|
|
Attendance System Terminal
Chmelař, Jakub ; Mráz, Ľubomír (referee) ; Strašil, Ivo (advisor)
This thesis deals with electronic attendance systems which are nowadays being widely used to record employee attendance. General problem of attendance tracking is introduced in first part of the thesis along with a conceptual solution of an attendance system terminal. Author then describes a circuitry and a PCB design of a baseboard for a Cubieboard2 minicomputer, a RFID reader and a touchscreen LCD display. After successful testing of said PCB, the terminal has been completed and it was possible to focus on a software solution. Latter part of the thesis is dedicated to a specifics of the Allwinner A20 platform and its support by a GNU/Linux operating system. In following chapter author describes use of a Buildroot software for creating a Linux based binary image for an aforementioned minicomputer. Since an operating system and a peripheral support were successfully tested author could focus on a design and implementation of an attendance software that is described in the final chapter.
|
|
|
To Dvur Kralove by train - Transfer Terminal in Dvur Kralove nad Labem
Livovská, Lucia ; Odvárka, Antonín (referee) ; Marek, Jiří (advisor)
The goal of the thesis was to create a transfer terminal for bus and train traffic which would reroute the entire local and intercity transportation into one spot closer to the city center. The plan is divided into three zones with each fulfilling its role by its location. A transfer bus and train terminal is conceptualized in the center of the of the building plot as the most prominent point. Administrative buildings are located to the south of the terminal so as to separate the building plot from the factory located underneath. Civic amenities are located north of the terminal which are used by the travelers and citizens from the area further north from the building plot. A small city park is located near this zone with respect to the large amount of greenery on the entire building plot.
|
|
|
Special induction machine as source of electric energy
Dušek, Jiří ; Janda, Marcel (referee) ; Skalka, Miroslav (advisor)
This work deals with description of an induction machine principles for both of motor and generator operations. Then is been described a special kind of an induction generator working into an isolated system. The construction of an induction generator was designed with two stator winding connection due to possibility of the variable number of pole pairs. Also there is an excitation capacity design for self-excitation. Last part of this work contains the measurement of an induction generator with different values of excitation capacity and both terminal clamps connection.
|
|
|
STEMLab based data acquisition system
Pavlík, Radim ; Kováč, Michal (referee) ; Kubíček, Michal (advisor)
Thesis deals with design of acquisition system, working on developing platform STEMLab (Red Pitaya). Goal is possibility of monitoring analog signals with adjustable sampling frequency and length of acquisition. Software was created for both controlling part (Python application) and for platform itself (embedded C, Python) using the appropriate FPGA-HW design (HDL). Thesis describe how to work with platform ecosystem, control and behaviour of aplications created during the proces of getting acquainted with the platform and options how aplications could be created.
|
|
|
Design of a contemporary city district in the environment of the historic city.
Landa, Karel ; Obrtlík,, Jan (referee) ; Májek, Jan (advisor)
The assignment of the diploma thesis was set to design new structure inside of historic city, which in the past went through major changes due to construction of main road leading through and dividing it to the 2 parts by creating a psychological barrier. This road was built mainly because of the construction of nuclear plant Dukovany to transit its part and component via this road. Simultaneously the thesis assignment was to design new bus station to replace existing one which is oversized from its completion and to incorporate this bus station to the life of the city. In my proposal I was creating the city structure by using principles set by historic structure of the city adapted to modern normative requirements while finding new genius loci of the area, which is in my proposal created by uncovering the Stařečka stream, which was hidden by construction of bus station. Next goal of the proposal was to improve possibility to walk faster through city by creating shortcuts and paths for the main and most important users of the city which are the people.
|
|
|
Call Center Process Automation Plan in ISO 9001:2000 Certified Organization
Hovadík, Jiří ; Liška, Jiří (referee) ; Dydowicz, Petr (advisor)
This master’s thesis deals with system of evidence customer requests in service organization. The introduction describes services activities in domain are focused on payment terminals and contemporary situation in call center. The suitable selection implementation tools are done. The second part contains the design of system for requests evidence and design of imports for service information system. The evaluation of the master’s thesis and some future improvements are presented.
|
|
|
Design and realization of wireless interface ODBII-XBee
Zatloukal, Martin ; Frýza, Tomáš (referee) ; Prokopec, Jan (advisor)
This master’s thesis describes possibilities of usage of ZigBee communication protocol and integrated circuit ELM 327 in problem of realization universal diagnostic device, running by OBDII communication standards, which can be used to monitor function of all car´s electronic systems. Thesis also deals with design and realization of necessary electro technical devices and modules followed by compilation of control software and experimental measurements of these devices in real traffic flow. In the first part of project, there are reminded some basic features and parameters of OBDII, followed by description of ways how to use OBDII and adumbrating how to realize universal diagnostic system. The analysis of ZigBee system focused on XBee circuits follows. Construction, ways of data transfer and possibilities of controlling are described. Integrated circuits produced by ELM Electronics Company are introduced and possibilities of usage ELM 327 are described as requested by main task. Second part talks about designing of electronic circuits of this system, assembling schematic diagram and designing sources for production of PCB. Physical realization of these circuits and its first start is also included. Thesis finishes by dealing with practical experiences and measurements using real vehicles. This part talks also about means to improve system by several software solutions to reach more effective functioning of created device.
|
|
|
To Dvur Kralove by train - Transfer Terminal in Dvur Kralove nad Labem
Zbellová, Zuzana ; Odvárka, Antonín (referee) ; Marek, Jiří (advisor)
The addressed region is divided into four territorial units. Every unit has a purpose given by its placement. In the first - the main transport area, train and bus transportation coming to the parcel meets and cumulates along the railway. There is a two-storey steel construction serving as a wrapper for terminal cells and as a skeleton for vertical park. Individual terminal cells are functionally divided into own building for bus and train terminal, and three other cells with complementary functions directly related to traveling. These four cells are playfully played in a linear construction and overgrown with greenery.
|
|
|
To Dvur Kralove by train - Transfer Terminal in Dvur Kralove nad Labem
Al-Gibury, Hanin ; Odvárka, Antonín (referee) ; Marek, Jiří (advisor)
The designed area is located in the heart of Dvůr Králové, near the river Elbe. Currently, the territory is built with objects that do not fulfill the required functions in the city. The design responds to the needs of residents and passengers in Dvůr Králové. In addition to the terminal itself, the area will offer opportunities for new jobs, housing, commerce and recreation. The vision of the design is not only to create a transport hub, but to return the city to life and create new job possibilities.
|
|
|
Parsing Based on Multigeneration
Kyjovská, Linda ; Přikryl, Zdeněk (referee) ; Lukáš, Roman (advisor)
This work deals with syntax analysis problems based on multi-generation. The basic idea is to create computer program, which transforms one input string to n -1 output strings. An Input of this program is some plain text file created by user, which contains n grammar rules. Just one grammar from the input file is marked as an input grammar and others n -1 grammars are output grammars. This program creates list of used input grammar rules for an input string and uses corresponding output grammar rules for the creation of n -1 output strings. The program is written in C++ and Bison
|
guest ::
