|
|
Facilities of football club
Stuchlík, Jan ; Utíkal, Aleš (referee) ; Utíkalová, Ivana (advisor)
Topic of diploma thesis is new building of football club facility in Šternberk. This thesis should fully cover all the requirements for documentation for building construction. Object is designed as a three storey building, basement included. Just half of the basement is actually in contact with the soil. There is also tribune designed from prefabricated elements connected to the building as a part of the project. The whole building is designed as a masonry building from Porotherm system with external wall from thermo insulation blocks, monolithic ceilings and the flat roof. The basement floor is design for thy gym and facilities connected to that such as dressing rooms, showers, toilets, sauna, jacuzzi and massages. You can find reception, buffet with the toilets and the dressing rooms for home team, away team and referees on the first floor. The second floor is divided to two parts. One as apartment and the second as administrative part for the club management.
|
|
|
New construction of block of apartments A1, at Slavkov u Brna - Preparation of the realization construction
Stuchlík, Jaroslav ; Hanzelková, Martina (referee) ; Šlanhof, Jiří (advisor)
This Thesis deals with the organization of realization of the residential building A1 Slavkov u Brna. Thesis solves mainly technological process of realization of the main object. The thesis aims to develop a time schedule of execution, usage of mechanisms timetable, material resources, technological regulations, inspection and test plans. The annex also solved graphically construction site facility set up and its modifications during execution depending on different type of works. This Thesis is based on realization project provided by the realization company and with consent of project designer.
|
|
|
Mobile Wood Splitter
Stuchlík, Jakub ; Malášek, Jiří (referee) ; Škopán, Miroslav (advisor)
This bachelor´s thesis deals with the issues of the mobile wood splitter. The first part describes the basic division of splitters in the market. I am going to choose the most suitable solution for my assignment. In the second part I am going to focus on the calculation of strength and checking of chosen type of the splitter.
|
|
|
Detached house with design office
Stuchlík, Jan ; Jelínek, Petr (referee) ; Utíkalová, Ivana (advisor)
This project designs a new building of a family house with design office. The building is single-storey with residential loft, without a basement part. The entire ground floor is design for living. In the house is garage for two cars. This project also designs parking slots and pavements.
|
|
|
Nanopositioning with detection of a standing wave
Holá, M. ; Hrabina, J. ; Číp, O. ; Fejfar, Antonín ; Stuchlík, Jiří ; Kočka, Jan ; Oulehla, J. ; Lazar, J.
A measuring technique is intended for displacement and position sensing over a limited range with detection of standing-wave pattern inside of a passive Fabry-Perot cavity. In this concept we consider locking of the laser optical frequency and the length of the Fabry-Perot cavity in resonance. Fixing the length of the cavity to e.g. a highly stable mechanical reference allows stabilizing wavelength of the laser in air and thus to eliminate especially the faster fluctuations of refractive index of air due to air flow and inhomogeneity. Detection of the interference maxima and minima within the Fabry-Perot cavity along the beam axis has been tested and proven with a low loss transparent photodetector with very low reflectivity. The transparent photodetector is based on a thin polycrystalline silicon layer. Reduction of losses was achieved thanks to a design as an optimized set of interference layers acting as an antireflection coating. The principle is demonstrated on an experimental setup.
|
|
|
Restaurace s příležitostnou hudební produkcí
Stuchlík, Jan
The intention of this thesis is to design and develop the necessary technical documentation for a wooden restaurant with occasional music production. The restaurant is divided into a smoking section and a non-smoking section, in which there would be the room for the occasional musical production. The restaurant is located on the outskirts of Kopřivnice on a gentle slope and is partially embedded in it. The underground part of the building is made up of a suitable masonry material. The skeleton of BSH prisms forms the bearing structure of super terrestrial part of the restaurant. The peripheral shell of the building is non-bearing. The majority of it will be glassed with isolating triple-glass and in addition with diffusely closed wall construction system. The building is provided with the flat vegetation roof. Finally the price of realization is specified
|
|
|
The optical spectra of carbon-based thin films measured by the photothermal deflection spectroscopy (PDS)
Remeš, Zdeněk ; Pham, T.T. ; Varga, Marián ; Kromka, Alexander ; Stuchlík, Jiří ; Mao, H.B.
Our photothermal deflection spectroscopy (PDS) setup allows to measure simultaneously the absolute values of the optical transmittance T, reflectance R and absorptance A spectra of thin layers on glass substrates in the spectral range from ultraviolet to near infrared light with the typical spectral resolution 5 nm in the ultraviolet, 10 nm in visible and 20 nm in the near infrared region. The PDS setup provides the dynamic detection range in the optical absorptance up to 4 orders of magnitude. Here we demonstrate the usability of this setup by comparing the optical absorbance on a series of the carbon layer and nanocrystalline diamond (NCD) thin layers deposited on glass substrates by using the magnetron sputtering and the microwave based surface wave discharge in linear antenna chemical vapor deposition (CVD) processes, respectively. The defect-induced localized states in the energy gap are observed in all carbon layers as well as in NCD.
|
|
|
Comparativ study on functionalization of NCD films with amine groups
Artemenko, Anna ; Kozak, Halyna ; Stuchlík, Jiří ; Biederman, H. ; Kromka, Alexander
Nanocrystalline diamond (NCD) films are considered as highly attractive material for biosensing due to its unique semiconducting properties. This can be achieved by modification of NCD films surface on molecular level. Typically chemical immobilization of biomoleculs requires the presence of active functional groups on the diamond surface. This was achieved by attachment of -NH2 functional groups on the surface of H- or O-terminated NCD surface via two plasma-based processes. The first process, deposition of thin amine containing polymer by RF magnetron sputtering of Nylon target in Ar/N2 gas mixture. The second process employs RF plasma treatment in NH3 for 10 minutes. Chemical derivatization (CD) XPS analysis revealed that polymeric coating exhibits a higher amount of amino groups than the diamond surface treated in NH3 RF plasma. Results of I-V measurements showed that surface conductivity of H-terminated NCD films was preserved only after the RF sputtering.
|
|
| |
|
| |
guest ::
RSS feed.