|
|
Uncertainty of Indirect Measurement Determined by Monte Carlo Method
Novotný, Marek ; Havlíková, Marie (referee) ; Šedivá, Soňa (advisor)
This bachelor's thesis deals with determination of uncertainty in measurement, primarily with regard to the indirect measurement. There is theoretically analyzed and practically implemented calculate the uncertainty coefficient ent - speed multiple hole probe Annubar 485 in two ways. The first way is to calculate the uncertainty of the classical met-hod and the second one is the uncertainty using the Monte Carlo.
|
|
|
Processing of a continual blood pressure signal
Svobodová, Ivana ; Soukup, Ladislav (referee) ; Vondra, Vlastimil (advisor)
Bachelor thesis contains a general description of the blood pressure phenomenon and its importance and also deals with diseases, such as hypotension and hypertension. The work also includes a literature review of blood pressure measuring methods. Closely are discussed the non-invasive methods. The result of the work is also a unique program designed in Matlab, which is developed for signal processing of continuous blood pressure measurement for detection of SBP and DBP and MAP, pulse after pulse. To verify the functionality of the program, the further implementation was carried out in GUI. In conclusion, the obtained data are beeing analyzed statistically.
|
|
| |
|
|
Uncertainty of indirect measurement of air flow
Rozsypal, Jakub ; Havlíková, Marie (referee) ; Šedivá, Soňa (advisor)
This semestral project deals with the measurement uncertainties, especially with regard to indirect measurements. There are basic information about the issue. Then there is theoretically analyzed and practically implemented calculate the uncertainty volumetric air flow speed multiple hole probe Annubar 485 in two ways. The first way is to calculate the uncertainty of the classical method and the second method is the determination of uncertainty using Monte Carlo methods.
|
|
|
Programs for calculating measurement uncertainty using Monte Carlo method
Novotný, Marek ; Havlíková, Marie (referee) ; Šedivá, Soňa (advisor)
The thesis deals with establishing uncertainties of indirect measurements. It focuses primarily on random number generators in software enabling the calculation of mea-surement uncertainties using Monte Carlo. Then it focuses on the uncertainty calculati-on indirect measurement as the Monte Carlo method and the classical numerical met-hod. The practical part deals with the verification of randomness generators numbers contained in various softwares. It also deals with the determination of uncertainties indi-rect current measurements by both above-mentioned methods and then comparing and evaluating the values achieved.
|
|
|
Accuracy of the determination of liquid viscosity
Zikmund, Ondřej ; Rozsívalová, Zdenka (referee) ; Frk, Martin (advisor)
This master thesis is focused on the rheological properties of liquids, especially on the viscosity and the standard uncertainty. It explains methods of the viscosity measurement and the calibration selected viscometers, the principle of the determination of standard uncertainty by indirect measurement of the viscosity and the density. The main object of this thesis was to create a specialized centre for viscosity measurement and to create a document which could be used by teaching of diagnostics.
|
|
| |
|
|
Uncertainties Analyze of Indirect Measurement
Fišr, Petr ; Janečka, Jan (referee) ; Vdoleček, František (advisor)
This diploma thesis is engaged with problems of expressing measurement uncertainty especially for indirect measurements. This issue is shown here on a few simple examples. Part of this work is a calculation module for the determination of measurement uncertainties, applied to the role of the laboratory 'measurement of the flow orifice.
|
|
|
Indirect torque measurement in the output of load drive
Jelének, Marek ; Cipín, Radoslav (referee) ; Ondrůšek, Čestmír (advisor)
For loading of excavator drive units, it is necessary to use electromechanical loads with a high torque up to 16,000 Nm in a low speed range from 0 to 150 min-1 with a maximum output of 50 kW. The electromechanical load consists of an asynchronous dynamometer assembly with a tilting torque measurement system in conjunction with a front three-speed gearbox. The dynamometer is powered by a converter with vector control. To determine the torque at the gearbox output, a correction must be made and the influence of operating temperature and operating speed must be taken into account. Experimental measurement of these influences and dependencies makes it possible to create a mathematical model that can be implemented in the power converter for torque control at the output of the gearbox. The aim of the master thesis is a brief design of the loading drive, design an implementation of experimental measurement of efficiency maps and evaluation of the influence of inefficiency of gearbox efficiency.
|
|
|
The improvement of efficiency of three-phase induction motors
Vinkler, Stanislav ; Ondrůšek, Čestmír (referee) ; Vítek, Ondřej (advisor)
This work is dedicated to increasing the effectiveness of a particular draft induction motor, which was before the change and subjected to laboratory measurements according to EN60034 - 2-1, an analytical calculation of the losses and the overall efficiency and analysis program RMxprt. The first part focuses on the analysis of measurement data, measurement of partial loss in the machine and overall efficiency. In the second chapter, losses and efficiency calculated analytically, in the first case using the links in the professional literature dealing with the design of electric motors and in the second case by a program for the rapid design of rotating electrical machines, RMxprt program. At the end of this chapter all parameters are obtained measurements and calculations are compared. The third chapter is devoted to the calculation of losses and the resulting efficiency machines in a computer program, in which I gradually adopted changes to increase the efficiency of electrical machines. It also shows the calculation of the new dimensions of the stator and rotor slots. In the fourth chapter, the preparation of documentation for the production of a new two-layer winding for the current machine, while preserving the original dimensions of stator slots. The last part is devoted to the analysis of measurement data on the supplied asynchronous motor with a newly designed stator winding. In conclusion then discussed the results of work.
|
guest ::
