|
|
Stand-up power wheelchair
Juříček, Václav ; Maňas, Pavel (referee) ; Černý, Michal (advisor)
This thesis deals with the structural design and manufacture of special power wheelchair prototype in collaboration with company Brano. Remarkable feature of this wheelchair is the ability to pull its user to an upright position, offering the greater independence, self-sufficiency and medically positive impact on physical functions. The content of this thesis is devoted to a search of the current state of knowledge in the matter, structural analysis of complete wheelchair assembly with a detailed description of each component including the important calculations and analyzes, as well as a description of the wheelchair testing. The conclusion presents summarization of all the results in structural, technological and economic terms.
|
|
|
The design of two axis solar tracker
Krejčí, David ; Maňas, Pavel (referee) ; Klapka, Milan (advisor)
The purpose of this dissertation is to design the dual-axis solar tracker carrying the concentrator photovoltaic panels. The preamble of the dissertation shortly examines a photovoltaic cells development up to concentrators and the common support structures of solar power plants. The second part focuses on the engineering process itself. It includes the choice of the variant that suits best the requirements, the calculations of wind load and design of the various joints. The conclusion part is devoted to the evaluation, economy analysis of the construction and proposals for improvements.
|
|
| |
|
|
Study of behaviour of EHD lubricated contact of machine parts within non-smooth surfaces
Zapletal, Lukáš ; Maňas, Pavel (referee) ; Vaverka, Michal (advisor)
Master’s thesis deals with development of software application to calculate contact pressure in eleastohydrodynamic lubricated contact in order to use previously obtained data of the lubricating film thickness. The introduction contains a short overview of methods used for the study of film thickness and contact pressure. Custom work includes a contact pressure solution derived from a film thickness, a description of the developed software and analysis of algorithms used for its compilation. The last part deals with the verification of algorithm, application of software for calculating the contact pressure on the rough surface and analysis of the results. The conclusion includes a summary and possible application of software in practice.
|
|
|
Design of aircraft power unit
Poledno, Martin ; Maňas, Pavel (referee) ; Nevrlý, Josef (advisor)
This diploma thesis deals with basic design and calculation of an aircraft power unit (APU). For desired shaft power the thermal cycle is calculated. Basic dimensions of compressor, turbine and exhaust system are calculated as well as thermodynamic parameters of air and hot gases along the motor. Corresponding compressor map, turbine map and characteristics of the exhaust system are designed. Based on these characteristics, an effective shaft power is being calculated in various off-design conditions. Dependency of the shaft power vs. altitude is also presented. All the calculations are made in MATLAB. Finally, simplified motor cross-section is created.
|
|
|
Design of frame of recumbent bicycle
Gayer, Tomáš ; Maňas, Pavel (referee) ; Vrbka, Martin (advisor)
The aim of this diploma thesis is evolution of the new model of tricycle. This thesis describes process of engineering from design of several parts and whole frame in CAD system Autodesk Inventor, to creating complete drawing documentation. Next part of this thesis is focused on basic static-structural analysis using finite element method in software ANSYS Workbench and determining boundary conditions for this analysis. The final part is about visualization of the new tricycle.
|
|
|
Design of device for inspection of final casting
Kutílek, Tomáš ; Maňas, Pavel (referee) ; Vaverka, Michal (advisor)
This thesis is focused on construction of device for inpection of final casting for machine casting dedicated for tension of car cam belt. Device for inpection of final casting is operated by pneumatic parts and is intended to check operational parts of the machine casting. Control is designed directly to enterprise production. It is constructed according to the custom requirements and it’s operability was confirmed on a prototype. It’s construction solves the problems with manual checking. General analysis of machine cast checking as well as analysis of machine casting dedicated for tension of car cam belt in the submitting company is included in the thesis. Moreover, the thesis comprises of discussion of the construction itself, discussion of pneumatic operating elements and economical and technological review.
|
|
|
Design of mountain-bike crossbar and its FEM analysis
Jelínek, Martin ; Maňas, Pavel (referee) ; Vrbka, Martin (advisor)
The aim of this diploma thesis is the part of evolution of the new bicycle frame for mountain biking, category enduro. The first part of this thesis is focused on creating dimensional modified model of the bike frame in CAD system SolidWorks. Subsequently this frame will be detailed by FEM analysis in software ANSYS Workbench and determine boundary conditions for this analysis. The final part is about visualization of the new bike frame.
|
|
|
Computational modelling of strain and stress in spur gearing using FEM
Ševčík, Martin ; Maňas, Pavel (referee) ; Vrbka, Martin (advisor)
This diploma thesis deals with computation modeling of spur gearing using FEM. The methodology of checking calculation was suggested for gears which are not possible to check only by using standard ČSN 01 4686. The analysis of influence of vicinity of stress concentration on stress distribution in tooth root was performed. It is possibility to use the gears with thinner rim than the standard ČSN 01 4686 recommends. The main part of this work is devoted to fatigue crack propagation study in gears with thin rim. Aiding T-stress the influence of constraint and stress multiaxiality on crack propagation was taking into account. The predicted fatigue crack propagation paths were compared with certain experimental data. It is demonstrated that the considering of influence of constraint improves estimation of consequent crack propagation direction and in some cases the influence of constraint can significantly change the estimated crack propagation path.
|
|
|
Calculation of storage tank structure for sewage treatment plant
Pečenka, Lukáš ; Maňas, Pavel (referee) ; Prokeš, František (advisor)
This diploma thesis is focused on finite element analysis of storage tank. The designed computational model in this work is based on existing storage tank documentation. Diploma thesis is divided into parts. Introduction part consists of various storage tanks types description and basis of finite element method. Next part contains methodical process of computational model designs, its characteristics and purpose. Designed models are loaded with set of specific border conditions. These tests are evaluated and described more closely. After that, the table of results is created and von Misses stress of all models is compared. The best model matching real construction is selected after this compare. The final part of this work consists of suggested construction changes based on the analysis results.
|
guest ::
RSS feed.