|
|
Exotarium ZOO Brno
Kučera, Jiljí ; Wittmann, Maxmilian (referee) ; Šindlar, Jiljí (advisor)
The topic of the bachelor thesis is the design of a pavilion for the Australia - New Guinea exhibition in Brno Zoo. The building serves mainly as an exposition and home for exotic species of birds, small mammals and fish. The building should meet all the conditions of buildings for the public, working conditions for employees and animal welfare. The area under consideration is located in the premises of the Brno Zoo, in the northern part of the district of Bystrc. The construction site is located roughly in the middle of the zoo at the crossroads between the Tropical Pavilion and the African Village. The relatively sloping, irregular plot is accessible from the north and east sides by a campus road. The kangaroo enclosure is directly adjacent to the west side, while the bison and camel enclosures are located to the north, across the road. The resulting design consists of a two-storey building that follows the contour line of the site. It is a building composed of two regular masses of rectangular plan. The upper smaller mass is superimposed on the lower larger mass. The pavilion includes indoor and outdoor aviaries, terrariums, aquariums, staff facilities, animal facilities and food preparation. The facade of the Exotarium imitates the red rock typical of Australia. It is made up of an ETICS system to which a moulded polystyrene layer and a painted surface will be added. An extensive green roof with aviaries is proposed on the main building. The design includes a small plaza to provide shade for visitors. Two buildings are proposed within the square - refreshments and public toilets. The bachelor thesis is based on documents in the form of assignment, dwg drawing of the cadastral situation and architectural study from the course BGA036 - Architectural Atelier 5.
|
|
|
Zoos as socially constructed institutions in changing social and territorial contexts
Nekolný, Lukáš ; Fialová, Dana (advisor) ; Šantrůčková, Markéta (referee) ; Boltižiar, Martin (referee)
This dissertation deals with research of the zoo as a social construct, which in its history and form represents the development of the relationship between society and nature, or man and animals. At the same time, it is a specific cultural landscape reflecting other changes in paradigms and needs in society. The current form of zoos has always reflected various economic, political, environmental and cultural aspects, or opinion and spatial changes of society. This work is a contribution to the discussion of the application of thematization typical of contemporary experience-oriented society. The aim of the thesis is to characterize the development of zoos and their current form in Europe, where this concept originated at the turn of the 18th and 19th centuries, and to discuss regional differences regarding the different geographical context of the post-socialist space. From the geographical point of view, this is a topic rarely addressed so far, both from a theoretical (the zoo as an example of the specific landscape) as well as a regional approach. The first part provides a theoretical framework by means of a discussion of scientific literature and formulating the starting points of the research based on selected concepts and paradigms (social constructivism, the relationship between man and...
|
|
|
Design and implementation of a control unit for the aquarium environment
Petrák, Lukáš ; Formánek, Martin (referee) ; Krejčí, Petr (advisor)
This bachelor thesis deals with the design and implementation of a prototype control unit for controlling the internal environment of an aquarium. The aim of this work is to create a device that will control the aquarium lighting using available LED strips of different colors, as well as maintain the aquarium water temperature within the range set by the user. It will then record on an SD card the progress of the lighting, the water temperature from the three sensors and the time when these values were obtained. These measurements can be retrieved and the device can be controlled via a web interface from a standard browser. The device should realizable from commonly available modules and components and its parameters should satisfy both the beginner and the advanced aquarist who, from the analysis of the measured values of the aquarium's internal environment, will adjust the control unit according to his needs.
|
|
| |
|
|
PH controller for aquarium
Dvořák, Jan ; Fedra, Zbyněk (referee) ; Šebesta, Jiří (advisor)
This bachelor’s thesis deals with the system which is designed as a pH regulator for aquarium water. The first and second chapter are aims to the basic requirements and possibilities on controlling of the potential of hydrogen in water. Main methods of the pH measuring, its controlling and regulation are included. The third chapter presents a design of the pH regulator system. The practical and software solution of this project is presented in the fourth and fifth chapter. There are described in detail the main blocks of the pH regulator - amplifier, galvanic isolator and output power stage. The results of the testing and measuring of the designed subsystems are introduced in the last part of the work.
|
|
|
Microcontroller based aquarium control system
Gothard, Adolf ; Štohl, Radek (referee) ; Bradáč, Zdeněk (advisor)
This bachelor‘s thesis deals with design of automatic aquarium control system, equipped with microcontroller AT89C51ED2 and simple user interface. After opening introduction to systems, usually used for aquarium automation, there is described design of such device. First, it is selection of components and concept of their electrical connections. Next part is devoted to realisation and found problems and their removing. The last part is devoted to design and creation of program equipment of the control system. This part shows basic principles of control program and structure of it’s main parts. Low-level functions for communication with peripheral devices are also described.
|
|
|
Automated environmental support system for aquarium
Slavotínek, Jan ; Honec, Peter (referee) ; Petyovský, Petr (advisor)
The thesis is devoted to analysis of parameters and processes in aquarium, in order to design system for control, regulation and monitoring the most important of them. In theoretical part of thesis are defined terms and basic knowledge necessary for successful analysis, some of them are marginally reaching into different science discipline (biology, zoology, engineering, etc.). The thesis contains a part focused on analysis of common operation and requirements connected with prospering aquarium. In this part are determined common ranges of values, limitations and requirements on safety operation of system, if necessary. Following chapters of thesis are devoted to design hardware and software solution of particular system, ensuring control, regulation and monitoring of variables and processes determined as critical.
|
|
|
Design of a complex automated system for aquarists
Hedvíček, Michal ; Kunz, Jan (referee) ; Uher, Miroslav (advisor)
Thesis deals with the theoretical design of an automatic control system for the aquarium and following simulation software environment Proteus ISIS. Due to simulation program can verify the behavior of the microprocessor in the specified functions, the correctness of electrical connections and errors in source code. The second part is analysis of commercial systems, their characteristics and applications. Apart from available commercial systems, there is a basic overview of commonly used peripherals in the aquarium, including their comparison and evaluation. Furthermore, the implementation of a complex system is done and the procedures and methods needed to set up the system are described. This topic also deals with cooling and reliability tests.
|
|
|
Production of aquariums Brno Pavlica
Chrobák, Milan ; Kotek, arch Jakub (referee) ; Boleslavská, Yvona (advisor) ; Bečkovský, David (advisor)
This bachelors final project is based on an atelier project of the sixth semester of the bachelors study program of architecture of civil engineering. This project is based on the original design. The task was to design an object suitable for production and show of large-sized interior aquarias made by company PAVLICA Akvária, originaly located in Uherský Ostroh, and its administration. The plot, where the object has to be located, is labeled as brownfield no. 0811. This area is situated in Horní Heršpice, Brno. Designed object respects the surrounding terrain and copies it with its staging volume. The building is reflecting personal and profesional approach of the company to every contract. The building is two-storey. On its ground floor, there is situated showroom for presetation of company and for event happenings. On the second floor, there is administration offices, staff facilities, support areas, production itself including stock.
|
|
|
The system for regulation of the environmental conditions in the aquariums
Janda, Josef ; Jaroš, David (referee) ; Macháň, Ladislav (advisor)
This thesis project describes the design and construction of an automated system for maintaining live conditions in aquarium. The main purpose of the system is to automate certain procedures and to ensure control of important environmental parameters of artificial breeding of aquarium animals and plants. The device regulates lighting, temperature, CO2 concentration and other parameters. The LCD with touch screen is used to system control and to display measured values.
|
guest ::
