|
|
The Municipal Baths
Adamsonová, Kristína ; Javůrek, Radim (referee) ; Mikulášek, David (advisor)
ARCHITECTURE The centre and entrance point for atrection a relx is terace with pool, with corridor to cafe and skylights that leads to reception. Around this atrium, there is a ramp, rising up. Pools are not see n ko the screens are individual attractions, atmosphere. The height change of each pool, sauna and whether this involves physical effort is rewarded with open views to the surroundings and relax themselves. Entering the building through a covered, but bright bay, passage is a continuation of the street fishing. Thus the very end of the reception side. Thus eliminate the problem of a parcel which is like a scene out of town. Layout In the passages suggest leaving the car park, Kafe-bar with a simple menu and fresh multifunctional workshop, creative playground. It is known fact, that in the old spa locations to find valuable pieces of pottery, small painting and sculpture and other artifacts that speak of links with the vivacious work, relax, relax with a manual and spiritual. This room will also serve as a nursery for parents resting in the spa, in the specified date and time. Upon entering the spa itself, the reception with high ceilings and skylights from the terrace, the visitor to the issue of changing rooms with bathroom facilities. Consequently, the choice whether to receive the attractions, or go down to the fitness center or gym. Another option is to move the spa itself. In the direction from the top down it is pliable dough, the blood will get the opposite route, in which the visitor shall issue a physical effort. 2np In addition to coffee for guests only and exit to the terrace, and massage booths are located. Much of the area occupied by the technical room, spa bath as well as administration. On the next floor guest vystkytne a larger foyer, drinking KURO room and swimming and first aid. Glass facades can be glanced only in forests of the Riviera, but the atrium, with an outdoor terrace and heated swimming pool at all times. Foyer is the actual beginning of the journey. The first ramp is rising just from my father. All the dark hallway, followed by a bright and translucent glass facades. The key is just a wall bordering the ramps and a few additional columns for the perimeter of the building. About half a meter above (and always rises only about 500 mm, the gradient of 1:16 to 8 meters length), the visitor gets to the first pool. Sunny southern facade is designed as a double, at this point is the greenhouse, it is no wonder that the first two pools are linked to breathing, inhalation, nature herbs. The hall (+7400) is glass mat glass sanitary unit consisting of two toilets, toilets for disabled people and installation bay. On one front wall of the shower. This element is repeated, the cabin is only 2.6 meters high (sv room is 3.65 meters), it was acting to hinder lightweight and transparent. On the left side counterclockwise overcomes next ramp stages. Pools are right to counter a výrivý. In this part of the facade facing the street catchment area, the intersection of fishing and of 8 m of pools have already seen the two interface Brno: Petrov and Špilberk. There is also a visitor gets to escape-connecting staircase. Possibility of shortening the path to the sauna is right here. The following pool of options in turn draws the double facade. Studenúuvodu make cold, shielded, north-facing environment. Hot pool at a height level of hygiene cab ...
|
|
|
Color Changing of the Ceramic brick.
Kocmánek, Tomáš ; Zach, Jiří (referee) ; Nevřivová, Lenka (advisor)
The bachelor’s thesis is focused on color correction of brick body. There are examples of pigments commonly used in various industrial fields, as well as studies on the use of waste products as additives in brickmaking industry, altering, among other things, the color of the brick body. In the experimental part of the thesis the effect of three selected ferric pigments and two selected correction clays on the color and selected physico-mechanical properties of the brick body was investigated.
|
|
|
Algorithms in colour management
Stecík, Július ; Mach, Václav (referee) ; Rajmic, Pavel (advisor)
Thesis briefly discusses the issues of color perception and effects associated with it. Further describes color model and its mathematical definition, which are used by color management. Briefly analyzes important elements of ICC profile. In second part two java applications were designed and programmed. First one evaluates visible spectrum and graphically demonstrate procedure for obtaining trichromacy information from this spectrum. Second application analyzes ICC profile and derives gamut of described device.
|
|
|
Color Correction for 3D scanner and 3D printer
Kratochvíla, Michael ; Dorazil, Jan (referee) ; Říha, Kamil (advisor)
This thesis deals with color correction of a chain that starts with the 3D Artec MHT scanner, and ends with the 3D printers (CJP – Color Jet Printing technology). In principle, it is necessary to control the color interpretation of the entire chain from the scanning of real models to the 3D print model. With color properties and their color shade, including color textures. The principle of model surface scanning using a 3D scanner is in the same principle as photo camera which scans using a conventional CMOS chip. For this reason, color palettes were scanned using the photo camera and the resulting digital data were analyzed by the Darktable software. This analysis consisted of comparing the scanned color shades of the surface with the spectrofotometer measured data. The main goal of this method was to achieve color precision in the digital data during their acquirement, adjustment and interpretation. Then the same principle was applied to the data acquired by the 3D scanner to create an ICC profile of the 3D scanner. Because the 3D printer (CJP – Color Jet Printing) uses the same principle as the 2D printer, the 2D printing device calibration principle was used again to calibrate it. There have been defined procedures that adjust the color shade to the spectrophotometrically correct shades of the resulting print on a 3D printer. Color swatches were also printed for print quality verification. It has been found that with photo camera, which was used for objective measurement in the L*a*b* coordinates of independent space, any color setting and their adjustment is very sensitive to even small imprecisions. It has been found that it is not easy to obtain accurate colors within the Detla E
|
|
|
The influence of tomato ketchupes production technology on retention of nutritionally significance ingredients
Smolka, Bronislav ; Voldřich, Michal (referee) ; Ing.Helena Čížková, Ph.D. (advisor)
The work was focused on the verification of influence of quality of raw material and time-temperature conditions on the retention of nutritionally and sensory important components of the ketchups and other tomato based products. The goal of the theoretical part of this diploma thesis was the optimization of procedure of Czech tomato cultivar selection according to the highest refraction and intensive red colour. The influence of tomato ketchups production technology on retention of nutritionally significant ingredients was observed within the practical part. The samples of ketchups were sampled during different steps of production within one batch in company OTMA Sloko Mařatice. It was ketchup which was preserved by pasteurization in the glass bottle and ketchup which was preserved by hot filing to the plastic bottles. The content of lycopene, ascorbic acid, colour, viscosity, refraction and pH were measured in those samples. Furosine had been chosen as marker of thermal stress on material. The technologies can be compared on the basic of measured values from the view of retention or changes of nutritionally and sensory important components.
