|
|
Detached house
Fazekas, Dávid ; Žižka, Lukáš (referee) ; Vajkay, František (advisor)
The subject of this thesis is two-storey wooden basement house. The building plot is located in Brno. The House is designed with the view of surrounding buildings and the location. The House will be used for living of a family of five members. The plan view of the House is almost rectangular. The main entrance and the driveway to the House is at 1st floor level. The vertical walls are formed by a wooden frame with thermal insulation sheathed on both sides of wood chip boards and plasterboards. The ceiling structure is made of wooden beams with embedded insulation. The detached house is covered with two sloping shed roofs. The project was prepared by a computer program called Nemetschek Allplan..
|
|
|
Heating multifunctional building
Čajčíková, Jolana ; Horák, Petr (referee) ; Počinková, Marcela (advisor)
The theme of this bachelor´s thesis are problems of condensing gas boiler rooms in the theoretical part and heating multifunctional building in the calculation part. The four-floor multifunctional building is situated in Brno in a slightly built-up area and includes commercial units, classrooms and administrative units for rent, an IT company and a restaurant for 120 people situated in the fourth floor. The heat source for this building is a gas condensing boiler room. The heating surface consists of steel panel radiators. There is forced ventilation installed in the building.
|
|
|
Apartment building
Bílek, Zdeněk ; Nespěšný, Ondřej (referee) ; Pěnčík, Jan (advisor)
The subject of the bachelor's thesis is the elaboration of the project documentation of an apartment building in Vyškov. The building has four floors above and one underground floor. The building has thirteen housing units. Each of the apartments on the fourth floor has its own terrace. The floors from the basement to the fourth floor are connected by a staircase and an elevator shaft. In the basement there is a cellar, bicycle shed and warehouse. There are twenty-one parking spaces on the plot, twenty of which are common and one for people with reduced mobility and orientation. The vertical load-bearing walls of the above-ground part are made of aerated concrete fittings. The underground part of the building is solved by lost formwork. Horizontal load-bearing structures are prefamonolithic. The roof is flat single skin.
|
|
|
Family business house
Svoboda, Tomáš ; Papranec, Michal (referee) ; Fuciman, Ondřej (advisor)
The project has been prepared complete documentation of new building to family business house the level of documentation for building construction. The building is without basement with two floors. House is designed for a family of four to five. Premises will be used as a law office. The building is designed completely from the system POROTHERM. The roof is designed with gable roof. The proposal emphasizes the object static and layout, fire safety, energy saving and safety in use. Design documentation was implemented in the program ArchiCAD. The building is designed for year-round living.
|
|
|
Apartment house
Nebáznivý, Tomáš ; Fixelová, Veronika (referee) ; Čuprová, Danuše (advisor)
The aim of this bachelor thesis is a preparation of the project documentation providing information for the construction of apartment building. The apartment building is located in Valašské Meziříčí. The building has three above-ground floors and it is partially basement. An utility room, a storage room and the cellar rooms for the individual apartments are situated in the basement floor. A room for strollers and bicycles is placed on the first ground-floor as well as a cleaning room and the three dwelling units. The second floor and the third floor consist only of the apartments. In the apartment building there are 9 dwelling units. The construction system of the building is designed as a brick house, made concretely of Porotherm brick blocks. Load-bearing peripheral basement masonry is made of concrete blocks of permanent formwork. Horizontal load-bearing structure consist of reinforced concrete monolithic ceiling. The roofing of the building is solved by a warm flat roof made of PVC-P waterproofing roofing foil. The building is equipped with a certified contact thermal insulation system named ETICS.
|
|
|
NEW ON THE „OLD“ – Brno, Bratislavská - Stará Corner
Šafářová, Monika ; Foretník, Jan (referee) ; Nový, Vítězslav (advisor)
Multifunctional house on the corner of Bratislavská and Stará in Brno. The solution of a vacant lot and the reaction to the current situation in the surroundings of Cejl. The basis of the aproach to the proposal was an intention to hold, underline and establish the specific character which can be sensed throughout the whole district and which makes the district special in the relationship to other parts of Brno. The proposal is completing the vacant lot and it is creating a defined street line. The design is working with the inner space rather than with its surroundings which is characteristic for the whole area of Cejl. The building has quite a strict look on the outside but it is the intention not to disturb the look of the streets.
|
|
|
Apartment building in Hutisko - Solanec
Šrámek, Jakub ; Pilík, Václav (referee) ; Bantová, Sylva (advisor)
The bachelor’s thesis focuses on the topic an apartment building in the village Hutisko-Solanec and it is processed in the form of documentation for the execution of constructions. The building contains five units 3+ kk, one unit 2+ kk and two units 1+ kk. The building is in the shape of a simple rectangle with three above-ground and one underground floor. A structural system of the building is brick, combinened and consisted of a permanent formwork in the underground floor and in the above-ground floor is clay masonry of the type THERM. A floor structure is designed as cast-in-place reinforced slabs. The building is roofed by saddle and pitched roof. The building is completely insulated with the ETICS system.
|
|
|
New apartment building
Křičenský, Adam ; Svoboda, David (referee) ; Čuprová, Danuše (advisor)
The subject of the bachelor’s thesis is the processing of the design documentation for execution of an apartment building. Designed building is located in Hrochův Týnec. The access to the building is from the south. The plot is flat and it disposes with parking places for nineteen cars. It is a building with three above-ground floors and partial basement that is designed with a total 8 dwelling units. The structural system of the designed building is wall system. All vertical structures are made of clay brick. The exception are external walls in the basement, that is designed of concrete blocks (permanent formwork). The horizontal structures are designed of prefabricated rib-and-filler floor that is made of ceramic concrete ceiling beams, ceramic inserts and overconcrete. The conection structure of the building is the cast-in-place reinforced concrete staircase. The roof is designed as a green flat roof in combination with the walkeble flat roof. The roof above the stairwell is designed as a non-walkeble flat roof. The thermal insulation of the whole object is made of the ETICS certified contact thermal insulation system. The apperance of the building is completed by facade colours that are selected in shades of white, light gray and dark gray.
|
|
|
Detached house with design office
Bartošek, Radim ; Šoulová, Eva (referee) ; Utíkalová, Ivana (advisor)
The aim of this bachelor´s thesis is a project of a new detached house with a design office at a level of the documentation for the structure realization. The detached house is situated in a small town Příkazy. The building is partly basement with one above-ground floor and a flat roof. The structural system of the basement part is made up of permanent shuttering and the ground part is made up of system SENDWIX.
|
|
|
Passive house
Majer, Filip ; Klubal, Tomáš (referee) ; Brzoň, Roman (advisor)
Bachelor’s thesis is focused on solving project documentation of new building of Passive building. Emphasis is laid on creating „airtight“cover of house which is achieved accuracy solutions to structural details, suitable selection of building and supplementary materials. An important factor in this issue is the massive use of thermal insulation materials. The project also focuses on the appropriate arrangement of renewable energy technologies and their applications.
|
guest ::
