|
|
Comparison of microscopic diagnostic methods
Veselý, Jakub ; Tihlaříková, Eva (referee) ; Čudek, Pavel (advisor)
This thesis deals with the description and comparison of diagnostic methods, transmission electron microscopy, scanning electron microscopy and atomic force microscopy. The introduction is a description of diagnostic methods. The following experimental section dealing with the diagnosis of ferritic chromium steel sample methods of scanning electron microscopy, atomic force microscopy, transmission electron microscopy and the evaluation and interpretation of measured results. The conclusion provides a comparison, the advantages and disadvantages of diagnostic methods.
|
|
|
Voltage contrast method in ESEM
Krňávek, Martin ; Čudek, Pavel (referee) ; Jirák, Josef (advisor)
This work contains theoretical description of basic features and principles of electron microscopy, with focus on environmental scanning electron microscopy. It describes function of the microscope, interactions that takes place after collision of electron pack with a sample, mainly it describes creation of back reflected electrons and secondary electrons and methods of voltage contrast. The practical part focus on voltage contrast issue by observing decomposition of electric potentials on surface of semiconductor devices and it establishes ideal working conditions for observing voltage contrast by scintillation detector of secondary electrons.
|
|
|
Voltage contrast method in ESEM
Krňávek, Martin ; Čudek, Pavel (referee) ; Jirák, Josef (advisor)
This work contains theoretical description of basic features and principles of electron microscopy, with focus on environmental scanning electron microscopy. It describes function of the microscope, interactions that takes place after collision of electron pack with a sample, mainly it describes creation of back reflected electrons and secondary electrons and methods of voltage contrast. The practical part focus on voltage contrast issue by observing decomposition of electric potentials on surface of semiconductor devices and it establishes ideal working conditions for observing voltage contrast by scintillation detector of secondary electrons.
|
|
|
Method for signal level value evaluation in ESEM
Potoma, Jaroslav ; Jirák, Josef (referee) ; Čudek, Pavel (advisor)
This work deals with problematics of enviromental scanning electron microscopy and detection of signal electrons by ionization detector.The main goal of this work is to present a comparison of osciloscopical method for evaluation of signal level with method for evaluation of signal level from grayscale of common sample images. Evaluation of advantages and disadvantages of both methods.
|
|
|
Scintillation Secondary Electrons Detector for ESEM
Čudek, Pavel ; Kadlec, Jaromír (referee) ; Rek, Antonín (referee) ; Jirák, Josef (advisor)
The thesis deals with the scintillation secondary electron detector for environmental scanning electron microscope, its design and construction. The starting point was numerical simulation of electrostatic fields and electron trajectories in the electrode system of the detector and simulation of pressure distribution and flow of gases in different parts of the detector. On the basis of modeling and simulation, construction changes of the detector were gradually implemented. Detection efficiency of each version of the detector was determined by the method described in the work. This method enables to evaluate signal level from the captured images of the specimen, quality of images was stated from signal to noise ratio. The thesis describes the whole process of the detector improvement from initial state, when the detector operated with lower efficiency in the pressure range from 300 to 900 Pa, to final version that enables usage of the detector in the range from vacuum up to 1000 Pa of water vapors in the specimen chamber of the microscope.
|
|
|
Scintillation SE Detector for VP SEM
Kozelský, Adam ; Čudek, Pavel (referee) ; Jirák, Josef (advisor)
This work contains description of basic properties and principles of electron microscopy focused on scanning electron microscopy. It describes construction solutions of a microscope, interaction between electron beam and sample, generation of backscattered and secondary electrons. Next chapters are dealing with development of electron microscopy and environmental scanning electron microscopy. The experimental part of this thesis is focuses on the detection of secondary electrons with scintillation detector in environmental scanning electron microscope at higher pressure in the specimen chamber. Concretely is focused on optimization of collecting grid voltage and measurement of pressure dependences.
|
|
|
Semiconductors structures , charge collection method
Golda, Martin ; Čudek, Pavel (referee) ; Špinka, Jiří (advisor)
This thesis treats about semiconducting silicon structures. It describes the characteristics of the element and creation of P and N type of semiconductor and discusses about different types of faults in the crystal lattice. It deals with the description of methods for monitoring faults in semiconductor ie. determining the properties of semiconductors via EBIC, EBIV and CC methods, which are used for analysis of semiconductor devices and materials. Determining the properties of silicon components is being done by generation of charge carriers in the sample loaded in chamber of the scanning electron microscope by high energy electrons. Bellow the sample surface is being generated an electric charge which is being collected by probes. Using this data obtained by EBIC and CC were evaluated diffusion length and lifetime of electrons.
|
|
|
Scintillation SE detector for VP SEM
Račanský, David ; Čudek, Pavel (referee) ; Jirák, Josef (advisor)
First part of this thesis is a theoretical essay which deals with the basics of the variable pressure scanning electron microscope, includes detection of secondary electrons with a view to a scintillation detector. The first applied part of the thesis is focused on prediction, measuring and setting-up optional working parley in vacuum electrodes scintillation detector system, with a stress small diameter hole in screenings C1 and C2. Second applied part was verify a change of working distance between sample and detector in consequence to optional solution for another work.
|
|
|
Contrast in image acquired by ionization detector in VP SEM
Goroš, Pavel ; Čudek, Pavel (referee) ; Jirák, Josef (advisor)
This work deal with problems of investigation materials electron beam. This project is focuses on investigation materials by the help of method environmental scan electron microscopy (ESEM) and describes her patterns. The perfection of ESEM excel above all at studies non - conducting or water containing, often biological samples. These samples not to be in no way prepared or cut – and – dries, in contradistinction to classical scanning electron microscope and thanks is under investigation their native surface structure without desiccation breaking. The general aim is determination of contrast in image acquired by ionization detector.
|
|
|
Scintillation Detector of Secondary Electrons for ESEM
Čudek, Pavel ; Špinka, Jiří (referee) ; Jirák, Josef (advisor)
The thesis deals with modifying and biulding of scintilation detector of secondary electrons for environmental scanning electron microscopy. It describes dilemma of environmental scanning electron microscopy, types of detectors and secondary electrons detection. The experimental part of this thesis focuses on the design and construction of new scintillation detector on the basis of simulations secondary electrons trajectories. Identifying the parameters, pressure dependencies and optimizations of electrode system of the detector realized.
|
guest ::
