|
|
Forging of the "lock-bolt"
Frýdl, Pavel ; Štroner, Marek (referee) ; Lidmila, Zdeněk (advisor)
To lock-bolt manufacturing was selected technology of die forging. Lock-bolt is made of 11375 steel in a series of 2700 pieces per year. With the use of literary studies and practical knowledge has been developed technological process fittings. It includes the draft instrument stainless steel 19663 including drawings. Forging is performed on a hydraulic-pneumatic hammer KJH 2 with a nominal value of 20 kJ impact work. Blanks are cut from bars 30 mm 6 m long to bars 52.2 mm long. The techno-economic evaluation shows that the price of a forging is 4,71 CZK and for production will be need 24 pieces of bars.
|
|
|
Precision forging
Berka, Martin ; Peterková, Eva (referee) ; Lidmila, Zdeněk (advisor)
This bachelor´s thesis deals with the technology of precision forging. The thesis describes basic distribution of the forging according to the nature of the material flow and his procedure. After the introductory part this thesis deals with the analysis of the methods of the drop forging with fin groove. The next section contains a description, parameters and methods of precision forging. Technical a economical evaluation of the component technology is as a conclusion of the thesis.
|
|
|
Drop forging of pinion
Cvrček, Jan ; Dvořák, Milan (referee) ; Štroner, Marek (advisor)
The final project has been elaborated in a frame of Bachelor’s studies branch Manufacturing technology assesses design of production pinion by method of die forging. The pinion is manufactured from alloyed structural steel 14 220 (1.7131). Size of production is set on 100 000 pieces per year. The pinion will be forged on the vertical forging press LMZ 1000 A with forming force 10 MN. The forging is formed in two operations. Forming tool is manufactured from alloyed instrumental steel 19 552 (1.2343). In the last chapter of the project is described the price comparison and costs for manufacture of die forging and machining.
|
|
|
Precision forging
Bužga, Petr ; Peterková, Eva (referee) ; Lidmila, Zdeněk (advisor)
The thesis deals with methods, procedures and possibilities of precision forging. After the initial analysis methods of die forging with collar also comprises an overview, analysis and description of methods of precision forging, including a technological evaluation in view of technical possibilities, investment requirements and expected benefits. The main emphasis is laid on the technological conditions, procedure, on the construction of the dies and forging devices.
|
|
|
Sinumerik tools for programming of CNC machine tool
Chytil, Tomáš ; Sámelová, Vendula (referee) ; Polzer, Aleš (advisor)
The bachelor thesis focuses on the usage of possible ways of the Sinumerik system for programming of the form of the drop forging. The first part of the thesis contains of the characteristics of the part and its function in the composition. In the second part there is all the proper visual documentation. The following parts of this piece of work is devoted to the history and specification of the Sinumerik control system and a suggestion on how to make a forging die.The next part is contributed to the possible ways of how to produce a form in the Sinumerik system. The final part deals with the very formation of the programme and its graphic simulation.
|
|
|
Production of forging piece "Spanner"
Vávra, Jan ; Kopřiva, Miloslav (referee) ; Novotný, Karel (advisor)
Projects developed within the bachelor's degree in Mechanical Engineering, presented a proposal technology forged wrench - the hot-rolled steel bars 11 523.0. The thesis also compares the past with conventional methods of production and considering the new technological process of manufacturing. Based on the literature studies about fitting and calculations, was chosen to die forging hammer KHZ 2 A (producer ŠMERAL Brno, plant Hronov), with nominal energy of 20 kJ working pressure of 16 MPa and 30 kW electric power.
|
|
|
Production of forging piece "Spanner"
Vávra, Jan ; Kopřiva, Miloslav (referee) ; Novotný, Karel (advisor)
Projects developed within the bachelor's degree in Mechanical Engineering, presented a proposal technology forged wrench - the hot-rolled steel bars 11 523.0. The thesis also compares the past with conventional methods of production and considering the new technological process of manufacturing. Based on the literature studies about fitting and calculations, was chosen to die forging hammer KHZ 2 A (producer ŠMERAL Brno, plant Hronov), with nominal energy of 20 kJ working pressure of 16 MPa and 30 kW electric power.
|
|
|
Drop forging of pinion
Kameník, Tomáš ; Dvořák, Milan (referee) ; Štroner, Marek (advisor)
KAMENÍK Tomáš: Drop forging of pinion The project has been elaborated within the framework of studies of the subject B 2307 and it presents the lay-out of the technology of the forging – the pinion which is made as the drop forging from the material 14 220. The rougher and the finishing forging die were suggested on the bases of the literature study of the drop forging. In consideration of the big series /100 000 pieces/ and the calculated forging power /25MN/ the component will be made on the vertical forging press LZK 2500P/SH (the manufacturer ŠMERAL Brno a.s.). At the end of the thesis there are performed calculations of the technical and economic evaluation.
|
|
|
Drop forging of hub
Leidorf, Michal ; Kopřiva, Miloslav (referee) ; Štroner, Marek (advisor)
The Baccalaureate thesis deals with literary studies of forging. There is also processed the proposal of technology of ordered steel cog-wheel num.: BP-3-2009- 001. With regard to supposed large series of 150 000 pieces per a year, the technology of stamping on three operations at the vertical forging press LZK 4000B is chosen, the producer Šmeral brno a. s. All calculations were accomplished during the processing of the technological procedure, the following design documentation and technical-economical estimation are connected with the preceding calculations..
|
|
| |
guest ::
