|
|
Multifunctional building
Dvořák, Jakub ; Chládek, Ladislav (referee) ; Drobeček, David (advisor)
Dissertation on multifunctional building which is a part of a project which is about a transformation of an industrial district into a residental district with an additional function of shops and services including relaxation zone which is planned on the roof terrace. The dissertation is divided according to the legislation and made in the extent of the documentation of the building.
|
|
|
The Office Building Brno-Husovice
Karlík, Štěpán ; Kalivoda, Tomáš (referee) ; Kalousek, Lubor (advisor)
This diploma thesis deals with a new built office building in Brno-Husovice. The building is situated in a gap site on the street Dukelská třída. The building has four aboveground floors and underground garages. The ground floor is divided into relaxation area and a commercial section with five shopping units. The second and the third floor are designed as a variable office space. The engine room for ventilation is situated on the fourth floor. Construction system is cast-in-place concrete frame. The building is roofed with the green roofs. Foundations are made of large diameter drilled piles.
|
|
|
Multifunctional building
Reif, Tomáš ; Pospíšil, Tomáš (referee) ; Pěnčík, Jan (advisor)
The thesis is a project of a multifunctional building in Olomouc. That is the detached house with a rectangular ground plan, one underground floor and four above-ground floors. In the basement there are public parking garages, an technical room and an engine room of the ventilation. On the first floor there is a cafe and a copy center and the separate entrance for owners of the residential units. There are nine separate residential units on the second to the fourth floor. The house is based on the monolithic footings. The vertical supporting structure are formed by the basement walls in a combination with the monolithic reinforced concrete columns. Horizontal supporting structure is designed from the ceiling panels SPIROLL. The building is covered with flat single-roof construction with a drainage inward disposition.
|
|
|
Brno Trade Fairs Future
Mičková, Markéta ; Hybská, Bohumila (referee) ; Sedláček, Michal (advisor)
The diploma thesis follows the urban planning analysis of the BVV area, which was elaborated in the subject TG02 –Specializovanýateliér. The Diploma Project processes an architectural study of the hotel with a congress center. The request for the proposal was the classification of the building into First Class (**** hotel) according to the Official Uniform Classification of Accommodation Facilities of the Czech Republic, as well as the number of rooms 250. The congressional part should serve more than 2,000 persons. The design responds to the historical urbanism of the BVV area, where it retains and optically complements the view axis to the Z-pavilion. The building also reacts to the height next to the standing mansion. In its close proximity is the lower part of the building with the congress center, the height part with rooms is located on the opposite side, at the sports hall. The object is optically divided into two parts - a lower base and a "growing" height part with room. The congress and the hotel part are optically separated by planing offsets and façade solutions. Lower, congress, part orbit horizontal aluminum lamellas, instead, the hotel creates vertical lamellas. These lamellas serve not only as optical separation but also as shading.
|
|
|
Implementation of the gross substructure of a residential building in Jihlava
Mironiuková, Iveta ; Venkrbec, Václav (referee) ; Vlčková, Jitka Laura (advisor)
The object of the bachelor thesis is a coarse substructure of the apartment building. This building is eight-storey building. Three floors are garages and five floors are flats. The building is in the courtyard of a former factory TESLA at Jihlava. The bachelor thesis mainly deals with the stages in which there are processed technical regulations: earthwork and foundation of the building. The bachelor thesis also addresses building equipment, scheduling, itemized budget, proposal of mechanical assembly, inspection and test plan and safety and health protection during the work.
|
|
|
Multifunctional Building in Čáslav
Merenus, Vojtěch ; Matoušková, Ilona (referee) ; Kalousek, Lubor (advisor)
The purpose of the diploma thesis is to design a multi-functional bulding, which fill an empty space on the corner of two streets near the historical city centre of Čáslav. This building has mainly a residential function. Basement will be used for parking and as a place for technical room. Commercial use is forseen for the first floor. Other floors will be set by 18 flats. The main goal is to solve a disposition for given purpose, to choose a right type of structure and work up chosen part of project documentation for building permission. Blueprints will be made in a proper CAD program.
