|
|
Three-Aisled Steel Building
Lečbych, Antonín ; Bajer, Miroslav (referee) ; Buchta, Stanislav (advisor)
The thesis contains the design and assessment of three-aisled steel building for small metal production. Supporting span of construction hall is 9, 18 and 9 m. In the middle wing is situated bridge crane with capacity of 2 tons. The estimated location of the object is Luhačovice. The initial design concept was specified by supervisor (as the idea of the investor/architect), for which was did static and structural solution and assembly details. For selected option was made a calculation of supporting structures and selected assembly details. The hall has a rectangular floor plan of 36x36m and ridge height is 9 m. The central wing is made of steel and side extensions are made of glued laminated timber.
|
|
|
Footbridge
Smělíková, Petra ; Puchner, Josef (referee) ; Sýkora, Karel (advisor)
The topic of my Bachelor's thesis is a static assessment of a bearing structure of a current footbridge which is also used for cycling. It is placed in Kunovice near Uherské Hradiště. The length of span is 28 meters. Its construction is solved as space framework with through-span. Main beam is truss structure with upper saddle flange. The height of beam in the middle of the span is 2.5 meters and above supports is 1.5 meters. The calculation is done either by hand or using calculation program Scia Engineer 2012.0.
|
|
|
Realization of educational problem based on preloaded bolted joint apparatus
Žaba, Tomáš ; Náhlík, Luboš (referee) ; Vaverka, Michal (advisor)
In the master’s thesis an educational task concerning an experimental apparatus for quantity measurement in preloaded bolted joint is realised. In terms of its preparation an innovation of the apparatus leading to an easier and faster pretension realisation was implemented. The educational task for students and also teaching material were produced. The educational task itself consists in experimental confirmation of the relation between the tightening torque and the caused pretension. An FEM model simulating an apparatus flange deformation by given pretension was designed to verify the experiment. The thesis also contains information about the preloaded bolts, pretension elicitation methods and pretension control methods.
|
|
|
Trade House in Brno
Serbousková, Kateřina ; Sýkora, Karel (referee) ; Barnat, Jan (advisor)
The final thesis deals with the design of the steel loadbearing structure of the shopping center situated in Brno. The built-up floor area is 1973 m2 (L-shaped ground plan with dimensions 48 m x 50 m). The construction consists of three parts. Building A has four above-ground floors and reaches a height of 25.5 m. The steel structure of mono-pitched roof is designed in two options. Both options consist of full-length purlins and truss girders. Building B is a single-storey building with a mono-pitched roof top reaching 8.1 m high. Building C is three-storey with a flat roof. The first floor has a construction height of 4.5 m and the remaining two floors reach height of 3.6 m, which coincide with building A. The steel structure is made of steel-concrete composite ceilings and pin-supported columns. In the case of bracings, pressure was eliminated by means of non-linearities.The work includes proposal, assessment of the supporting structure and calculation of the directional details. Internal forces were determined based on a static analysis in the SCIA Engineer calculation program.
|
|
|
Steel structure of a military museum
Šašinka, Jakub ; Barnat, Jan (referee) ; Štrba, Michal (advisor)
The diploma thesis describes the design and assessment of steel structure of the roofing of the military museum in Králíky. The supporting structure of hall is 40.00 meters span. The total layout are 55.93 x 72.04 m, building height 11.43 m, 16.11 m pylon height. Main construction material is steel, grade S355, secondary constructions are made from steel grade S235, rods are made from steel grade S460. I did optimization of steel structure and chose the best option. For this option I made detailed structural analysis. It is prepared by static analysis of the main load-bearing parts of the structure, including joints and details. The supporting structure of hall consists in the transverse direction from the curved spatial lattice structure made of steel circular tubes which hang on rods on a sloped pylon. Part of the report is open-air roofing.
