The device uses modular construction, as it comprises multiple PCBs. The thesis describes their design and also design of the mechanical construction of data logger. Designed device has been realized and assembled. Software design for microcontroller is also part of the thesis. In the last part, measurements to determine achieved parameters of the device are conducted.
|
|
|
Datalogger with parallel data logging
Havlena, Marek ; Minář, Petr (referee) ; Zuth, Daniel (advisor)
This Bachelor's thesis is dedicated to the design and implementation of the Datalogger module, which stores data in two different memory storages. First memory storage is solved by using an SD card and the second is the internal EEPROM memory of the microcontroller. It also deals with data synchronization between these memory storages. Communication between the cards is through the SPI bus and communication with the module is provided by a serial interface designed by USB transmitter (UART).
|
|
|
Monitor for Wireless M-Bus
Baštán, Ondřej ; Arm, Jakub (referee) ; Šťastný, Ladislav (advisor)
The thesis proposes a battery-powered devices to monitor and record communications Wireless M-BUS. Work describes how the communication protocol M-BUS, and the related wireless communication protocol Wireless M-BUS and selection of appropriate hardware for the design of the equipment in question. Work also deals with the design and creation of firmware that matches the selected hardware and purpose solutions.
|
guest ::
