|
|
Energy optimization of the administrative building
Černý, Tomáš ; Horák, Petr (referee) ; Adam, Pavel (advisor)
The diploma thesis deals with the energy audit of administrative building. In the theoretical part I described the heat pumps. In a calculated part I proposed austerity measures and created of them saving variant. I chose the most suitable variant and assess it from an economic and ecological point of view. In the third part, I use the calculation program to optimize the building.
|
|
|
PCM-based heat and cold storage
Němec, Lukáš ; Ostrý, Milan (referee) ; Šikula, Ondřej (advisor)
In the first part of the bachelor thesis I will deal with the accumulation of heat and cold using materials with phase change and also the design of a PCM storage tank. The aim of my effort is to design the most ideal spacing of tubes in a given tank, so as to achieve the greatest possible heat capacity. I performed simulation experiments in CalA 4.0. The second part is computational, where I focus on the design of heating in the pension. I solve heating with an air-to-water heat pump. I designed solar collectors for hot water heating. The last and third part is the project, which contains the project documentation together with the technical report.
|
|
|
Energy evaluation of apartment building.
Fečer, Tomáš ; Horák, Petr (referee) ; Adam, Pavel (advisor)
A goal of this Master's Thesis is an energy audit of an apartment building situated in Brno, the southmoravian region. The theoretical part is focused on a Czech Republic legislation, methods of an energy evaluation of houses and injurants of an internal microclimate. In the next part the main focus is on a processing of the energy audit of the apartment building. One of details of this processing is a design of precautions. From these, variants are created, focusing to choose the most economical and ecological one. The last part of this Master's Thesis is devoted to an usage of available software applications. Here are described computer programs, used for a creation of a 3D model. Also, a description of a calculation of thermal loses and the calculation of coefficients of heat transfer using a quasi-stationary technique is present. At the end a detailed description of one year simulation of the apartment building is provided.
|
|
|
Energy evaluation of office building.
Lysková, Markéta ; Horák, Petr (referee) ; Adam, Pavel (advisor)
This diploma thesis is dealing with energy audit of industrial building with administration part, situated in Blansko, South Moravia region. The theoretical part is focused to windows from the energy balance point of view, because one of the energy saving measures is the change of current insufficient window filling. The main objective of this diploma thesis is to find the most energy saving variant which is going to be evaluated from the both, ecological and economical, aspect. The third part is dedicated to usage of computer technology as software for 3D model creating of assessed building or energy consumption simulation for particular systems as heating in relation to characters of different kinds of windows.
|
|
|
Polyfunctional Building
Holub, Ondřej ; Kopřivík, František (referee) ; Košíčková, Ivana (advisor)
Diploma Thesis „Polyfunctional building“. The work deals implementation project of polyfunctional building in Jihlava. Object is situated on Jihlava suburb in emerging part called „Horní Kosov“. Land is gently sloping from west to east. It continues for Buková street. The building has six floors and a basement. The basement is made from monolithic reinforced concrete. It is used as garages. Floors are made of ceramic bricks with isolation . First floor contains four commercial premises and main entry for housing part. Seventeen flats are situated from second to sixth floor. Sizes of apartments are 1+kitchen corner to 4+kitchen corner with terraces and balcony. Roofing is solved with simple flat roof. Heating will be ensured with central heating. Every apartment, commercial premises, shared premises are going to have it’s own gas boiler. Polyfunctional building is connected on a local road – Buková street, which is connected to new communication. Within multifunctional building twenty parking slots is designed at the basement. Next fourteen parking slots is designed outside.
|
|
|
Environmentally Advanced Library
Burýšková, Jana ; Vyhlídalová, Karolína (referee) ; Horák, Petr (advisor)
The main aim of the Master‘s project is to design a library and a cafe in Příbram. The project is divided into three parts. The first part deals with architectural and structural design. The second with technical building services and the third with thermal imaging. The building has a basement and two above-ground floors. The building is founded on foundation strips. The building is designed with load-bearing brick walls and pre-stressed slabs Spiroll. The roof is a flat intensive green roof. The building envelope is insulated with mineral wool. In the building there is air a conditioning and a cooling system. As a heat source, a pressure-independent heat exchanger unit connected to the local hot water pipe will be used. A part of the electricity consumption is covered by photovoltaics. In the third part there are images from a thermal camera for some libraries. Imagines were evaluated if there are thermal bridges in the measured libraries. The project was carried out in the AutoCAD programme.
|
|
|
Energy Audit of Multipurpose Building
Čajčíková, Jolana ; Počinková, Marcela (referee) ; Horák, Petr (advisor)
The theme of this diploma thesis are the issue of energy evaluation of buildings and the reduction of energy consumption in the Czech legal system in the theoretical part, an analysis of energy consumption of the judged building in an old and new state in the calculation part and an energy audit of the main building of SRC Lihovar in Třemošnice according to Decree no. 480/2012 Coll. The three-storey main building of sports and rehabilitation center is located on the southern edge of city Třemošnice and it used to be a distillery until it has been renovated in 2013. There is a restaurant with a bowling room, hotel with two conference lounges, wellness, fitness and a swimming pool. The heat source for this building are two gas boilers, three heat pumps and solar collector array. There is partly forced and partly natural ventilation installed in the building.
|
|
|
Energy assessment and certificate of energy performance of buildings
Bidmonová, Renata ; Horká, Lucie (referee) ; Horák, Petr (advisor)
The aim of the diploma thesis is to evaluate the energy assessment and elaboration of energy performance certificates of the building. The building is an apartment building in Vítkov. The theoretical part deals with centralized heat supply. The calculation part contains a more detailed description of individual relationships and calculation procedures that are used to process energy performance certificates of the building. Furthermore, proposals for measures to improve the energy performance of buildings. In this part there is also a proposal of individual equipment of the new boiler room and thermographic measurement. In the project part there is an energy assessment assessing the building in two variants with individual heat sources. The evaluation is carried out from an energy, economic and environmental aspect.
|
|
|
Environmentally Advanced Library
Burýšková, Jana ; Vyhlídalová, Karolína (referee) ; Horák, Petr (advisor)
The main aim of the Master‘s project is to design a library and a cafe in Příbram. The project is divided into three parts. The first part deals with architectural and structural design. The second with technical building services and the third with thermal imaging. The building has a basement and two above-ground floors. The building is founded on foundation strips. The building is designed with load-bearing brick walls and pre-stressed slabs Spiroll. The roof is a flat intensive green roof. The building envelope is insulated with mineral wool. In the building there is air a conditioning and a cooling system. As a heat source, a pressure-independent heat exchanger unit connected to the local hot water pipe will be used. A part of the electricity consumption is covered by photovoltaics. In the third part there are images from a thermal camera for some libraries. Imagines were evaluated if there are thermal bridges in the measured libraries. The project was carried out in the AutoCAD programme.
|
|
|
PCM-based heat and cold storage
Němec, Lukáš ; Ostrý, Milan (referee) ; Šikula, Ondřej (advisor)
In the first part of the bachelor thesis I will deal with the accumulation of heat and cold using materials with phase change and also the design of a PCM storage tank. The aim of my effort is to design the most ideal spacing of tubes in a given tank, so as to achieve the greatest possible heat capacity. I performed simulation experiments in CalA 4.0. The second part is computational, where I focus on the design of heating in the pension. I solve heating with an air-to-water heat pump. I designed solar collectors for hot water heating. The last and third part is the project, which contains the project documentation together with the technical report.
|
guest ::