|
|
|
Tracking Air Pollutants by Using Wireless Sensor Network
Válek, Tomáš ; Šimek, Václav (referee) ; Tříska, Vít (advisor)
This thesis discusses design and production of a prototype of a device and implementation of a firmware for this device. Its function is to wirelessly monitor a concentration of pollutants like carbon monoxide and propane-butane in an atmosphere. Motivation is to allow parking of vehicles with engine gaseous fuels in underground collective garages for public use according to ČSN 73 6058 standard. The prototype of the device has been designed so that it could be used not only in collective garages but also in garages of family houses. The device was successfully designed, produced and programmed so that it can be deployed in real-world conditions.
|
|
|
Apartment building in Třebíč
Kašík, Vojtěch ; Woytela, Jindřich (referee) ; Sukopová, Dáša (advisor)
The theme of the bachelor thesis the elaboration of design documents for a siting permit. The apartment building is in a sloping terrain. The building itself is composed of one ground floor, which is underneath the level of terrain and three stories above the ground. The footing of the building is made from unreinforced concrete and the load-bearing wall are made from ceramic blocks. The system of insulation is thermal contact insulation. The horizontal roof construction is made of steel reinforced concrete panels. The roof itself is flat and single-skinned. On the ground floor, we can find a garage, storage rooms, utility room a baby-carrier storage. There are four appartement unit on the first two floors. On the last floor, we can find 2 appartement units, which in total adds up to 10 appartement for the whole building. In front of the building, we can find a parking lot.
|
|
|
Extension and modernization of social services facilities Nitrava
Mitura, Daniel ; Krupica, Roman (referee) ; Hradil, Dušan (advisor)
The subject of this diploma thesis is the assessment of the existing facility of social services and the proposal for the modernization of the complex of objects in the facility. To date, the objects are fully utilized. Existing buildings Panel apartment building "A", Panel apartment building "B" and Connecting corridor "D". The existing construction object "C" will be demolished in its entirety. The diploma thesis focuses on the new construction object Extension, which has the task of replacing object "C" and modernizing the social services facility so that it meets the standard conditions. The proposed building is located on land that is accessible from Železničiarska street on the outskirts of Nitra. The extension is located on the north side of the land. The main entrance to the building is solved by crossing the Connecting Corridor. The building has two underground and four above-ground floors. On the 1st floor, there are pharmacy premises, a kitchen with a buffet and facilities, toilets and connecting corridors. In the northwest corner there is a warehouse for landscaping the green areas of the property. In the 1st floor there is a boiler room, a cleaning room and collective garage spaces, which also go into the 2nd floor. The dining room, toilets and chapel are located on the 2nd floor. On the 3rd floor, the premises of the dialysis clinic, workshops and rest rooms serving as clubhouses are accessible from the connecting corridor. On the 4th floor there is an exit to the flat green roof. All floors are connected vertically by two interior staircases and elevators. The supporting system of the substructure is designed from monolithic waterproof reinforced concrete. The structure of the upper structure mainly consists of prefabricated reinforced concrete columns and beams. The rigidity of the upper structure is solved by two stiffening monolithic reinforced concrete cores, in which vertical communications are placed. The supporting elements of the ceilings are designed from prestressed ceiling panels and monolithic reinforced concrete slabs. The building is covered with a green single-layer flat roof. The insulation of the perimeter structures is designed with the ETICS contact insulation system made of mineral wool. The foundation structures are designed as monolithic grids.
|
|
|
Apartment house, Na Větrníku
Schmidt, Jan ; Krupica, Roman (referee) ; Müller, Jan (advisor)
The final thesis is focused on a design of an apartment house and processing of the design documentation. Designed building is situated on the periphery of the town Chrudim in the locality of the housing estate Na Větrníku. It’s a detached house with five floors and a basement. Building has a rectangular plan with dimensions 30,92 × 17,17 m. The foundation of the building is designed as a combination of piles and strips. The vertical constructions will be made of the clay blocks. The floor structures are designed as cast-in-place reinforced concrete floors. The apartment house has a saddle roof with a slope 15°. There are 25 apartments in the building and the mass garages for 15 cars, which are situated in the basement. The garages will serve to the residents of the house.
|
guest ::
