|
|
Web Tool for Creation, Management, and Use of a Database of Sports Poses
Křivánek, Tomáš ; Tesařová, Alena (referee) ; Herout, Adam (advisor)
This paper is focused on two searching methods and how they can be used in any searching and in any web application. Two most important qualities of any search are speed and accuracy. One of the best methods in terms of speed is so-called live search. This method provides results immediately when the user starts typing their search expression. That is why in many cases, the user does not even have to finish their expression, because when seeing the result, the user can immediately access it. Search accuracy is often achieved by using keywords or some part of text. Another common way to organize and fetch documents are tags: a short string which identifies a post or a photo. Multiple tags are then used similarly to plain keywords. This work proposes to use tags as a new searching logical language, where presence and/or absence of tags can be required. For this purpose I created a simple logical language "Queries", because they can be used very similarly to database queries. In my case, the language and the user interface is made very simple so that a normal user can specify the query himself. This search tool is showcased in a web application focused around yoga poses. Both methods are used there -- the user can search in the yoga poses database by name or by the queries language.
|
|
|
Design of linear motor with permanent magnets
Čech, Jan ; Bulín, Tomáš (referee) ; Knebl, Ladislav (advisor)
The first part of this thesis deals with the study of linear motors. The introduction of the thesis deals with the brief description of the linear motor, including its accessories. This part explains principle of linear motors, their general advantages and disadvantages. The next section contains an overview and division of the currently used linear motors. Each type of currently used linear motors is briefly introduced and also its principle and characteristics are described, including its specific application. The second part of the thesis deals with the design of an equivalent magnetic circuit model of a linear iron-core linear motor. Hereafter, the proposed design will be used to simulate the distribution of magnetic flux in the linear motor. The evaluated flux-density distribution in the air gap is later compared with the results obtained with finite element method. The thrust is then calculated from the flux-density and the estimated value is compared with the value listed in datasheet.
|
|
|
Analysis of dynamic load from induction machine current signature
Pavláček, Jan ; Ondrůšek, Čestmír (referee) ; Huzlík, Rostislav (advisor)
This thesis focuses on the analysis of the dynamic behavior of the load from the measurement of stator currents of induction motor. Work is sorted from basic engine failures equations, mathematical models, types of signal processing, simulation and measurement. The practical part deals with the design of the motor model in Matlab Simulink, the simulated and the measurement of the pump BETA 12 YC On the Department of Fluid Engineering Victor Kaplan. Use appropriate types of signal processing evaluate the results. The aim of this work is to analyze the dynamic changes of the load.
|
|
|
MIL real time simulation of electrical motors
Bartík, Ondřej ; Veselý, Libor (referee) ; Blaha, Petr (advisor)
The goal of this thesis is how to implement the two different types of the electric alternate motors in ZYNQ-7000 device for MIL real-time simulation purposes. The chosen types of motors are BLDC motor and AC induction motor. Mathematics models of these motor, the necessary changes for implementation purposes and the way how the models were implemented in ZYNQ-7000 device are described in this work. Three different experimental MIL simulation, using these motors ae described at the end of this thesis.
|
|
|
Design and analysis of three-phase induction motor
Svoreň, Jan ; Skalka, Miroslav (referee) ; Vítek, Ondřej (advisor)
This project is focused to projecting and analysing the three-phase induction machine. It starts with introduction to principle functions of electrical machines and their design issues. The main objective is to develop a method to calculate and analysis a smaller machine. The design involves the calculation of the main dimensions of the machine, the calculation of the number and dimensions of the rotor and stator grooves and calculation of the stator windings. Designed machine is analysed by calculation and finite elements method.
|
|
|
Efficiency Improvement of Small Induction Motors
Vilím, Martin ; Veselka, František (referee) ; Hájek, Vítězslav (advisor)
In this bachelor´s thesis I discuss about asynchronous engines in general, describe their construction and principle of operation, using. It also includes measurements of a specific motor and design engine. The first part deals with theprinciple of the engine options including the fundamental control over speed and torque. The second part deals with the measurement of the size of the searchengine and losses. The last part provides a proposal for a new induction motor.
|
|
|
Classification of asynchronous motors
Čala, Václav ; Dušek, Jiří (referee) ; Singule, Vladislav (advisor)
This diploma thesis deals with a creation of a “Classification Document” of asynchronous motors with a short-circuit armature with axial heights of 355, 400, 450, 500, and 560 mm. Furthermore, it is concerned with a creation of an integral design documentation for the production and assembly of these motors at the company TES VSETÍN, s.r.o. By writing this diploma thesis I would like to achieve a simplification of communication with the customers during the processing of asynchronous motors orders and to speed up the processing of asynchronous motors orders not only in the design department but also the complete technologic preparation of the production which will surely be provided by this integrated documentation.
|
|
|
FEM model and simulation of induction motor with pole-changing winding
Záškodný, Jiří ; Ondrůšek, Čestmír (referee) ; Vítek, Ondřej (advisor)
This master thesis deals with calculations and simulations of multi-speed induction motors. In the first part, basic principle of these machines is described. Next, there are given three examples of pole-changing stator windings and their properties are analyzed (winding factors, magnetomotive force). Main part includes simulations and measuring of the specific motor, which is produced by company Siemens Mohelnice. This is the motor with 2/1 pole-changing in Y/YY connection. First, influence of skewed rotor slots on current and torque is analyzed. Next, parametres of motor from simulations are given and these results are compared to measured values.
|
|
|
Wireless Communication in Home Automation
Prokop, Michal ; Gutman, Jiří (referee) ; Hynčica, Ondřej (advisor)
This bachelor thesis is about how to make wireless communication network by IQRF technology which is intended for a home automation. It’s created by using DPA custom handler. This network can be made without programming thanks to DPA custom handler. This wireless network is realized by light model that is controlled by coordinator or by a button on a node. After that I measured latency and energy consumption on several various synchronous network and asynchronous network.
|
|
|
Modeling of torque-speed characteristics of induction motor
Michalík, Marek ; Chrobák, Petr (referee) ; Vítek, Ondřej (advisor)
This master thesis deals in first part with basic theory of an induction motor and principle of function. It also includes theory about higher harmonics of magnetic field and how asynchronous and synchronous torques are created. Various ways how to decrease effect of these torques are suggested. These findings are later applied in practical analytical calculation in second part, in which all parameters of motor are calculated from given dimensions of motor from technical documentation. This is done for basic and higher harmonics. After that a model of this motor was created in RMxprt program, which also calculated all parameters of this motor and created torque characteristic. This motor was also modelled in ANSYS Maxwell 2D. Additional simulations for finding out influence of harmonics on torque characteristic were also done in this software. Torque characteristic of motor was also practically measured in laboratory. All results were compared and evaluated.
|
guest ::
