National Repository of Grey Literature 122 records found  beginprevious92 - 101nextend  jump to record: Search took 0.01 seconds. 
Production of short shaft by extrusion
Hondl, Jiří ; Šlais, Miroslav (referee) ; Forejt, Milan (advisor)
HONDL Jiří: Production of short shaft by extrusion. The project prepared as part of the Master-degree studies in the Engineering technology concerns the technology design for manufacturing a short shaft by extrusion. On the basis of the study cold forming methods and problems and following technical calculations was designed a four steps process of forming. Semifinished product has a cylinder shape with a diameter of 18mm and a length of 51,2mm. The production is designed for automatic multistage press TPZK 25 with nominal pressing force of 5 000kN from Czech producer and supplier of machinery Šmeral Brno company. Tools are made of tool steel, extrusion punch and extrusion die is designed of 19 830.4 steel, and extrusion die´s band is designed of 19 733.4 steel. Tools are designed to be improved by hardening and drawing.
Design of conveyor of couplers
Klár, Pavel ; Ripel, Tomáš (referee) ; Krejsa, Jiří (advisor)
This thesis is focused on the design of conveyor of couplers with regard to the requirements for the resolution, and consisting of several parts. The first part outlines the given issue, short research study and an idea of solution. The next part concentrates on the structural design of the whole conveyor. Then the description of the first part of the conveyor including the structural design and the required calculations follow. Finally, other conveyor parts, the budget and the instruction manual are explained. The thesis includes the related drawings and all necessary calculations for other conveyors parts as well.
Formula Front Wheel Carrier Design Modification
Lněnička, Martin ; Svída, David (referee) ; Ramík, Pavel (advisor)
This thesis deals with the structural design of front wheel hub of Formula Student the car categories in the CAD system. It includes comparison to proposal design of the hubs, different concept of wheel-seat and wheel suspension of a formula cars and a motor-cars. There is described a few version of design front wheel carrier. The first step is proposed assembly wheel of Formula Student and the next step is realized analytic simulation a stress by FEM of the front wheel carrier and his construction modifications.
Freight Elevator
Málek, Ondřej ; Kozok, Zbigněv (referee) ; Škopán, Miroslav (advisor)
This diploma thesis is dealing with rebuilding of a lift with load 1000 kg into lift with load 1500 kg. This thesis is mainly intent on dimensioning of propulsion and choosing of traction means. The frame cage of a lift is counted by MKP analysis.
Pallet Feeder of the Machine Tool Centre
Krenželok, Andrzej ; TOSHULIN, Jaroslav SKLENÁŘ, (referee) ; Novotný, Lubomír (advisor)
The subject of this thesis is the proposal of constructional solution for pallet changer of the vertical machining center. This pallet changer serves for the manipulation with technological pallets between dilatory places of the machining center and charger of pallets. Thanks to this changer the machines share one workpieces´ base. Main accent is not put only on the function but also on the low price of this solution.
Gearbox for portable power generator
Kolka, Roman ; Hubáček,, Tomáš (referee) ; Bradáč, František (advisor)
The submitted project deals with a complete design of a gearbox of a portable ground power generator designed for preflight preparation of helicopters. The gearbox has been designed to meet given specifications, which are based on required electrical parameters of the entire power unit and with regards to parameters of driving turbine engine. The introductory section deals with a kinematical design of transmission gears with regards to required parameters and design constraints. The kinematical design determines whole concept and resulting form of the gearbox. Next part deals with optimization of gearing, the design of wheel bearing, and design of oil system. The implementation part of the project consists in the engineering design of the gearbox, which was made in 3D environment Pro/Engineer. The design is reviewed and first operational results of manufactured and tested gearbox are discussed in the concluding section of this work.
Project of worm gear for lift mechanism
Otisk, Jan ; Malach, František (referee) ; Malášek, Jiří (advisor)
This graduation thesis dwells on a worm gear design for an elevator mechanism in an already existing wheel case with actuator unit S3 for elevator type BOV 320/0,63. The work includes dimensional and control calculation for the worm gear and as an attachment you will find spiral worm and worm gear drawing documentation, including its specific location.
Manufacturing of Components Shaft on a CNC Machine
Důbrava, Petr ; Jaroš, Aleš (referee) ; Kalivoda, Milan (advisor)
Bachelor thesis deals with design and manufacture of rotary part on CNC machines. The first part deals with the analysis and design of the shaft blank. The second part deals with the selection of machines, tools, technology, and process and with NC program. The work also describes the production of components and techno-economic evaluation of production component.
Machining of Rotating Components on a Universal Machine
Motl, Martin ; Kolář, Ladislav (referee) ; Kalivoda, Milan (advisor)
This bachelor’s thesis deals with the proposal manufacturing technology of a rotary component on a universal machine. The main point of this work is a full technological preparation of production of the component shape of shaft. In the following paragraph is proposal used machines and tools for production. Below is a technological and economic evaluation of production and finally is a description of production of sample component.
Design CNC Technology Components Shaft
Škrabálek, Petr ; Kolář, Ladislav (referee) ; Kalivoda, Milan (advisor)
This thesis deals with the technological process of producing welded shaft in company STT Servis, s.r.o. The work is addressed the technological possibilities and production solutions, way to ensure the rotation of the shaft when turning and turning shaped recesses. The main point solution is to use technology for the final machining of the shaft, here are three times compared to machine technology, original, new and proposed. In conclusion the technologies are compared and evaluated.

National Repository of Grey Literature : 122 records found   beginprevious92 - 101nextend  jump to record:
Interested in being notified about new results for this query?
Subscribe to the RSS feed.