|
|
Design of Hydraulic Power Shift of the TATRA Truck
Pončík, Jakub ; Janoušek, Michal (referee) ; Prokop, Aleš (advisor)
The aim of this master´s thesis is design of hydralic power shift for transmission Tatra 14TS210L. The master´s thesis contains a description of the individual power shifts used by Tater as well as other truck manufacturers. This is followed by a design concept of the power shift, including FEM calculations of the shift inches and piston rods. Part of the work is also production drawings of the body of the power shift and piston rod.
|
|
|
Design of direct shift gearbox
Kliš, Vojtěch ; Prokop, Aleš (referee) ; Řehák, Kamil (advisor)
This thesis deals with the conceptual design of a double clutch gearbox and the inspection of selected designed parts of this gearbox. The first part of the thesis is focused on the theory of automotive transmissions and analysis of already available double clutch gearboxes. The following is the conceptual design itself, which is based on the selected vehicle on which the transmission will be located and on driving resistances. Based on these default values, the gear graduation is selected, which affects the vehicle’s driving dynamics. With regard to the installation space, a conceptual arrangement of the gearbox is proposed. Furthermore, the thesis is focused on the basic design and calculations of individual functional components of the gearbox. The last part of the thesis is involved to the control of selected structural nodes using the finite element method in the ansys workbench software. The whole thesis describes the individual steps for the design of the basic concept of a double clutch gearbox and the design of their basic components.
|
|
|
Mechanical design support of tractor’s cabin
Prokop, Aleš ; Laurinec, Marián (referee) ; Ambróz, Richard (advisor)
This Bachelor's thesis deals with the mechanical design support of tractor’s cabin. This work includes detailed versions of support and absorption of tractor’s cabine that are sold in the Czech Republic. The distribution is made in accordance with elements that appear in given concepts. This work contains solution of self construction concept of the placing with the help of mechanic dumper.
|
|
|
Computational Modeling of Gear Mesh Engagement Dynamics by MBS Approach
Pykal, Vojtěch ; Řehák, Kamil (referee) ; Prokop, Aleš (advisor)
This master’s thesis is focused on the compilation of a computational modelling of gear mesh engagement dynamics of a spur gear by MBS approach. The user input is the specific geometry of gears, the operating speed, and the load torque. The output are the forces in the gear engagement and the reaction of the forces in the wheel bearings depending on the change in the stiffness of the gear due to the changing number of teeth in the engagement and the change in the axial distance. This model is characterized by a fast and relatively accurate calculation in the time domain. This means that it can react to changes in parameters during simulation such as axial distance, speed, and torque.
|
|
|
Design of direct shift gearbox
Kocman, František ; Prokop, Aleš (referee) ; Řehák, Kamil (advisor)
This thesis deals with the conceptual design of a dual clutch gearbox and with inspection of selected parts of this gearbox. The introductory part is devoted to their theoretical description and subsequent analysis of current dual clutch gearboxes. Then the work focuses on the conceptual design itself, which is based on the chosen vehicle. On the basis of these inputs, the gearbox gear ratios are chosen, which have impact on the economy of the vehicle operation. With respect to the installation area, its conceptual layout is then proposed. Furthermore, this thesis deals with the basic structural design and calculations of selected functional parts of the transmission. The last part of this thesis is devoted to the inspection of selected structural nodes using the finite element method. This whole thesis describes the individual steps of the basic conceptual design of the dual clutch gearbox and the design of their basic components.
|
|
|
Formula Student Fuel System
Šebela, Kamil ; Prokop, Aleš (referee) ; Janoušek, Michal (advisor)
This thesis deals with construction fuel system for Formula Student vehicle. Thesis is divided into three parts, where first part deals about research about Formula Student competition, materials for fuel tanks, fuel system main parts and rules for fuel system. Second part deals about testing endurance for resin and filler against E85 fuel. Third part deals about manufacturing composite fuel tank, fuel system main parts and application fuel system into vehicle.
|
|
| |
|
|
Test Rig Design Proposal for the Experimental Validation of Transmission Parameters in Closed Loop Torque Condition
Otipka, Václav ; Řehák, Kamil (referee) ; Prokop, Aleš (advisor)
The thesis deals with the design of the experimental testing rig. Test rig is designed to measure NVH transmission parameters. First, basic knowledge of vibro-acoustic measurement is discussed. This is followed by an evaluation of the most commonly used power devices to derive real loads on measured gearboxes. In more detail, a back-to-back test rig is disassembled among other things. In the thesis are described two main components, which are composed of a connecting element and a test bench. Both components were optimized during the design due to their modal properties. Numerical modal analysis was performed in ANSYS Workbench software. The thesis also includes strength calculations performed using both numerical and analytical approaches. The indispensable result of the design work is the complete drawing documentation. Finally, measurements of vibrations and noise on the physically made connecting element assembly have been performed and subsequently evaluated.
|
|
|
Tractors brake systems
Pazour, Martin ; Prokop, Aleš (referee) ; Ambróz, Richard (advisor)
This Batchelor’s thesis deals with an overview of the contemporary brake system of tractors. Principles and constructions of brake systems will be described in this thetis. Then the braking dynamics will be analyzed and convenient brake system for tractor up to 90kW will be projected.
|
|
|
Design of a test condition for determining the wear at the contact of a railway wheel and rail
Rec, Matouš ; Prokop, Aleš (referee) ; Řehák, Kamil (advisor)
This diploma thesis focuses on the issue of a wear of a railway wheel and a rail. The wear of the components depends on a number of parameters including the contact stress, the contact pressure and the contact surface dimensions. Among the factors determining these parameters belongs primarily the wheel driving gauge, the rail profile and the load of the contact area. Furthermore, the material from which the wheels and rail are made, the roughness and hardness of the functional surfaces and the residual stress in the material have a significant impact on the wear. All the parameters mentioned above are designed for the production of the railway wheels and rails and therefore they meet the standards for the production of these components. However, the existence of the changeable parameters has also a significant impact on the wear. These parameters include the presence of contaminants, or lubricants in contact, the changing driving gauge due to the wear, the slip ratio or the friction coefficient. With the wear being an inevitable process during the application it cannot be eliminated but only controlled. Applying the lubricant into the contact when passing through the arc in order to achieve an ideal coefficient or the maintenance grinding for restoring the driving gauge can serve the purpose. If properly optimized, the importance of the wear research lies in the financial savings. Being the crucial factor for optimization of the intervals between the maintenance grinding, the research is also beneficial. A high-quality wear prediction can be seen as the key field in order to increase the safety of the railway vehicles operation as well. Therefore, the wear research is made using several methods, such as the computational models, the multi-body dynamics software and the technical experiments. This thesis introduces a conceptual design of the test, enabling the wear research via experimental approach. The final device is capable of a simulation of both volume and fatigue wear during the states the railway wheel and railway undergo including riding on the straight track, passing through an arc or a wheel slip during braking.
|
guest ::
RSS feed.