|
|
Proposal of conformity assessment and inspection procedure of a cyllinder flange
Ondruška, Jan ; Jankových, Róbert (referee) ; Harčarík, Matej (advisor)
This bachelor thesis contains the control plan creation procedure for conformity assessment of a cylinder flange. The thesis includes a selection from standards related to the above-mentioned problems and the drawing documentation of the part. The cylinder flange is analysed in terms of function and unambiguous specification of geometry on the drawing of the part with regard to further part inspection. Any deficiencies in clarity are dealt with in more detail and solutions to these problems are proposed. Control plans for inspection of the part directly in the manufacturing process and for inspection of the part during sampling were created using CAQ software and are attached to the work. The results of the work have been used to improve the process of manufacturing of the part.
|
|
|
Residence Lazecká – construction technology project
Kunovský, Jan ; Valenta, Michal (referee) ; Biely, Boris (advisor)
The subject of the diploma thesis is the elaboration of a construction technological project for an apartment building Residence Lazecká in the city of Olomouc. The content of the work is a technical report on the construction technology project, with the elaboration of the method of implementation of the main technological stages. Furthermore, the project of construction site, its detailed design and changes during construction. Solution of traffic relations around the construction site and the possibility of traffic service. Design of construction machinery, technological regulation and control and test plan for waterproof concrete structures of substructures. And last but not least, an itemized budget and a detailed timetable (gantt chart) for the rough construction of the main building.
|
|
| |
|
|
Special basic school and Practical school with orphanage in Zlin - structural technological project
Hrdlička, Michal ; Špinar, Petr (referee) ; Kantová, Radka (advisor)
This diploma thesis deals selected parts of a structural technological project for new building Basic school and Practical school with orphanage in Zlín. It contains studies of main technological steps, chronological plan, calculation, project of site equipment, technological prescription for concrete roof, suggestion construction machinery and another selected parts. This new brick building includes 3 floors with basement and is located in a separate educational area. Basic monolithic concrete constructions with steels are realizated as a surface structures.
|
|
|
Pressure vessel contor plan
Tesařová, Tereza ; Kotek, Luboš (referee) ; Rozehnalová, Jana (advisor)
The aim of this bachelor thesis is to create a control plan for a pressure vessel in cooperation with company Frauenthal Automotive Hustopeče s.r.o.. In the theoretical part of thesis I deal with the subject and its related documents or standards. Then I describe utilization all of related documents and creation of control plan in the practical part.
|
|
|
Proposal for System of Creation of Inspection and Management Plans
Romanová, Eliška ; Fröhlich,, Lubomír (referee) ; Juřica, Pavel (advisor)
This diploma thesis deals with analysis of control and management plans in Saar Gummi Czech, s. r. o. comapany, especialy control and management plans related to extrusion department in Červený Kostelec. This thesis also focuses on design of a control and management plan creation system. The first part of thesis describes general knowledge and concepts of control an management plans. In the second part thesis describes state of control and management plans in comapany Saar Gummi Czech, s. r. o. In the last part of this thesis will be designed creation system of control and management plans for this company.
|
|
|
Rationalization of production of digital receiver
Polák, Martin ; Maruška, Josef (referee) ; Špinka, Jiří (advisor)
This diploma thesis deals with topics related to optimalization and increases quality production in the electronics industry. Project purpose was to analyze process production manufacturing digital receiver in specific situation applied upon multinational company. Main part mine work was build-up FMEA analysis and creation control plan production line. For optimize production flow was application method lean production and for department material supply method KANBAN. This diploma thesis has been written within cooperation of Celestica Ráječko company where I have picked up data and knowledge to above-mentioned topic.
|
|
|
Residence Lazecká – construction technology project
Kunovský, Jan ; Valenta, Michal (referee) ; Biely, Boris (advisor)
The subject of the diploma thesis is the elaboration of a construction technological project for an apartment building Residence Lazecká in the city of Olomouc. The content of the work is a technical report on the construction technology project, with the elaboration of the method of implementation of the main technological stages. Furthermore, the project of construction site, its detailed design and changes during construction. Solution of traffic relations around the construction site and the possibility of traffic service. Design of construction machinery, technological regulation and control and test plan for waterproof concrete structures of substructures. And last but not least, an itemized budget and a detailed timetable (gantt chart) for the rough construction of the main building.
|
|
|
Pressure vessel contor plan
Tesařová, Tereza ; Kotek, Luboš (referee) ; Rozehnalová, Jana (advisor)
The aim of this bachelor thesis is to create a control plan for a pressure vessel in cooperation with company Frauenthal Automotive Hustopeče s.r.o.. In the theoretical part of thesis I deal with the subject and its related documents or standards. Then I describe utilization all of related documents and creation of control plan in the practical part.
|
|
|
Proposal of conformity assessment and inspection procedure of a cyllinder flange
Ondruška, Jan ; Jankových, Róbert (referee) ; Harčarík, Matej (advisor)
This bachelor thesis contains the control plan creation procedure for conformity assessment of a cylinder flange. The thesis includes a selection from standards related to the above-mentioned problems and the drawing documentation of the part. The cylinder flange is analysed in terms of function and unambiguous specification of geometry on the drawing of the part with regard to further part inspection. Any deficiencies in clarity are dealt with in more detail and solutions to these problems are proposed. Control plans for inspection of the part directly in the manufacturing process and for inspection of the part during sampling were created using CAQ software and are attached to the work. The results of the work have been used to improve the process of manufacturing of the part.
|
guest ::
