|
|
The study of rehabilitation alternatives selected of sewer network
Novák, Tomáš ; Hluštík, Petr (referee) ; Raclavský, Jaroslav (advisor)
The topic of my bachelor thesis is an evaluation of alternative solutions in terms of a reconstruction of a section of a sewage system using trenchless technology. For this purpose, the work is split into two parts. The main goal of the first, theoretical part is an introduction into trenchless technology and its description. The focus is particularly put on methods used for a new construction, eventually a number of renovation methods, which keep the construction of the rehabilitated conduit. Besides the description of the individual methods, the first part also contains their technological procedure, and their positives and negatives. The second part further uses the newly gained knowledge to solve a specific case on the Veveří street in Brno city. As the reconstructed section of the sewage network is in the built up area of the city, the primarily reflected possibility for the reconstruction in the work is trenchless technology.
|
|
|
Modular series of workshop mobile portal cranes
Novák, Tomáš ; Nezbeda, Jiří (referee) ; Škopán, Miroslav (advisor)
The Master’s thesis deals with the proposal of a modular series of workshop mobile gantry cranes with a load capacity from 500 kg to 3.200 kg. The introduction deals with the recherche, in which the workshop mobile gantry crane is firstly categorized according to the construction. Then, its parts are described in detail and at the end of the recherche, cranes with similar utility properties are presented. The main part of the work is focused on the proposal of the modular series, the proposal of the load-bearing structure and the strength calculations of the load-bearing parts. At the end of the work, there is a check of calculations according to the FEM model, an estimate of the crane price and a proposal configurator for a quick search of a required crane by a customer. The work includes appendices in which the parameters and calculated values of all gantry cranes of the module series are given.
|
|
|
Proposed Process of Order Management
Novák, Tomáš ; Vyhňáková, Michaela (referee) ; Jurová, Marie (advisor)
The bachelor thesis focus on process management of a contract in manufacturing company Biokron s.r.o. This company specializes in the production of feed and compound feed for domestic and livestock. In the first part describes the theoretical basis of the thesis. The second part focuses on the introducing the selected business. The third part describes and analyzes the process of order management the receipt of the order, through production to the dispatch of the product to the customer. The last part outlines proposals for changes in the process of order management in the company.
|
|
|
Verifikation of machine component strain
Novák, Tomáš ; Dočkal, Aleš (referee) ; Drápela, Miloslav (advisor)
The thesis deals with a comparative analysis of strain of parts using finite element method (FEM) and measurement of the optical system Pontos. Part was used the reflector of Volkswagen Polo. The subject of comparing were the values of deviations optical shield of reflector which excitation random vibration described power spectral density. The thesis presented describes of experimental measurements to obtain the boundary conditions using optical systems. FEM analysis was performed using software ANSYS Workbench 12.
|
|
| |
|
|
Apartment rent and the factors that influence it in the city of Prostějov
Novák, Tomáš ; Weigel, Lubomír (referee) ; Horňáková, Romana (advisor)
This thesis is focused on the analysis and comparison of rental apartments in Prostejov and all the factors that have the level of rents in the area of influence. The work presents textual and graphical part of a designated location according to the amount of rent in various parts of the city Prostejov flats of sizes 1 + 1, 1 + KK, 2 + 1, 2 + KK, 3 + 1, 3 + KK. These dispositions are examined and appreciation is shown in tables and graphs. The result is a calculation and comparison of individual dispositions rent flats and assess the factors that have influence on the price.
|
|
|
Current distribution on linear antennas
Novák, Tomáš ; Bártík, Hynek (referee) ; Nováček, Zdeněk (advisor)
This work will describe current distribution measurement problems along antenna conductor using a probe (coupling loop), which is attached to selective micro-voltmeter, which will indicate signal level (voltage). The signal level will be used for representing the current distribution. Subsequently, measuring workplace issues from generator to antenna conductor, probe and selective micro-voltmeter, will be discussed. Analysis of voltages of this link-up and additional study will be conducted. Other parameters, which complement this situation, will be calculated from the current distribution. A computer program, which calculates these parameters and speeds up the collected data processing, will be used for this process.
|
|
|
Mobil cranes with lifting capacity from 200 to 1200 tons
Novák, Tomáš ; Pokorný, Přemysl (referee) ; Škopán, Miroslav (advisor)
The bachelor thesis deals with the development, construction and current types of mobile cranes with a load capacity from 200 to 1200 tonnes. The introductory pages of the thesis deal with the basic concepts in the field of cranes as well as with the brief history of the origin of these machines. The main part of the work focuses on categorization, introduction of the world's major manufacturers, a detailed description of the parts of the mobile crane, and the differences in the technologies used by the individual manufacturers. The manufacturers mentioned are companies Liebherr, Tadano Faun, Tadano Demag, Manitowoc Grove, Link-Belt, Sany and XCMG. The next part of the thesis deals with an overview of the individual manufacturers‘ concepts and their specific parameters. The last part of the thesis consists of several clearly arranged charts that compare the selected models according to their maximum load capacity, maximum hoist height, maximum radius, and other selected parameters. The thesis also includes chapters focused on the specifics of the operation and the maintenance of mobile cranes and determines development trends.
|
|
|
Information System Assessment and Proposal of ICT Modification
Černá, Natálie ; Mgr.Tomáš Novák (referee) ; Koch, Miloš (advisor)
This diploma thesis is dealing with the assessment of the information system of the selected business unit in company AUTOCONT, a.s. and suggests changes for improvement of its current situation. The practical part of this thesis presents an analysis of the current situation of company and an analysis of the information system providing communication and collaboration, based on theoretical knowledge. With the result of the analysis a suggested solution is presented to eliminate found deficiencies and support improvement of work efficiency and to achieve strategic goals of the company.
|
|
| |
guest ::
RSS feed.