|
|
Skid Storage Systems
Vlasák, Ondřej ; Špička, Jiří (referee) ; Škopán, Miroslav (advisor)
The goal of this bachalor´s thesis is to study palletized-material storage systems. The main and most spread types of paletised storage systems are described, including the construction solutions, utilisation and also critical view of each system.
|
|
|
Design of electric tackle
Bádr, Miroslav ; Kašpárek, Jaroslav (referee) ; Škopán, Miroslav (advisor)
Purposes work was create technical documentation to an electrically driven tackle with actuated by hand undercarriage. Was booked up fundamental parameters like bearing, stroke and hoisting speed. First was effected calculation of load on pinion necks and an idle pulley. Subsequently was effected calculation for right election of a rope, an idle pulley, a rope drum and bearings for the rope drum. Up this calculation followed calculation for a right election of an electric motor and a shaft clutch. The documentation was complemented with pictures and tablets, that are seted near single decisive knots of the tackle. To the documentation was creationed how a suggested arrangement drawing so single subassemblies drawings.
|
|
|
Cable reel
Bunda, Petr ; Kašpárek, Jaroslav (referee) ; Škopán, Miroslav (advisor)
The work deals with construction of electrical cable reel with lifting capacity 800 kg, height of lift 20 m and lift speed 10 m/min. In the work is solved design of cable, cable drum and its placing in frame, strenght calculations of the drum and its shafts, check calculations of bearings and keys, choice of suitable drive and its connection to the drum and fastening the whole to the base. Between parts of the work belong component drawings, parts list and assembly dravings with the main measurements and assembly diagram.
|
|
|
Worm conveyor of fine aggregate
Vosika, Jan ; Malášek, Jiří (referee) ; Škopán, Miroslav (advisor)
The main aim of the thesis was to design a horizontal worm-conveyor for the transport of fine aggregate of maximum aggregate gradation of 45 mm, both in terms of construction and strength. The design section of the thesis deals with the problem of an appropriate conveyor driving gear and skidding clutch between the gear and the transport unit according to the amount of transported aggregate. In the computation section, strength check of the drive system is addressed, namely the shaft check, its coupling with the other parts, and the bearing housing. In the last section, the structural design is addressed with respect to safety of operation and ease of maintenance.
|
|
|
Worm conveyor of ciment
Radoš, Pavel ; Malášek, Jiří (referee) ; Škopán, Miroslav (advisor)
This work contains a proposal for construction and workings of a worm conveyor system that can transport 50 tons cement per an hour. The introduction describes my proposal and workings of this machinery. In the calculation, I have mentioned calculation of the main proportions and drive under the relevant norms and self-fortress control of the stressed parts of screw-conveyor. Drawing documentation is worked into the ACad program and contains the configurations of the proposed details sub-assembly storage, worm shaft and welding body formation.
|
|
|
Inclined belt conveyor of corn
Hanzlík, Aleš ; Špička, Jiří (referee) ; Škopán, Miroslav (advisor)
A bachelor thesis objective is engineering design of oblique belt conveyer placed on steel cradle. Firs part of the thesis concentrates on functional analysis and sizing principal dimensions of belt conveyer. Next intent of the thesis is systems design of conveyer drive, tensioning device a supporting structure.
|
|
|
Horizontal worm conveyor
Nadymáček, Tomáš ; Škopán, Miroslav (referee) ; Malášek, Jiří (advisor)
The content of this bachelor’s work is the construction of the horizontal worm conveyor for the transport of the calcareous hydrate, for the transport in the distance of 15 metres. There is a funkcional calculation of the conveyor in the work, assessment of he main dimension and also the design of the drive. There is also perform calculation of the solidity of the shift of the conveyor. All desiderative documentation of the drawings is in the annexes, with the describe main parts and elements of the conveyor.
|
|
| |
|
|
Zpracování Realizačního programu ČR pro stavební a demoliční odpady
Asociace pro rozvoj recyklace stavebních materiálů v ČR, Brno ; Schuster, Václav ; Mertlová, Jana ; Novotný, Bohumil ; Škopán, Miroslav
SWOT analýza nakládání se stavebními a demoličními odpady. Cíle vyplývající z POH ČR. Harmonogram plnění dílčích úkolů a opatření. Normativní, ekonomické, administrativní, informační a dobrovolné nástroje. Postupy prevence a minimalizace vzniku odpadů – varianty. Způsoby nakládání s odpady – varianty (použití betonového recyklátu, použití cihelného recyklátu, použití asfaltového recyklátu). Současné a plánované kapacity zařízení pro nakládání se SDO. Dovoz a vývoz odpadů. Veřejná správa - kompetence – legislativní rámec. Doporučené způsoby nakládání s odpady a návrhy min. standardů. Postupy vedoucí ke snižování environmentálních a zdravotních rizik při nakládání s nebezpečnými odpady. Návrhy pilotních projektů. Environmentální přijatelnost stavu nakládání se SDO. Vzorové příklady nakládání se stavebními a demoličními odpady v ČR, státech EU.
|
|
| |
guest ::
