|
|
Electrical installation in family house
Tesař, Jan ; Procházka, Petr (referee) ; Ondrejček, Vladimír (advisor)
This Bachelor Thesis is concerned with the design of the electrical installation of a family house. There are two main parts of the thesis – theoretical basis and the main design. In the theoretical part the reader is at first introduced to a powerline section, in which the electrical installation from the powergrid to a terminal equipment is described. Next part is about a low voltage wiring, where the commonly used types of wiring and devices are described. In the third part the reader can read about a lightning protection and its inner and outer parts. The main design consist of situational designs of devices and wiring in the house, switchboard designs, revision of the electrical protection and the technical report.
|
|
|
Electrical installation of family house - implementing documentation
Hájek, Karel ; Morávek, Jan (referee) ; Mastný, Petr (advisor)
Main goals of this bechelor´s thesis are devided into three parts. First part introduces reader with power and data instalations issues including legislation necessary for project creation in electrickal engineering, object connection to distribution network, basic electric wiring including circuit breakers and electric wiring design in residential buildings, which mainly speaks about ways of installation of electric wiring and elektrical zones. In addition internal and external lighting protection and basic information about switchgear. Second part defines of project documentation creation, both design and text part. The last part is the practical part that looks into complete electrical installation of family house project, which contains marking both low-power and high-power circuits into plan view, house switchgear and electro meter scheme, LPS design and technical report with economical evaluation.
|
|
|
Project of wiring system with intelligent elements for family house
Lengyel, Ladislav ; Morávek, Jan (referee) ; Mastný, Petr (advisor)
The goal of this bachelor work was first of all the theoretical introducing to the project documentation and to the question of intelligent electrical installation. The first part of the bachelor work consists of terms and definitions of principles for creating the project documentation of electrical installation. With the view of the pages’ limitedness, it is not possible to describe in detail all the terms principles and standards used in creating of electrical installation. Because of that, the work focuses on the heavy current part of the technical documentation only. The next part of the work is focused on the question of intelligent electrical installation, its division and applicable possibilities in family houses. The advantages of the system installation in comparison to classical. In this part are further analyzed and described the different systems of different manufacturers of intelligent electrical installations. The closing part focuses on the blueprint of the project documentation of heavy current distributions. The distributions of the electrical installation for the family houses are realized with the help of intelligent elements from ABB company of the KNX system. This part furthermore focuses on the proper selection of system installation, placing of the distributions and elements of installations, inclusive of components of intelligent installation and a blueprint of subsidiary apartment distributer. Then it deals with the calculation of heat loss of the object and the selection of proper head pump related to it. With the help of determined power take-off the main breaker used in the apartment distributing board is appointed and the conjunction of the main residence wiring related to it.
|
|
|
Requirements and solution of household electrical installation
Zelenka, Michal ; Dostál, Lukáš (referee) ; Valenta, Jiří (advisor)
This bachelor‘s thesis deals with the electrical installation in a family house. The first part of this thesis serves as a basis for a project of electrical installation in the family house. The thesis presents the most important requirements for the household electrical installation in accordance with applicable czech technical standards. The thesis further describes the most important methods of protection, especially protection against overcurrent and protection against electric shock. The next part is devoted to proposal of specific project of household electrical installation in accordance with applicable technical standards. The project of the electric installation is checked by calculation at the end of the thesis.
|
|
|
Control of light sources in an intelligent installation
Kurzępa, Marek ; Huzlík, Rostislav (referee) ; Veselka, František (advisor)
This bachelor thesis focuses on the problem of the use of the intelligent installation, particularly the KNX system. The first section compares the concept of the classical and the smart installation. This comparison is later followed by a model example of the proposed solution of the control of lighting in a three storey house, especially in terms of the employed devices and their approximate price calculations. Further is introduced the principle of the function of the system KNX bus type TP1. The main aim of this work is the design and the implementation of the educational panel, familiarization with the software tool ETS4 and the presentation of its tools for the diagnosis of system KNX installation.
|
|
| |
|
|
Design of the implementation project for house's electrical installation
Pitron, Jiří ; Drápela, Jiří (referee) ; Mastný, Petr (advisor)
The thesis deals with the design and process implementation project for house's electrical installation. The first section contains a statement of the necessary legislation, which is intended for the proper construction of the project. The following are practical examples on how to connect the object to the distribution network, basic furnishing and electrical wiring protection, design of electrical distribution lines and zone location. Continuing this part of the object is to provide external and internal lightning protection. This chapter introduces the reader how to design a receiver system, whose ground leads. It also describes the use of internal lightning protection, surge protection devices. The second part of this thesis examines the use and installation characteristics of the active elements, which may afford some extras to man. In the third practical part author compiled project of realization of wiring a house, which includes drawing circuits, devices and equipment into the house floor plan, electrometer housing scheme and also includes design drawing external lightning protection and its deployment. There are also necessary technical documentation with the economic evaluation of the created object.
|
|
|
Computer control and programming of elements of intelligent electrical instalation KNX
Mašek, Jakub ; Baxant, Petr (referee) ; Bátora, Branislav (advisor)
The goal of this Bachelor thesis is to introduce to students the basics of working with the modern possibilities of buildings electroinstallation with the help of the KNX system. On the following pages is described a brief history of the system, the way it has developed, which organisations have involved in the developement and the needs for which it was created. The next section is focused on the system topology, the scructure of the network and important elements appearing in the decentralised system. Further is the thesis concerned with the principles of telegram communication, it’s process and available software support for the KNX system. The last practical part deals with programming in the KNX system and offers four different practical excercises created for the available laboratory control panel. Each of the excercises includes a problem, technical drawing of electical circuit and the problem analysis, which serves as a manual to solve the excercise step by step. Single excercises are designed to logically and by difficulty follow from lighting circuits, heating and cooling to eventually deleting and preparing the laboratory control panel for next lecture.
|
|
|
Protective measure - automatic disconnection of suply
Leitner, David ; Vaněk, Jaromír (referee) ; Valenta, Jiří (advisor)
The aim of this thesis is to explain the principle of automatic disconnection of supply, which is one of the basic protective measures for security assurance in electric installations of low voltage according to the new issue of Czech Technical Standard (ČSN 33 2000-4-41 ed. 2). Furthermore, the relevant clauses of the Czech Technical Standard in the new and previous issues are compared, with focus on the problem of automatic disconnection of supply in basic types of distribution networks. In agreement with theoretical conclusions, a project of electric energy supply system is proposed in the practical part of the thesis. Special attention is paid to showing the methods of modeling and verification of conditions for automatic disconnection of supply, with using control calculations in the SICHR program. Finally, the fulfillment of the conditions for automatic disconnection of supply is verified by revising the electrical supply system.
|
|
|
Tic-tac-toe game by 2D manipulator
Maléř, Martin ; Stibor, Karel (referee) ; Štohl, Radek (advisor)
This master’s thesis deals with the renewal of electrical equipment of 2D manipulator and putting it into operation. It contains a description of the machine, used components and their connections. It describes the principle of two communication buses, which are used for machine control. Next part is devoted to the safety analysis of the machine. Following chapters describe developing of a control program and designing of a visualization.
|
guest ::
