|
|
Three-Aisled Steel Building
Lečbych, Antonín ; Bajer, Miroslav (referee) ; Buchta, Stanislav (advisor)
The thesis contains the design and assessment of three-aisled steel building for small metal production. Supporting span of construction hall is 9, 18 and 9 m. In the middle wing is situated bridge crane with capacity of 2 tons. The estimated location of the object is Luhačovice. The initial design concept was specified by supervisor (as the idea of the investor/architect), for which was did static and structural solution and assembly details. For selected option was made a calculation of supporting structures and selected assembly details. The hall has a rectangular floor plan of 36x36m and ridge height is 9 m. The central wing is made of steel and side extensions are made of glued laminated timber.
|
|
|
Workpiece conveyor
Vaníček, David ; Hermanský, Dominik (referee) ; Dokoupil, Vladimír (advisor)
This master‘s thesis is focused on the design of manipulator for crankshaft handling in flexible production lines. The first part describes the types of production lines and possible ways of inter-operative manipulation. With regard to the suitability of their use, a suitable variant is selected, which is then conceptually processed and verified by technical calculations. The final conclusion is the verification of the design in terms of safety. Part of the master‘s thesis is technical drawing documentation.
|
|
|
Pillar jib crane
Martinka, Tomáš ; Pokorný, Přemysl (referee) ; Malášek, Jiří (advisor)
This bachelor thesis deals with the design of an alternative atypical construction of a column crane including important strength calculations according to specified parameters: arm extension length 4000 mm, lift height 8500 mm, load capacity 2000 kg. Part of this work is also elaboration of technical report with analysis of construction, selection of suitable hoist with important calculations. Further draw a construction drawing of the column crane assembly according to the entered parameters and a detailed drawing of the column.
|
|
|
Frýdek roofed grandstand
Kofler, Nikodém ; Horáček, Martin (referee) ; Pešek, Ondřej (advisor)
The work deals with a design of a steel structure of a grandstand with a roof at the football stadium in Frýdek-Místek. The floor plan dimensions are 50 × 14 m, the height is 16,4 m. The auditorium structure consists of lattice girders placed on main girders. Mono-pitched roof is supported by rods to columns. The construction material is S235 steel.
|
|
|
Survey and Diagnostics of Building Construction
Frimlová, Eva ; Heřmánková, Věra (referee) ; Anton, Ondřej (advisor)
This thesis deals with the construction survey and diagnostics of the New synagogue in Velké Meziříčí. The aim of the work is to perform an inspection, construction survey of the building and evaluation of its current condition using classical survey and diagnostic methods. The work is processed as the final report from the construction and technical survey of the building. It contains its course and results. The main part of the survey is brick masonry, its failures and structural assesment. The thesis includes also survey of foundation structures, the history and description of the building.
|
|
|
Design of a tablet press
Nečas, Zbyněk ; Štěpánek, Vojtěch (referee) ; Hermanský, Dominik (advisor)
The aim of this bachelor's thesis was to develop your own design of a tablet press for the pharmaceutical industry, including selected production drawings, assembly drawings and models in a 3D modeler. In the introductory part, the thesis deals with a search in the field of tablet presses and the subsequent evaluation of the current state of knowledge. Furthermore, the work contains design calculations necessary for the construction of this machine and a discussion of parts of the final design. Finally, the resulting parameters of the design solution and possible recommendations for practice are evaluated.
|
|
|
Formula Student Tubular Frame New Evolution Design
Slimařík, Dušan ; Dundálek, Radim (referee) ; Ramík, Pavel (advisor)
Design of new evolution steel welded tubular frame specified for Formula Student series is the main goal of this thesis. In the first instance, type of frame designs is described. Next part of thesis is devote to rules, which must be respected in designing of new evolution of tubular frame. In main part, construction design and calculations of torsional stiffness using MKP analysis are mentioned. Interesting point of this work is located at penultimate part, which deals with preparation of tubular frame production. This is integral part of the construction process at all. Thesis ends with project summary.
|
|
|
Mechanical barrier project
Vaníček, David ; Kašpárek, Jaroslav (referee) ; Malášek, Jiří (advisor)
The first part of this bachelor’s thesis was to research various existing mechanical barriers designed to guard car parks and consider the suitability of their application based on relevant calculations including the appropriateness of their selection of components. Following the research the aim was to design an improved system for the mechanical barrier using suitable components, supported by functional calculations and appropriate technical drawings.
|
|
|
Design of combustion chamber 30 kW for gaseous fuels
Rychter, Aleš ; Hudák, Igor (referee) ; Skryja, Pavel (advisor)
Master thesis deals with design of combusting chamber for gaseous fuels with predicted thermal output less than 30 kilowatts. Designed equipment will be used as a generator of flue gases with required parameters further used for experimental catalytic unit. Due to the need of draft creation inside the combustion chamber and exhaust pipe is master thesis also deals with design of ejector nozzle, which will be used for this purpose. Opening chapters of this work, considering a theoretical part, are focused on basic classification of combustion chambers and industrial burners. Next and main chapter is dedicated to main goal of this work, which is combustion chamber design, containing necessary calculations divided into balance calculation and construction design. Final chapters deals with above mentioned calculation of ejector nozzle ensuring sufficient draft and also sufficient cooling of flue gases incoming from catalytic unit.
|
|
|
Design of the hobby CNC milling machine
Hrala, Adam ; Tůma, Jiří (referee) ; Štěpánek, Vojtěch (advisor)
The focus of the bachelor's thesis concerns the design of a CNC model milling machine. It includes a representation of the kinematics of individual types, operating systems for these machines, hazard analysis and market research. In the second part there is a design of the overall device from the point of view of the drive and guidance of individual axes, the electronics used and a design of the machine structure supplemented by a drawing of the assembled device.
|
guest ::
