|
| |
|
|
Effect of acquisition site compression in multisite photoplethysmography
Hofrová, Lucie ; Kolář, Radim (referee) ; Janoušek, Oto (advisor)
The theoretical part of the thesis describes the pulse wave's origin, the principle of photoplethysmography, and the influence of vein compression on the morphology of the photoplethysmograph caused by external pressure during PPG signal measurement. Furthermore, the thesis contains the measurement and analysis of the PPG bilateral signal, which is used for the evaluation of whether there are differences between the PPG signal measured on the left or the right side of the human body. A dataset consisting of 10 volunteers was created for evaluation. The practical part contains the algorithm which analysis the PPG signal. Furthermore, normalization and statistical analysis is performed. The results show that external pressure has an effect on pulse wave width analysis and heart rate. When the pressure is high, the ability of pulse wave analysis is impaired.
|
|
|
Automation of measurement of directional characteristics of sound sources
Nimmerrichter, Benjamin ; Liska, Matej (referee) ; Schimmel, Jiří (advisor)
This bachelors thesis deals with the topic of automating the measuring of directional sound radiation characteristics of sound sources with the use of one to sixteen, possibly thirty-two microphones connected to an audio device, which supports the ASIO driver technology, which is connected to a computer with an installation of the MATLAB software. In the scope of this thesis a program was created, which is capable of measuring the 2D and 3D directional characteristics of sound sources and it can show the frequency spectrum of the signal. This work addresses the problematics of the effective value of discrete signals, calibration of microphones for measuring sound pressure level, the calculation and measuring of the level of acoustic pressure in dB (SPL), the autocorrelation of a discrete signal, plotting of the measurement in a polar or spherical plot and the calculation of the signal to noise ratio. This thesis contains a theoretical introduction to the measurement and to the propagation of sound, then the composition of the program and the measurement and an assessment of the measured results.
|
|
|
Calculation of the cyclist's power output based on data from shoe pressure insoles
Teturová, Iveta ; Smital, Lukáš (referee) ; Hrbotický, Lukáš (advisor)
Překlad abstraktu The Bachelor’s thesis deals with the question of utilizing pressure values measured by pressure inserts for calculating the performance of cyclists. Since this method has not been used in cycling before, the result of this work can be applied to expanding the methods of measuring performance in this sport in the future. The goal was to verify whether the use of this conversion is applicable in practice. This goal was verified by obtaining data during practical measurements, subsequent analysis of this data, and comparison of the results with other methods currently used for measuring performance in cycling.
|
|
|
Monitoring the living environment in the house
Dlugoš, Daniel ; Ježek, Michal (referee) ; Staněk, Kamil (advisor)
This work, tries to create a small, rechargeable and portable device that senses temperature, humidity, barometric pressure, dust particles, carbon dioxide and VOC concentration. The air quality monitor can reliably measure the physical quantities encountered in every indoor environment, evaluate them and display them to the user. The sensors, data storage module and OLED display are housed on a custom-made PCB board.
|
|
|
Pressure Sensors Based on Modern Nanotechnologies
Magát, Martin ; Hudec, Lubomír (referee) ; Vlach, Radek (referee) ; Vrba, Radimír (advisor)
This thesis describes utilization of a nanotechnology in new pressure sensors. Detailed analysis of individual principles are carrying on. And simulations and experimental models of sensors are developed. More detailed description is provided for new capacitive pressure sensor, which is manufactured using nanotechnology, including its model and analysis in order to improve its properties. The work deals with the emission pressure sensor which uses the principle of cold emissions, including analysis comparison of the measured values of the emission current from the applied nanotubes field and analysis to improve emissions performance.
|
|
|
Meteo weather station
Dvořák, Jiří ; Fajmon, Petr (referee) ; Fedra, Zbyněk (advisor)
The aim of this master‘s thesis is design and construction of home meteo weather station, the choice of applicable temperature, humidity and pressure sensors and characterization of workable device of station. The core of the station is microcontroller ATmega8 used for process data from sensors. Evaluative criteria for choice of sensors will be comunicate interface, accuracy, operating range, current drain and other aspects. Outer transmittin unit measure air temperature and relative humidity. These data are trasmitted by wireless radio module to interior receiving unit, that measure interior temperature and atmospherical pressure and represent measured data to LCD display including dew point. The data are transmitting to the internet and storing in the database. Measured values are available on the web page where you can display the graphs of last measured values.
|
|
|
Tyre Temper. Meauserement on Moving Vehicle with Use of Infrared Pyromether OS100
Morávek, David ; Rasch, František (referee) ; Blaťák, Ondřej (advisor)
Bc. David Morávek Tyre temperature measurement on moving vehicle with of infrared pyrometer OS100 MT, IAE, 2008, page 70, picture 41 Problemacy of recording the temperature and tyre pressure on driven car is processed in this diploma work. Suitable measuring chain was set up. Censor holders for this type of measurement were designed and produced. Driving exams and tests are depicted in this work, too. We came to the conclusion that tyre temperature depends on lengthways and transverse acceleration of the car and also on it’s load.
|
|
| |
|
|
Design and realization of the pull strength measuring device for SMD
Valíček, Jan ; Klíma, Martin (referee) ; Otáhal, Alexandr (advisor)
This thesis deals with the design and implementation of a device for measuring pull strength by surface mounted devices (SMD). It analyzes the theory of pull strength testing of solder joints with emphasis on standard IEC 62137-1-3 and describes the selection of components utilized to create mechanical construction and electrical parts. These electronic parts made or innovated in this work were control system based on microcontroler Atmega164P, power circuit for stepper motor and communication of measure equipment TEST 321 with PC. The whole design is complemented by simulation of mechanical stress to the critical components using ANSYS. The conclusion summarizes the most important parameters of this equipment.
|
guest ::
RSS feed.