|
|
|
Beer bioflavouring by dry hopping using czech cultivars of hops
Gajdušek, Martin ; Štursa, Václav (referee) ; Pořízka, Jaromír (advisor)
This diploma thesis deals with the influence of dry hopping on selected analytical and sensory properties of beer. The effect of dry hopping was observed using Czech hop varieties Kazbek and Uran, which were added to the wort during the main fermentation phase in doses of 3 and 6 gdm-3. The contact time of hops with wort was 3, 6 and 9 days. The experimental part describes the technology of preparation of the reference beer, in which dry hopping were subsequently performed. A parallel measurement was performed on each sample. In terms of the basic parameters of beer, the effect of dry hopping, especially its length, on the ethanol content was observed. With a longer period of dry hopping, the concentration of ethanol in beer increased. The higher alcohol concentration was also associated with a decrease in the apparent extract. In terms of color and pH of beer, the effect of dry hopping has not been proven. Elemental analysis performed by optical emission spectrometry with inductively coupled plasma revealed an increase in the concentration of calcium, magnesium, and iron due to dry hopping. No statistically significant difference was observed for manganese and barium compared to the reference. In terms of bitterness, a significant increase was identified in dry hopped beers compared to the reference, the value being dependent on the dose of hops used. The effect of the hop variety has not been proved. Concentrations of organic acids determined by ion-exchange chromatography with a conductivity detector were affected by dry hopping only in the case of lactic acid and acetic acid. An increase in lactic acid was observed compared to the reference, also related to the degree of fermentation. While in the acetic acid content the hop samples showed a lower concentration than the reference sample. The concentrations of myrcene, humulene and geraniol were determined by gas chromatography with a mass detector. These are volatile components of hop essential oils. Dry hopped samples recorded significantly higher concentrations of all aromatic substances compared to the reference. In terms of hop time, the highest concentrations were shown by samples hopped for three days. The results of the sensory analysis show that the overall best rated sample is a sample hopped with the Kazbek variety with a dose of 3 gdm-3 for three days. Beer which was dry hopped for the shortest time also showed the lowest intensity of bitterness, which was perceived positively.
|
|
|
There's black and white, day and night, good and evil, yin and yang. It all just balances itself out.
Ilič, Risto ; Kořínková, Jana (referee) ; Mazanec, Martin (advisor)
The bachelor's thesis "There's Black and White, Day and Night, Good and Evil, Ying and Yang" follows the three-year existence of the collective "Ugly Brno" and its work, which is based on the still current, local phenomenon of redesigning of advertising banners and shields in the context of small businesses located in the Brno city center. Specifically, it focuses on emerging designs combining black and white. The output of this bachelor's thesis is a video – a fictional interview in which Black and White are personified as two confident, eccentric personalities, quasi-experts in today's visual culture and the ultimate guarantors of taste, who conquered the city of Brno with their realizations. The objective of this thesis is to reveal the mythology behind the popularity of black and white combination in the context of visual culture, particularly in graphic design and its connection to the problematics of gentrification and capitalism. Another objective is to use sarcasm and irony to create a reflection of a culture whose values are elitism, workaholism, perfectionism, disregard for alternatives and an emphasis on efficiency. Why is it that in such a culture, black and white has gained more and more popularity than ever before?
|
|
| |
|
|
Gamut mapping algorithms in color management
Svoboda, Jan ; Říha, Kamil (referee) ; Rajmic, Pavel (advisor)
The thesis deals with colors - their representation in digital devices and how to provide the best color preservation accross different devices. In the first part of the work, the knowledge of colors and human vision is briefly summarized. Then color models and color spaces are elaborated, mainly those device independent. Spectrum of colors viewable or printable on a device - the gamut - is different for every device and there's a need of precise reproduction or record of color. That's why the system of color management is described further and especially the gamut mapping approaches and algorithms are mentioned. In the second part of the work, the implementation of how two algorithms of color gamut mapping (HPMINDE, SCLIP) can be implemented in MATLAB is described. In the third and last part of the work, the results of implemented algorithms are presented and discussed. These results are compared to results of commonly used color gamut mapping technique (Adobe Photoshop).
|
|
|
Temples
Pokorná, Pavlína ; Horálek, Vojtěch (referee) ; Malý, Břetislav (advisor)
The bachelor's thesis, entitled Temples, consists of a set of paintings that the author perceives metaphorically as personal inner temples. The inspiration for the author was nature, which she considers a temple of its kind. The title of the work comes from the symbolism and artistic typification that are used on Japanese traditional clothing - Kimono. The series of paintings is not only inspired by nature and its motifs, but also freely paraphrases elements from textile design - such as shapes or repetitions.
|
guest ::