|
|
|
Steel structure of lookout tower
Pavlas-Jirásek, Václav ; Horáček, Martin (referee) ; Balázs, Ivan (advisor)
The diploma thesis deals with the design of a main load-bearing steel structure of the lookout tower with the height 35,5 m. Two different types of solution were designed. The first design is a spacial truss structure and the second design is a fixed solid cantilever. The first solution was chosen to be further developed. The truss structure has square plan that varies with height. The width is 6,6 m in the level of supports and 3,6 m in the narrowest section. Main bearing members are five pin-supported columns. The base material is steel of class S355.
|
|
|
Bolted joint of turbocharger and cylinder head
Kolivošková, Veronika ; Píštěk, Václav (referee) ; Novák, Kamil (advisor)
The subject of this diploma thesis is the theoretical basis of the screw connection theory and the subsequent application to the specific screw connection problem. Mentioned connection is part of the turbo charged combustion engine, specifically directly between the cylinder head and the turbocharger. The diploma thesis is divided into several parts. The first part dealing with selected chapters of the screw connections and the combustion engines theory, whose knowledge is important for further chapters of this diploma thesis. The next part shows method of creating the geometric and computational model, on which were performed the appropriate sensory analyses with respect to determine the cause of the nut and bolt loose in the given connection. On the basis of the gained knowledge and their evaluation has been created a separate calculation methodology in the last part of this thesis, which describing parameters that have an impact on this undesirable phenomenon, and which should be included in analyses for similar issues. The diploma thesis was realized in cooperation with ŠKODA Auto a.s., tř. Václav Klementa 869, Mladá Boleslav, and AUDI AG, Union-Straße 1, Ingolstadt.
|
|
|
Steel construction of an exhibition pavilion
Wawreczka, Karel ; Šmak, Milan (referee) ; Štrba, Michal (advisor)
The aim of diploma thesis is to design steel roof structure of minimum dimensions 45 m x 50 m and minimum height 12 m. The plan of the building design has dimensions of 52,14 m x 70, 00 m and height is 18,68 m. The roofing was design as 3D truss girders with two lower chords and one upper chord. The shape of 3D truss girder consists of three circular arcs of radius 69,88m, 12,43 m and 33,45 m. Between main girders is 3D bracing. The structure is pin-supported.
|
|
|
The design of hinge on bus technical and luggage compartments
Daněk, Lukáš ; Tůma, Jiří (referee) ; Knoflíček, Radek (advisor)
The bachelor's thesis deals with the design of hinge for the doors on bus technical and luggage compartments. The theoretical part is focused on the types of hinges and their capabilities. The practical part deals with the design process, including system analysis using calculations and measurements. A solution universally applicable on different door sizes is proposed, which also meets the requirements for water drainage and door adjustment. The final assembly is optimized by calculations. Benefits and impacts are evaluated.
|
|
|
Rally team base
Mikeš, Daniel ; Horáček, Martin (referee) ; Pešek, Ondřej (advisor)
The object of the diploma thesis is the design and the assessment of the steel structure for rally team base in Napajedla, which contains the space for the administration and the space for the service hall. The overall ground plan proportions of the structure are 30 x 26 metres. The structure for administration is the four-storey building. The ground plan proportions of this structure are 30 x 12 metres and the height is 14.5 metres. The ground floor grid of the main load-bearing structure is 6 x 6 metres. The height of the one floor of the structure is 3.5 metres. The structure of ceilings and roof is designed like composite steel and concrete structure. All joints of the steel structure for administration are designed like bolted joints. The spatial rigidity of the structure is ensured by vertical wall truss bracings and by the rigidity of composite steel and concrete structure of ceillings and roof. To the structure for the administration is connected structure for the service hall. The ground plan proportions of this structure are 30 x 14 metres and the height is 10.5 metres. The main structure of the structure for service hall is frame with the rigid joint in the corner of the frame. The axial distance of the main structures is 6 metres. All joints including the rigid joint in the corner of the frame of the steel structure for service hall are designed like bolted joints. The spatial rigidity of the structure is ensured by vertical wall truss bracings and horizontal roof truss bracings. The whole structure is designed of steel S355.
|
guest ::
