|
|
The influence of alcaline accumulators loading on their parameters
Čech, Ondřej ; Vrbický, Jiří (referee) ; Sedlaříková, Marie (advisor)
This master's thesis deals with alkaline battery characteristics and it has special consideration of nickel-cadmium cells. There are three main experimental parts in this paper. First one is concerned with positive electrode materials properties and is aimed to investigate impact of magnesium ions formed into nickel hydroxide electrode structure. Second part deals with battery charging/discharging and response measurement tool design. National Instruments hardware PXI modules for data acquisition was used and program in LabView environment was made. Last one is concerned with nickel-cadmium cell properties changes during increased temperature stressing. Investigation of cell self-charge changes during lithium hydroxide addition into electrolyte was made.
|
|
|
Fuel for internal combustion engines
Vrbický, Jiří ; Jedelský, Jan (referee) ; Štětina, Josef (advisor)
This thesis is concerned with basic features of fuels for internal consumption engines, especially their influence on thermal efficiency. It also introduces dividing of fuels and their compare in ecologic, economic and technologic side. It is concerned convectional fuels (gasoline, diesel oil) and alternative fuels (nature gas, bottled gas, hydrogen, biodiesel, biogas, methanol and ethanol).
|
|
|
Properties electrodes materials for alcaline accumulators
Řihák, Lukáš ; Vrbický, Jiří (referee) ; Sedlaříková, Marie (advisor)
This thesis is involved in basical properties of electrode materials for alkaline accumulators. This thesis describes the possibilities of capacity stabilisation of nickel electrode to be stable for highest number of cycles. Thesis also consider modification of properties of electrode materials on the base of nickel hydroxide by using dopes (aluminum, manganese). Measuration proceeded on the thin film electrodes created by electrodeposition. Measuration of properties of electrodes proceeded by cyclic voltammetry and frequency analyzis.
|
|
|
Design of air conditioning system of a flat
Vrbický, Jiří ; Zerzaňová, Alena (referee) ; Hejčík, Jiří (advisor)
The diploma thesis is consisting of theoretic part, which deal with used ventilating systems, ways of waste heat recovery and describe basic types of air-conditioning systems. Following part attend to design of ventilating system and multi-split air-conditioning system for flat. Part of design of ventilation system is calculation of noise levels in rooms. Air-conditioner design is based on calculation of thermal stress. Annual demand of cold and heat demand are calculated using TRANSYS software. Design documentation is part of the diploma thesis.
|
|
|
Influence of Al ionts in nickel hydroxide on behaviour of electrodes
Růžička, Tomáš ; Vrbický, Jiří (referee) ; Sedlaříková, Marie (advisor)
This master's thesis is concerned with the influence of aluminate ions added in various concentrations into the structure of nicel hydroxide that creates Ni-Cd accumulators positive electrode active mass basis nowadays. Nicel hydroxide occurs in two basic modifications ? and ß. Nowadays used ß modification reaches low capacity in comparison with ? modification. The disadvantage of ? modification is its instability and gradual degradation to ß modification. The aim of this diploma paper is to select the optimal amount of aluminate additives into the structure of nicel hydroxide with regard to electrochemical efficiency, stability, and degradation degree of the accumulated layer.
|
|
| |
|
| |
|
| |
|
|
Influence of Mn ionts in nickel hydroxide on behavour electrodes
Cirkovský, Jaroslav ; Vrbický, Jiří (referee) ; Sedlaříková, Marie (advisor)
The aim of my diploma thesis was to explore the influence of manganese ions put into nickel nitrate structure. The attention was focused mainly on the stabilization of nickel nitrate a modification, which could not change into b modification. The theoretical part of my thesis focused on applied materials, kinds of acumulators, basic parameters of acumulators and the description of chosen methods of measurement employed. It contained the electrodeposition, the impedance spectroscopy and the cyclic voltammetry. The task of the experimental part was to measure the effect of manganese ions put into potassium hydroxide structure. Proportions of Ni (nickel nitrate) : Mn (manganese nitrate) 10:0, 7:3, 5:5, 6:1 and 6:4 were blended for the measurement. By means of the electrodeposition, there was a thin layer of nickel hydroxide with an admixture of manganese ions from nickel nitrate and manganese nitrate dilution put on the nickel plate. After the spread of the thin layer on the nickel plate, the measurement by the method of cyclic voltammetry followed. The next task consisted in trying to add KOH (potassium hydroxide) anionic and cationic surfactant into the dilution.
|
|
|
New electrode structures for alkaline accumulators
Fusek, Petr ; Novák, Vítězslav (referee) ; Vrbický, Jiří (advisor)
Master´s thesis is focused on development of electrodes used in alcaline accumulators, by using new kinds of materials and compounds. Basic possitive eletrode was made of nickel, on this electrode were applied new layers of Ni(OH)2 by using the method called electrodeposition. For electrodeposition was used solution with Ni(NO3)2 in diverse concentrations. Later on, this material was enriched with aluminium admixtures to increase stability of alfa modification in Ni(OH)2. These concentrations were measured and analysed in diagrams. For measurement was used device Biologic. The diagrams were commented with recommendations for production use in accumulators.
|
guest ::
RSS feed.