|
|
Magnetic field analysis of synchronous machine
Volf, Tomáš ; Janda, Marcel (referee) ; Skalka, Miroslav (advisor)
The Magnetic Field Analysis Project of Synchronous Machine deals with program for magnetic field analysis of synchronous machine cross section. This program is written in detail along with the necessary theory of synchronous machine and the ANSYS program. After this the program for using different types of sectional wires modification is made – in the concrete for round conductors. It is attained the numeric computing method – The Finite Element Method. To creation of the magnetic field simulation serves ANSYS program, which uses The Finite Element Method.
|
|
|
Influence of magnetic field on photovoltaic solar cell
Kadlec, Michal ; Šubarda, Jiří (referee) ; Šimonová, Lucie (advisor)
This thesis describes the issue of PN junction of photovoltaic cells, photovoltaic effect physics, basic materials used in photovoltaic and their properties, important for the area of photovoltaic. It deals with the problems of magnetism focused on electromagnetic fields. Experimental facility for measuring the influence of magnetic field on the solar cells through the Helmholtz coils was constructed. This work also dealing with the influence of magnetic radiation on photovoltaic cells and the influence of electromagnetic waves on the volt-ampere characteristics of the photovoltaic cell.
|
|
|
Stray losses calculation of induction machine
Jirásek, Tomáš ; Hájek, Vítězslav (referee) ; Ondrůšek, Čestmír (advisor)
The main goal of this thesis is a determination of an idle stray losses in induction machine and creation calculation program in MATLAB. The stray losses are caused especially by the eddy currents on the surface of stator and rotor, further by a pulsation of these currents owing to the periodical change of air-gap permeance, magnetic induction in stator and rotor teeth and a differential leakage. Value of stray losses are different of engine construction especially by it are scoring insulated, uninsulated, straight or slant.
|
|
|
Simulation of circuit breaker maglatch dynamic behaviour
Konšel, Ladislav ; Dostál, Lukáš (referee) ; Valenta, Jiří (advisor)
This work includes the theory of circuit breaker construction and is focused mainly on overload function. It mainly deals with electronic circuit breakers, i.e. equipped with an electronic trip unit. The work is focused on the part of trip unit - maglatch of trip unit. For the purposes of simulation, the geometric model is created. Maxwell program is used for the simulation. The work describes the options for conditions input which are necessary for simulation. Using the distribution of magnetic field intensity and magnetic flux density in the section of trip unit maglatch is determined by the simulation. Furthermore, the force effects acting on the armature of the maglatch are calculated. Force values and the directions acting on the armature are determined by changing the simulation parameters - shift of the armature and coil current. Simulations are performed both for steady-state and for dynamic simulation – movement of armature is taken into account. The supply source for the maglatch is created by an external circuit.
|
|
|
Solution magnetic field distribution in DC machine
Hájek, Jan ; Makki, Zbyněk (referee) ; Janda, Marcel (advisor)
This thesis deals with distribution of magnetic fields in the DC machine. Part of this thesis is the introduction of DC machines, principles of operation and distribution of DC machines. There is also discussed electrically commutated motors. The thesis demonstrates the types of permanent magnets and their properties. Then there is an analysis of the magnetic field electrically commutated motor Atas Nachod in the Ansoft Maxwell. Using Ansoft Simplorer, switching is carried out of the engine. Another part of this work is the analysisthe magnetic field electrically commutated motor Atas Nachod for three types of slot of the stator of the engine. Here it is seen what impact the change has slot on the distribution of magnetic field in the EC motor. Finally, training is carried out measurements of electrically commutated motor BOYANG BY92BL48-4000-2200.
|
|
|
Study of the influence of magnetic fields on biological tissue
Vlachová Hutová, Eliška ; Fiala, Pavel (referee) ; Bartušek, Karel (advisor)
The aim of this research is to explore the influence of magnetic field on early somatic embryos (ESEs) of spruce and pine. The magnetic field is gradual. This is important for the experiment, each cluster of ESE was exposed to magnetic field of different intensity. The resulting report of this experiment consists of the comparison between various methods of image analysis and the difference in growth of ESEs due to different exposure to magnetic field and surrounding temperature. Enclosed is a proposal of ESE size computing algorithm from a given image.
|
|
|
MRI Acquisition and Preprocessing of Image Sequences for Clinical Perfusion Imaging
Krchňavý, Jan ; Bartoš, Michal (referee) ; Jiřík, Radovan (advisor)
This thesis describes the theory for static and dynamic magnetic-resonance imaging using contrast agents affecting T1 relaxation time. The available acquisition methods in the specified facility of Masaryk Oncological Institute in Brno are described. The sequences for subsequent experimental measurements are selected. The used phantoms are described. Acquisition protocol for measuring is described briefly and the evaluation method for the measured data is suggested. The best acquisition sequence and a method of measurements is chosen influenced by estimation of relaxation time T1, sensitivity and signal to noise ratio. Perfusion analysis is executed and perfusion parameters are calculated. The work was supported by the European Regional Development Fund and the State Budget of the Czech Republic (RECAMO, CZ.1.05/2.1.00/03.0101).
|
|
|
Single-Phase Induction Motor Calculation
Vácha, Pavel ; Vítek, Ondřej (referee) ; Hájek, Vítězslav (advisor)
The master´s thesis deal with the thesis of a single-phase induction motor that is more and more used all over the world. Its aim is assembling the information about this type of motor and its calculation. The content of the first part is the theoretical analysis of a single-phase induction motor and acquirement ways of the stroke moment. Than the work contains a project of basic schema of the single-phase induction motor with an auxiliary phase. The practical part is devoted to an elaboration of demonstration example of the single-phase induction motor with concrete parameters calculation, its method was projected before. Than there is practising successived measuring on the motor of the same parameters made firm EMP s.r.o. Slavkov by Brno in this part. In the conclusion there is the evaluation of the whole process with reached results.
|
|
|
Automatization of EM field measurement by Narda NBM-550
Kopecký, Petr ; Bártík, Hynek (referee) ; Nováček, Zdeněk (advisor)
The diploma thesis deals with the measurement of electromagnetic fields by the meter NARDA NBM 550. The aim of the paper is to introduce the possibilities of measurement of the electromagnetic field by this device, to study the feasibility of communication with computer, to create control program and to check its functionality. A description of the electromagnetic field properties is followed by the identification of the device main functions. Additionally, the operating program is described together with the draft of measuring workplace with its realization. The results of probationary measurements are presented in the end of the thesis.
|
|
|
Optimization of method for susceptibility measurement
Jeništa, Petr ; Marcoň, Petr (referee) ; Bartušek, Karel (advisor)
The aim of this thesis is measure the specimens placed in field of MR tomograph, the measured data to evaluace the process and measurement errors. The theoretical part is focused on describing basic parameters of magnetic field, commissioning some older methods of measurement and design methods for the measurement of samples not issuing MR signal. There is performed modeling for the proposed Metod and the 1D, 2D and 3D environments using COMSOL Multiphysics. The practical part is the measurements samples in the tomograph the Institute of Scientific Instruments Academy of Science in Brno. The measured data are processed in Marevisi and Matlab programs. The MATLAB program is written for processing, analysis and data evaluation, after which it is possible to determine the value of the magnetic susceptibility of the selected samples. In conclusion of the work is the quantification accuracy of measurements.
|
guest ::
